Issue

Vol. 25 No. 11 (2013): Vol 25 Issue 11

Copyright (c) 2013 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Study of Damping Properties of Glass Fibers Reinforced Scrap Rubber Composites Prepared by Simple Mixing

https://doi.org/10.14233/ajchem.2013.14332
Mingjun Li
Department of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, P.R. China
Yongwen Xu
Department of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, P.R. China
Yuancheng Qin
Department of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, P.R. China
Yanping Sun
Department of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, P.R. China

Corresponding Author(s) : Mingjun Li

limingjun1958@gmail.com

Asian Journal of Chemistry, Vol. 25 No. 11 (2013): Vol 25 Issue 11

Abstract

A simple and efficient method was developed to prepare glass fibers reinforced scrap rubber composites by simple mixing. The effect of the concentration and length (L)/diameter (D) on the damping and mechanical properties was studied. The optimization values of the concentration and L/D are determined to be 30 g and 4:1, respectively. The interface topography was also studied by SEM to implore the microstructure and damping mechanism of the composites.

Keywords

Scrap rubber composites Damping Glass fibers
Li, M., Xu, Y., Qin, Y., & Sun, Y. (2013). Study of Damping Properties of Glass Fibers Reinforced Scrap Rubber Composites Prepared by Simple Mixing. Asian Journal of Chemistry, 25(11), 6227–6230. https://doi.org/10.14233/ajchem.2013.14332
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. T. Amari, N.J. Themelis and I.K. Wernick, Resour. Policy, 25, 179 (1999).
  2. B. Adhikari, D. De and S. Maiti, Prog. Polym. Sci., 25, 909 (2000).
  3. W. Yang, W.J. Sun, W. Chu, C.F. Jiang and J. Wen, Chinese Chem. Lett., 23, 363 (2012).
  4. D. Ray, S. Sengupta, S.P. Sengupta, A.K. Mohanty and M. Misra, Macromol. Mater. Eng., 292, 1075 (2007).
  5. A. Pietak, S. Korte, E. Tan, A. Downard and M.P. Staiger, Appl. Surf. Sci., 253, 3627 (2007).
  6. S. Panthapulakkal and M. Sain, J. Comp. Mater., 41, 1871 (2007).
  7. K. John and S.V. Naidu, J. Reinf. Plast. Comp., 26, 373 (2007).
  8. M.S. Sreekala, S. Thomas and G. Groeninckx, Polym. Compos., 26, 388 (2005).
  9. L.A. Pothan, P. Potschke, R. Habler and S. Thomas, J. Comp. Mater., 39, 1007 (2005).
  10. L.U. Devi, S.S. Bhagawan and S. Thomas, Polym. Compos., 31, 956 (2010).
  11. H. Anuar, S.H. Ahmad, R. Rasid, A. Ahmad and W.N.W. Busu, J. Appl. Polym. Sci., 107, 4043 (2008).
  12. S. Mandal and S. Alam, J. Appl. Polym. Sci., 125, E382 (2012).
  13. D. Ratna, N.R. Manoj, L. Chandrasekhar and B.C. Chakraborty, Polym. Adv. Technol., 15, 583 (2004).
  14. C. Su, P. He, R. Yan, C.B. Zhao and C. Zhang, Polym. Compos., 33, 860 (2012).
  15. X.G. Diao, A.Y. Takeuchi, F. Garcia, R.B. Scorzelli and H.R. Rechenberg, J. Appl. Phys., 85, 4485 (1999).
  16. J.M. Berthelot and Y. Sefrani, Compos. Sci. Technol., 64, 1261 (2004).
  17. A. Zanchet, L.N. Carli, M. Giovanela, R.N. Brandalise and J.S. Crespo, Mater. Design, 39, 437 (2012).
  18. M. Naghipour, F. Taheri and G.P. Zou, J. Struct. Eng., 131, 1044 (2005).
  19. S. Houshyar, R.A. Shanks and A. Hodzic, J. Appl. Polym. Sci., 96, 2260 (2005).
  20. C. Kyriazoglou and F.J. Guild, Compos. Part A, 36, 367 (2005).
  21. H. Kishi, M. Kuwata, S. Matsuda, T. Asami and A. Murakami, Compos. Sci. Technol., 64, 2517 (2004).
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 0 Download : 0