Issue

Vol. 25 No. 9 (2013): Vol 25 Issue 9

Copyright (c) 2013 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Comparison of Mechanical and Thermal Properties of Polyamide-66/Rubber/Fiber Alloy Composites

https://doi.org/10.14233/ajchem.2013.F25
Ji-Eun Lee
Korea Institute of Footwear and Leather Technology, Danggam-dong, 786-50, Busan, Republic of Korea
Dong-Hun Han
Korea Institute of Footwear and Leather Technology, Danggam-dong, 786-50, Busan, Republic of Korea
Young-Min Kim
Department of Polymer Science and Engineering, Busan National University, Busan, Republic of Korea
Kyung-Man Choi
Department of Polymer Science and Engineering, Busan National University, Busan, Republic of Korea

Corresponding Author(s) : Ji-Eun Lee

jelee@kiflt.re.kr

Asian Journal of Chemistry, Vol. 25 No. 9 (2013): Vol 25 Issue 9

Abstract

This study compared and evaluated the mechanical and thermal properties of three-phase blends of polyamide-66. A series of polyamide-66/polymer blends were prepared using an extrusion and injection process and the blending polymers were rubber, TPU, polyester block polyamide and ionomer. The polymer contents was 10-30 %. The blending polymers were used to improve the moisture absorbance and elastic recovery of polyamide-66. The coupling agent impregnated in the glass fiber was melt blended to increase the miscibility of each composition.

Keywords

Polyamide-66 Alloy Blend Rubber Elasticity Flexibility Strength
Lee, J.-E., Han, D.-H., Kim, Y.-M., & Choi, K.-M. (2013). Comparison of Mechanical and Thermal Properties of Polyamide-66/Rubber/Fiber Alloy Composites. Asian Journal of Chemistry, 25(9), 5237–5244. https://doi.org/10.14233/ajchem.2013.F25
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. G. Illing, Angew. Makromol. Chem., 95, 83 (1981).
  2. S. Cimmino, L. D'Orazio, R. Greco, G. Maglio, M. Malinconico, C. Mancarella, E. Martuscelli, R. Palumbo and G. Ragosta, Polym. Eng. Sci., 24, 48 (1984).
  3. J.-S. Koh, C.-H. Lee, H.-K. Choi, A. Hahn and J.-W. Nah, J. Korean Ind. Eng. Chem., 14, 336 (2003).
  4. S.-J. Kim, S.-M. Lee and J.-S. Kim, J. Korean Ind. Eng. Chem., 11, 414 (2000).
  5. T.-W. Park, C.-G. Lee and J.-R. Haw, J. Korean Ind. Eng. Chem., 4, 601 (1993).
  6. B.-C. Kim, D.-S. Lee and W.-Y. Kim, J. Korean Ind. Eng. Chem., 6, 182 (2000).
  7. K.-Y. Park, S.-H. Park and K.-D. Suh, J. Appl. Polym. Sci., 66, 2183 (1997).
  8. B. Majumdar, H. Keskkula and D.R. Paul, J. Appl. Polym. Sci., 54, 339 (1994).
  9. A. Tedesco, R.V. Barbosa S.M.B. Nachtigall and R.S. Mauler, Polym. Test., 21, 11 (2002).
  10. Y.-B. Chung and S.-H. Ryu, Elastomer, 40, 159 (2005).
  11. W.-N. Kim and C.M. Burns, J. Appl. Polym. Sci., 32, 2989 (1986).
  12. W.-N. Kim and C.M. Burns, J. Appl. Polym. Sci., 34, 945 (1987).
  13. W.-N. Kim and C.M. Burns, Macromolecules, 20, 1876 (1987).
  14. W.-N. Kim, Ph.D. Thesis, University of Waterloo, Waterloo, Ontario (1987).
  15. J. Devaux, P. Godard and J.P. Mercier, J. Polym. Sci. B: Polym. Phys., 20, 1881 (1982).
  16. L.H. Wang, Z. Huang and T. Hong, J. Macromol. Sci.-Phys., B29, 155 (1990).
  17. W.-N. Kim and C.M. Burns, Polym. Eng. Sci., 28, 1115 (1988).
  18. Y.J. Shur and B. Ranby, J. Appl. Polym. Sci., 19, 1337 (1975).
  19. A.R. Shultz and A.L. Young, J. Appl. Polym. Sci., 28, 1677 (1983).
  20. H.K. Reimschuessel, J. Polym. Sci. Macromol. Rev., 12, 65 (1977).
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 0 Download : 0