Copyright (c) 2018 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Intermolecular Interactions and Refractive Indices: Experimental Data and Prediction of Oxygenated Fuel Additives with Hydrocarbons
Corresponding Author(s) : Sanjeev Maken
Asian Journal of Chemistry,
Vol. 30 No. 9 (2018): Vol 30 Issue 9
Abstract
Oxygen containing compounds specifically alkanol and ether are being used as oxygenate fuel additives. The refractive indices (nD) of oxygenated fuel additive, aliphatic and aromatic hydrocarbon and their mixtures were measured at 298.15 K to 318.15 K. The mixtures selected were diisopropyl ether (DIPE) + benzene, toluene, n-alkane (C6-C8) or benzene, toluene (1) + alkane (2) and all possible combinations of alkanes at 298.15 K to 318.15 K. Various mixing rules like Gladstone-Dale, Arago-Biot, Heller, Weiner, Newton and Erying–John were applied for the theoretical estimation of refractive index and compared with experimental refractive indices of binary mixtures. Polynomial equation was applied to the measured data to calculate standard deviation. The Dn were further interpreted in terms of intermolecular interactions between the oxygenated fuel additive, aliphatic and aromatic hydrocarbons.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- F.E.M. Alaoui, E.A. Montero, J.-P. Bazile, F. Aguilar and C. Boned, J. Chem. Thermodyn., 43, 1768 (2011); https://doi.org/10.1016/j.jct.2011.06.006.
- M. Hajbabaei, G. Karavalakis, K.C. Johnson, J. Guthrie, A. Mitchell and T.D. Durbin, Fuel Process. Technol., 126, 402 (2014); https://doi.org/10.1016/j.fuproc.2014.04.030.
- K.H. Kim, I.S. Choi, H.M. Kim, S.G. Wi and H.J. Bae, Bioresour. Technol., 153, 47 (2014); https://doi.org/10.1016/j.biortech.2013.11.059.
- V.R. Surisetty, A.K. Dalai and J. Kozinski, Appl. Catal. A, 404, 1 (2011).
- F. Ancillotti and V. Fattore, Fuel Process. Technol., 57, 163 (1998); https://doi.org/10.1016/S0378-3820(98)00081-2.
- M. Karabektas, G. Ergen and M. Hosoz, Fuel, 115, 855 (2014); https://doi.org/10.1016/j.fuel.2012.12.062.
- Regulation 715/2007 of the European Parliament Ad of the Council on Type Approval of Motor Vehicles with respect to Emissions from Light Passenger and Commercial Vehicles (Euro 5 and Euro 6) (2007).
- Directive 2009/30/EC of the European Parliament Ad of the Council on the Specification of Petrol, Diesel and Gas-Oil and Introducing a Mechanism to Monitor and Reduce Greenhouse Gas Emissions (2009).
- C. Dees, M. Askari and D. Henley, Environ. Health Perspect., 104 (Suppl. 6), 1289 (1996); https://doi.org/10.1289/ehp.961041289.
- S. Verma, S. Gahlyan, M. Rani and S. Maken, Arab. J. Sci. Eng., (2018); https://doi.org/10.1007/s13369-018-3276-1.
- N.T.A. Othman and M.P. Ngaliman, Indian J. Sci. Technol., 9, 1 (2016); https://doi.org/10.17485/ijst/2016/v9i21/95246.
- K. Partibha, K. Kumar, S. Gahlyan, M. Rani and V. Bhankar, J. Mol. Liq., 259, 167 (2018); https://doi.org/10.1016/j.molliq.2018.03.025.
- S. Gahlyan, S. Verma, M. Rani and S. Maken, Asian J. Chem., 30, 731 (2018); https://doi.org/10.14233/ajchem.2018.20685.
- S. Gahlyan, S. Verma, M. Rani and S. Maken, Korean J. Chem. Eng., 35, 1167 (2018); https://doi.org/10.1007/s11814-018-0020-1.
- S. Gahlyan, S. Verma, M. Rani and S. Maken, J. Mol. Liq., 258, 142 (2018); https://doi.org/10.1016/j.molliq.2018.03.003.
- M. Rani, S. Gahlyan, H. Om, N. Verma and S. Maken, J. Mol. Liq., 194, 100 (2014); https://doi.org/10.1016/j.molliq.2014.01.016.
- M. Rani and S. Maken, Thermochim. Acta, 559, 98 (2013); https://doi.org/10.1016/j.tca.2013.02.010.
- S. Gahlyan, M. Rani, I. Lee, I. Moon and S. Maken, Korean J. Chem. Eng., 32, 168 (2015); https://doi.org/10.1007/s11814-014-0200-6.
- S. Gahlyan, M. Rani, S. Maken, H. Kwon, K. Tak and I. Moon, J. Ind. Eng. Chem., 23, 299 (2015); https://doi.org/10.1016/j.jiec.2014.08.032.
- M. Rani and S. Maken, J. Ind. Eng. Chem., 18, 1694 (2012); https://doi.org/10.1016/j.jiec.2012.03.011.
- M. Rani, S. Agarwal, P. Lahot and S. Maken, J. Ind. Eng. Chem., 19, 1715 (2013); https://doi.org/10.1016/j.jiec.2013.02.011.
- S. Gahlyan, S. Verma, M. Rani and S. Maken, J. Mol. Liq., 244, 233 (2017); https://doi.org/10.1016/j.molliq.2017.09.015.
- S. Gahlyan, S. Verma, M. Rani and S. Maken, Korean Chem. Eng. Res., 55, 668 (2017); https://doi.org/10.9713/kcer.2017.55.5.668.
- S. Gahlyan, S. Verma, M. Rani and S. Maken, Korean Chem. Eng. Res., 55, 520 (2017); https://doi.org/10.9713/kcer.2017.55.4.520.
- M. Rani and S. Maken, J. Ind. Eng. Chem., 19, 1760 (2013); https://doi.org/10.1016/j.jiec.2013.01.014.
- T.K. Thanusha, R. Ramesh, A.S.N.A. Fazli, M.Y.M. Yunus and K. Ramesh, ARPN J. Eng. Appl. Sci., 11, 2639 (2016).
- M. Rani, S. Gahlyan, A. Gaur and S. Maken, Chin. J. Chem. Eng., 23, 689 (2015); https://doi.org/10.1016/j.cjche.2014.12.003.
- M. Rani and S. Maken, Korean J. Chem. Eng., 30, 1636 (2013); https://doi.org/10.1007/s11814-013-0076-x.
- J.A. Riddick, W.B. Bunger and T.K. Sakano, Organic Solvents. Physical Properties and Methods of Purification, Wiley, New York, edn 4 (1986).
- R. Gonzalez-Olmos, M. Iglesias, B.M.R.P. Santos and S. Mattedi, Phys. Chem. Liq., 46, 223 (2008); https://doi.org/10.1080/00319100701660411.
- J. George and N.V. Sastry, Int. J. Thermophys., 24, 1697 (2003); https://doi.org/10.1023/B:IJOT.0000004100.28834.0a.
- S. Gahlyan, M. Rani and S. Maken, J. Mol. Liq., 199, 42 (2014); https://doi.org/10.1016/j.molliq.2014.08.011.
- S. Gahlyan, M. Rani and S. Maken, J. Mol. Liq., 219, 1107 (2016); https://doi.org/10.1016/j.molliq.2016.04.011.
- M.I. Aralaguppi, C.V. Jadar and T.M. Aminabhavi, J. Chem. Eng. Data, 44, 435 (1999); https://doi.org/10.1021/je9802266.
- M. Díaz Peña and G. Tardajos, J. Chem. Thermodyn., 10, 19 (1978); https://doi.org/10.1016/0021-9614(78)90144-1.
- J.N. Nayak, M.I. Aralaguppi and T.M. Aminabhavi, J. Chem. Eng. Data, 48, 1152 (2003); https://doi.org/10.1021/je030107c.
- D.C. Landaverde-Cortes, A. Estrada-Baltazar, G.A. Iglesias-Silva and K.R. Hall, J. Chem. Eng. Data, 52, 1226 (2007); https://doi.org/10.1021/je600554h.
- T.M. Aminabhavi, V.B. Patil, M.I. Aralaguppi and H.T.S. Phayde, J. Chem. Eng. Data, 41, 521 (1996); https://doi.org/10.1021/je950279c.
- J.C.R. Reis, I.M.S. Lampreia, Â.F.S. Santos, M.L.C.J. Moita and G. Douhéret, ChemPhysChem, 11, 3722 (2010); https://doi.org/10.1002/cphc.201000566.
- S.K. Garg, T.S. Banipal and J.C. Ahluwalia, J. Chem. Thermodyn., 25, 57 (1993); https://doi.org/10.1006/jcht.1993.1007.
References
F.E.M. Alaoui, E.A. Montero, J.-P. Bazile, F. Aguilar and C. Boned, J. Chem. Thermodyn., 43, 1768 (2011); https://doi.org/10.1016/j.jct.2011.06.006.
M. Hajbabaei, G. Karavalakis, K.C. Johnson, J. Guthrie, A. Mitchell and T.D. Durbin, Fuel Process. Technol., 126, 402 (2014); https://doi.org/10.1016/j.fuproc.2014.04.030.
K.H. Kim, I.S. Choi, H.M. Kim, S.G. Wi and H.J. Bae, Bioresour. Technol., 153, 47 (2014); https://doi.org/10.1016/j.biortech.2013.11.059.
V.R. Surisetty, A.K. Dalai and J. Kozinski, Appl. Catal. A, 404, 1 (2011).
F. Ancillotti and V. Fattore, Fuel Process. Technol., 57, 163 (1998); https://doi.org/10.1016/S0378-3820(98)00081-2.
M. Karabektas, G. Ergen and M. Hosoz, Fuel, 115, 855 (2014); https://doi.org/10.1016/j.fuel.2012.12.062.
Regulation 715/2007 of the European Parliament Ad of the Council on Type Approval of Motor Vehicles with respect to Emissions from Light Passenger and Commercial Vehicles (Euro 5 and Euro 6) (2007).
Directive 2009/30/EC of the European Parliament Ad of the Council on the Specification of Petrol, Diesel and Gas-Oil and Introducing a Mechanism to Monitor and Reduce Greenhouse Gas Emissions (2009).
C. Dees, M. Askari and D. Henley, Environ. Health Perspect., 104 (Suppl. 6), 1289 (1996); https://doi.org/10.1289/ehp.961041289.
S. Verma, S. Gahlyan, M. Rani and S. Maken, Arab. J. Sci. Eng., (2018); https://doi.org/10.1007/s13369-018-3276-1.
N.T.A. Othman and M.P. Ngaliman, Indian J. Sci. Technol., 9, 1 (2016); https://doi.org/10.17485/ijst/2016/v9i21/95246.
K. Partibha, K. Kumar, S. Gahlyan, M. Rani and V. Bhankar, J. Mol. Liq., 259, 167 (2018); https://doi.org/10.1016/j.molliq.2018.03.025.
S. Gahlyan, S. Verma, M. Rani and S. Maken, Asian J. Chem., 30, 731 (2018); https://doi.org/10.14233/ajchem.2018.20685.
S. Gahlyan, S. Verma, M. Rani and S. Maken, Korean J. Chem. Eng., 35, 1167 (2018); https://doi.org/10.1007/s11814-018-0020-1.
S. Gahlyan, S. Verma, M. Rani and S. Maken, J. Mol. Liq., 258, 142 (2018); https://doi.org/10.1016/j.molliq.2018.03.003.
M. Rani, S. Gahlyan, H. Om, N. Verma and S. Maken, J. Mol. Liq., 194, 100 (2014); https://doi.org/10.1016/j.molliq.2014.01.016.
M. Rani and S. Maken, Thermochim. Acta, 559, 98 (2013); https://doi.org/10.1016/j.tca.2013.02.010.
S. Gahlyan, M. Rani, I. Lee, I. Moon and S. Maken, Korean J. Chem. Eng., 32, 168 (2015); https://doi.org/10.1007/s11814-014-0200-6.
S. Gahlyan, M. Rani, S. Maken, H. Kwon, K. Tak and I. Moon, J. Ind. Eng. Chem., 23, 299 (2015); https://doi.org/10.1016/j.jiec.2014.08.032.
M. Rani and S. Maken, J. Ind. Eng. Chem., 18, 1694 (2012); https://doi.org/10.1016/j.jiec.2012.03.011.
M. Rani, S. Agarwal, P. Lahot and S. Maken, J. Ind. Eng. Chem., 19, 1715 (2013); https://doi.org/10.1016/j.jiec.2013.02.011.
S. Gahlyan, S. Verma, M. Rani and S. Maken, J. Mol. Liq., 244, 233 (2017); https://doi.org/10.1016/j.molliq.2017.09.015.
S. Gahlyan, S. Verma, M. Rani and S. Maken, Korean Chem. Eng. Res., 55, 668 (2017); https://doi.org/10.9713/kcer.2017.55.5.668.
S. Gahlyan, S. Verma, M. Rani and S. Maken, Korean Chem. Eng. Res., 55, 520 (2017); https://doi.org/10.9713/kcer.2017.55.4.520.
M. Rani and S. Maken, J. Ind. Eng. Chem., 19, 1760 (2013); https://doi.org/10.1016/j.jiec.2013.01.014.
T.K. Thanusha, R. Ramesh, A.S.N.A. Fazli, M.Y.M. Yunus and K. Ramesh, ARPN J. Eng. Appl. Sci., 11, 2639 (2016).
M. Rani, S. Gahlyan, A. Gaur and S. Maken, Chin. J. Chem. Eng., 23, 689 (2015); https://doi.org/10.1016/j.cjche.2014.12.003.
M. Rani and S. Maken, Korean J. Chem. Eng., 30, 1636 (2013); https://doi.org/10.1007/s11814-013-0076-x.
J.A. Riddick, W.B. Bunger and T.K. Sakano, Organic Solvents. Physical Properties and Methods of Purification, Wiley, New York, edn 4 (1986).
R. Gonzalez-Olmos, M. Iglesias, B.M.R.P. Santos and S. Mattedi, Phys. Chem. Liq., 46, 223 (2008); https://doi.org/10.1080/00319100701660411.
J. George and N.V. Sastry, Int. J. Thermophys., 24, 1697 (2003); https://doi.org/10.1023/B:IJOT.0000004100.28834.0a.
S. Gahlyan, M. Rani and S. Maken, J. Mol. Liq., 199, 42 (2014); https://doi.org/10.1016/j.molliq.2014.08.011.
S. Gahlyan, M. Rani and S. Maken, J. Mol. Liq., 219, 1107 (2016); https://doi.org/10.1016/j.molliq.2016.04.011.
M.I. Aralaguppi, C.V. Jadar and T.M. Aminabhavi, J. Chem. Eng. Data, 44, 435 (1999); https://doi.org/10.1021/je9802266.
M. Díaz Peña and G. Tardajos, J. Chem. Thermodyn., 10, 19 (1978); https://doi.org/10.1016/0021-9614(78)90144-1.
J.N. Nayak, M.I. Aralaguppi and T.M. Aminabhavi, J. Chem. Eng. Data, 48, 1152 (2003); https://doi.org/10.1021/je030107c.
D.C. Landaverde-Cortes, A. Estrada-Baltazar, G.A. Iglesias-Silva and K.R. Hall, J. Chem. Eng. Data, 52, 1226 (2007); https://doi.org/10.1021/je600554h.
T.M. Aminabhavi, V.B. Patil, M.I. Aralaguppi and H.T.S. Phayde, J. Chem. Eng. Data, 41, 521 (1996); https://doi.org/10.1021/je950279c.
J.C.R. Reis, I.M.S. Lampreia, Â.F.S. Santos, M.L.C.J. Moita and G. Douhéret, ChemPhysChem, 11, 3722 (2010); https://doi.org/10.1002/cphc.201000566.
S.K. Garg, T.S. Banipal and J.C. Ahluwalia, J. Chem. Thermodyn., 25, 57 (1993); https://doi.org/10.1006/jcht.1993.1007.