Copyright (c) 2018 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Material Removal Analysis of Soda-Lime Glass by Using Electrochemical Discharge Drilling Process
Corresponding Author(s) : Pravin Pawar
Asian Journal of Chemistry,
Vol. 30 No. 4 (2018): Vol 30 Issue 4
Abstract
The electrochemical discharge machining is integrated by electro-discharge and electro-chemical manufacturing technology. The soda-lime glass is widely used in various fields such as biomedical, optical and industrial industries. Hence, in present study the electrochemical discharge drilling process is applied on soda-lime glass material to find out the material removal rate. The Taguchi method L27 orthogonal array is used for present investigation. The input process parameters are taken as voltage, rotation and electrolyte concentration whereas output response is considered as material removal rate. From this analysis, it is found that voltage is the most dominant parameter for material removal rate followed by electrolyte concentration and rotation for soda-lime glass.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- P. Pawar, R. Ballav and A. Kumar, Int. J. Modern Manuf. Technol., 9, 47 (2017).
- B.H.W.S. de Jong, Glass, In: Ullmann's Encyclopedia of Industrial Chemistry, VCH Publishers, Weinheim, Germany, edn 5, vol. A12 (1989).
- P. Pawar, R. Ballav and A. Kumar, Indian J. Sci. Technol., 10, 1 (2017).
- P. Pawar, R. Ballav and A. Kumar, Mater. Today Proceed., 4, 2813 (2017); https://doi.org/10.1016/j.matpr.2017.02.161.
- P. Pawar, R. Ballav and A. Kumar, Mater. Today Proceed., 2, 3188 (2015); https://doi.org/10.1016/j.matpr.2015.07.113.
- H. Kurafuji and K. Suda, Annals of the CIRP, 16, 415 (1968).
- B. Mallick, B.R. Sarkar, B. Doloi and B. Bhattacharyya, Appl. Mech. Mater., 592-594, 525 (2014); https://doi.org/10.4028/www.scientific.net/AMM.592-594.525.
- V.K. Jain, S.K. Choudhury and K.M. Ramesh, Int. J. Mach. Tools Manuf., 42, 1269 (2002); https://doi.org/10.1016/S0032-3861(02)00241-0.
- R. Wuthrich and V. Fascio, Int. J. Mach. Tools Manuf., 45, 1095 (2005); https://doi.org/10.1016/j.ijmachtools.2004.11.011.
- B.R. Sarkar, B. Doloi and B. Bhattacharyya, Int. J. Adv. Manuf. Technol., 28, 873 (2006); https://doi.org/10.1007/s00170-004-2448-1.
- M. Goud and A.K. Sharma, J. Mechanical Sci. Technol., 31, 1365 (2017); https://doi.org/10.1007/s12206-017-0236-8.
- A.B. Kamaraj, S.K. Jui, Z. Cai and M.M. Sundaram, Int. J. Adv. Manuf. Technol., 81, 685 (2015); https://doi.org/10.1007/s00170-015-7208-x.
- S. Coskun, A.R. Motorcu, N. Yamankaradeniz and E. Pulat, Int. J. Refrig., 35, 795 (2012); https://doi.org/10.1016/j.ijrefrig.2011.12.008.
- H. Liu, J. Zhou and Q. Yu, Asian J. Chem., 26, 5469 (2014); https://doi.org/10.14233/ajchem.2014.18134.
- L. Paul and S.S. Hiremath, Procedia Mater. Sci., 5, 2273 (2014); https://doi.org/10.1016/j.mspro.2014.07.446.
- B. Madhavi and S.S. Hiremath, Procedia Technol., 25, 1257 (2016); https://doi.org/10.1016/j.protcy.2016.08.219.
- L. Paul and S.S. Hiremath, Procedia Eng., 64, 1395 (2013); https://doi.org/10.1016/j.proeng.2013.09.221.
References
P. Pawar, R. Ballav and A. Kumar, Int. J. Modern Manuf. Technol., 9, 47 (2017).
B.H.W.S. de Jong, Glass, In: Ullmann's Encyclopedia of Industrial Chemistry, VCH Publishers, Weinheim, Germany, edn 5, vol. A12 (1989).
P. Pawar, R. Ballav and A. Kumar, Indian J. Sci. Technol., 10, 1 (2017).
P. Pawar, R. Ballav and A. Kumar, Mater. Today Proceed., 4, 2813 (2017); https://doi.org/10.1016/j.matpr.2017.02.161.
P. Pawar, R. Ballav and A. Kumar, Mater. Today Proceed., 2, 3188 (2015); https://doi.org/10.1016/j.matpr.2015.07.113.
H. Kurafuji and K. Suda, Annals of the CIRP, 16, 415 (1968).
B. Mallick, B.R. Sarkar, B. Doloi and B. Bhattacharyya, Appl. Mech. Mater., 592-594, 525 (2014); https://doi.org/10.4028/www.scientific.net/AMM.592-594.525.
V.K. Jain, S.K. Choudhury and K.M. Ramesh, Int. J. Mach. Tools Manuf., 42, 1269 (2002); https://doi.org/10.1016/S0032-3861(02)00241-0.
R. Wuthrich and V. Fascio, Int. J. Mach. Tools Manuf., 45, 1095 (2005); https://doi.org/10.1016/j.ijmachtools.2004.11.011.
B.R. Sarkar, B. Doloi and B. Bhattacharyya, Int. J. Adv. Manuf. Technol., 28, 873 (2006); https://doi.org/10.1007/s00170-004-2448-1.
M. Goud and A.K. Sharma, J. Mechanical Sci. Technol., 31, 1365 (2017); https://doi.org/10.1007/s12206-017-0236-8.
A.B. Kamaraj, S.K. Jui, Z. Cai and M.M. Sundaram, Int. J. Adv. Manuf. Technol., 81, 685 (2015); https://doi.org/10.1007/s00170-015-7208-x.
S. Coskun, A.R. Motorcu, N. Yamankaradeniz and E. Pulat, Int. J. Refrig., 35, 795 (2012); https://doi.org/10.1016/j.ijrefrig.2011.12.008.
H. Liu, J. Zhou and Q. Yu, Asian J. Chem., 26, 5469 (2014); https://doi.org/10.14233/ajchem.2014.18134.
L. Paul and S.S. Hiremath, Procedia Mater. Sci., 5, 2273 (2014); https://doi.org/10.1016/j.mspro.2014.07.446.
B. Madhavi and S.S. Hiremath, Procedia Technol., 25, 1257 (2016); https://doi.org/10.1016/j.protcy.2016.08.219.
L. Paul and S.S. Hiremath, Procedia Eng., 64, 1395 (2013); https://doi.org/10.1016/j.proeng.2013.09.221.