Flocculation Performance and Shearing Capacity Study on Al30 Morphology in Polyhydroxy Aluminium

Abstract

As a newly discovered polyaluminum morphology after Al₁₃, Al₃₀ is the highest charge cation of polyhydroxy aluminum so far. By comparative analyzing synthetic Al₃₀, Al₁₃ and commercial polyaluminum chloride, test results show that Al₃₀ has optimal coagulation effect by contrasting turbidity, UV₂₅₄ removal efficiencies and electric neutralization capacity. The particle size analysis of flocculated kaolin micro particles shows that the three flocculants can combine with kaolin particles below 10 μm. The floc size in Al₃₀ is the largest, followed by Al₁₃ and then polyaluminum chloride, which further proved the advantage of Al₃₀ in flocculation process. The conventional jar test and the monitoring technique of floc size online are employed to investigate the shearing capacity of the flocs formed by Al₃₀. It is found that remixing can make the broken flocs fully recovered and the particle size of recovered flocs are greatly increased, especially in Al₃₀.