Issue

Vol. 27 No. 7 (2015): Vol 27 Issue 7, 2015

Copyright (c) 2015 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Influence of Heat Treatment and Dispersing Agent Addition on Hydroxyapatite Powder Properties and its Suspension Characteristics

https://doi.org/10.14233/ajchem.2015.18543
Y.M.Z. Ahmed
Ceramic and Refractory Materials Division, Central Metallurgical Research and Development Institute, P.O. Box 87, Helwan 11421, Egypt
S.M. El-Sheikh
Nano-Structured Materials Division, Central Metallurgical Research and Development Institute, P.O. Box 87, Helwan 11421, Egypt
Z.I. Zaki
Ceramic and Refractory Materials Division, Central Metallurgical Research and Development Institute, P.O. Box 87, Helwan 11421, Egypt

Corresponding Author(s) : Y.M.Z. Ahmed

ahmedymz@hotmail.com

Asian Journal of Chemistry, Vol. 27 No. 7 (2015): Vol 27 Issue 7, 2015

Abstract

Colloidal processing route is considered as a potential way of successfully fabricating a homogeneous and complex shape ceramic body. In this regards, preparation of a well dispersed ceramic suspension is a vital in deciding the suitability of applying this processing route for ceramic green body fabrication. Controlling the physical properties of hydroxyapatite powder through the calcination process would enhance the particle properties in terms of particle size, its distribution and surface area. It was found that hydroxyapatite powder calcined at 1100 °C possesses physical and chemical properties suitable for colloidal processing route. Also the utilizing of calcined powder at 1100 °C with 0.3 wt. % sodium polyacrylate dispersant proved to be beneficial in producing a low viscosity and high turbidity suspensions.

Keywords

Hydroxyapatite Heat treatment Particle size Zeta potential Viscosity Turbidity
Ahmed, Y., El-Sheikh, S., & Zaki, Z. (2015). Influence of Heat Treatment and Dispersing Agent Addition on Hydroxyapatite Powder Properties and its Suspension Characteristics. Asian Journal of Chemistry, 27(7), 2608–2618. https://doi.org/10.14233/ajchem.2015.18543
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. W. Cao and L.L. Hench, Ceram. Int., 22, 493 (1996); doi:10.1016/0272-8842(95)00126-3.
  2. G. Daculsi, Biomaterials, 19, 1473 (1998); doi:10.1016/S0142-9612(98)00061-1.
  3. S. Yamada, D. Heymann, J.-M. Bouler and G. Daculsi, J. Biomed. Mater. Res., 37, 346 (1997); doi:10.1002/(SICI)1097-4636(19971205)37:3<346::AID-JBM5>3.0.CO;2-L.
  4. K. de Groot, Biomaterials, 1, 47 (1980); doi:10.1016/0142-9612(80)90059-9.
  5. W. Suchanek and M. Yoshimura, J. Mater. Res., 13, 94 (1998); doi:10.1557/JMR.1998.0015.
  6. G. de With, H.J.A. van Dijk, N. Hattu and K. Prijs, J. Mater. Sci., 16, 1592 (1981); doi:10.1007/BF02396876.
  7. H.Y. Yasuda, S. Mahara, Y. Umakoshi, S. Imazato and S. Ebisu, Biomaterials, 21, 2045 (2000); doi:10.1016/S0142-9612(00)00090-9.
  8. J. Zhang, M. Maeda, N. Kotobuki, M. Hirose, H. Ohgushi, D. Jiang and M. Iwasa, Mater. Chem. Phys., 99, 398 (2006); doi:10.1016/j.matchemphys.2005.11.020.
  9. S. Padilla, R. Garcia-Carrodeguas and M. Vallet-Regı, J. Eur. Ceram. Soc., 24, 2223 (2004); doi:10.1016/S0955-2219(03)00629-0.
  10. H.Y. Juang and M.H. Hon, Ceram. Int., 23, 383 (1997); doi:10.1016/S0272-8842(96)00020-X.
  11. Y.H. Koh, H.W. Kim, H.E. Kim and J.W. Halloran, J. Am. Ceram. Soc., 85, 2578 (2002); doi:10.1111/j.1151-2916.2002.tb00500.x.
  12. Y. Zhang, Y. Yokogawa, X. Feng, Y. Tao and Y. Li, Ceram. Int., 36, 107 (2010); doi:10.1016/j.ceramint.2009.07.008.
  13. C.Y. Tan, R. Tolouei, S. Ramesh, B.K. Yap and M. Amiriyan, IFMBE Proc., 35, 51 (2011); doi:10.1007/978-3-642-21729-6_18.
  14. N. Patel, I.R. Gibson, S. Ke, S.M. Best and W. Bonfield, J. Mater. Sci.; Mater. Med., 12, 181 (2001); doi:10.1023/A:1008986430940.
  15. A. Sobczak-Kupiec, Z. Wzorek, R. Kijkowska and Z. Kowalski, Bull. Mater. Sci., 36, 755 (2013); doi:10.1007/s12034-013-0482-z.
  16. H.Y. Juang and M.H. Hon, Biomaterials, 17, 2059 (1996); doi:10.1016/0142-9612(96)88882-X.
  17. M. Figueiredo, A. Fernando, G. Martins, J. Freitas, F. Judas and H. Figueiredo, Ceram. Int., 36, 2383 (2010); doi:10.1016/j.ceramint.2010.07.016.
  18. J.A. Toque, M.K. Herliansyah, M. Hamdi, A. Ide-Ektessabi and M.W. Wildan, IFMBE Proc., 15, 152 (2007); doi:10.1007/978-3-540-68017-8_39.
  19. S. Ahmed and M. Ahsan, J. Sci. Ind. Res. (India), 43, 501 (2008).
  20. U. Vijayalakshmi and S. Rajeswari, Trends Biomater. Artif. Organs, 19, 57 (2006).
  21. E. Landi, G. Celotti, G. Logroscino and A. Tampieri, J. Eur. Ceram. Soc., 23, 2931 (2003); doi:10.1016/S0955-2219(03)00304-2.
  22. E. Landi, A. Tampieri, G. Celotti and S. Sprio, J. Eur. Ceram. Soc., 20, 2377 (2000); doi:10.1016/S0955-2219(00)00154-0.
  23. K.P. Sanosh, M.-C. Chu, A. Balakrishnan, T.N. Kim and S.-J. Cho, Bull. Mater. Sci., 32, 465 (2009); doi:10.1007/s12034-009-0069-x.
  24. J. Klinkaewnarong and S. Maensiri, J. Sci., 37, 243 (2010).
  25. T. Tian, D. Jiang, J. Zhang and Q. Lin, J. Eur. Ceram. Soc., 27, 2671 (2007); doi:10.1016/j.jeurceramsoc.2006.10.009.
  26. E. Bouyer, F. Gitzhofer and M.I. Boulos, J. Mater. Sci. Mater. Med., 11, 523 (2000); doi:10.1023/A:1008918110156.
  27. Pratihar, M. Garg, S. Mehra and S. Bhattacharyya, J. Mater. Sci. Mater. Med., 17, 501 (2006); doi:10.1007/s10856-006-8932-4.
  28. A.S.F. Alqap and I. Sopyan, Indian J. Chem., 48A, 1492 (2009).
  29. I. Mobasherpour, M.S. Heshajin, A. Kazemzadeh and M. Zakeri, J. Alloys Comp., 430, 330 (2007); doi:10.1016/j.jallcom.2006.05.018.
  30. S. Bose and S.K. Saha, Chem. Mater., 15, 4464 (2003); doi:10.1021/cm0303437.
  31. G. Guo, Y. Sun, Z. Wang and H. Guo, Ceram. Int., 31, 869 (2005); doi:10.1016/j.ceramint.2004.10.003.
  32. K. Donadel, M.C.M. Laranjeira, V.L. Goncalves, V.T. Favere, J.C. De Lima and L.H. Prates, J. Am. Ceram. Soc., 88, 2230 (2005); doi:10.1111/j.1551-2916.2005.00433.x.
  33. G. Xu, I.A. Aksay and J.T. Groves, J. Am. Chem. Soc., 123, 2196 (2001); doi:10.1021/ja002537i.
  34. K. Lin, J. Chang, R. Cheng and M. Ruan, Mater. Lett., 61, 1683 (2007); doi:10.1016/j.matlet.2006.07.099.
  35. Y. Sun, G. Guo, Z. Wang and H. Guo, Ceram. Int., 32, 951 (2006); doi:10.1016/j.ceramint.2005.07.023.
  36. G. Felício-Fernandes and M.C.M. Laranjeira, Quim. Nova, 23, 441 (2000); doi:10.1590/S0100-40422000000400002.
  37. I. Sopyan, R. Singh and M. Hamdi, Indian J. Chem., 47A, 1626 (2008).
  38. J.C. Elliott, Structure and Chemistry of the Apatites and Other Calcium Orthophosphates, Amsterdam: Elsevier, pp. 387 (1994).
  39. P. Moens, F. Callens, P. Matthys, F. Maes, R. Verbeeck and D. Naessens, J. Chem. Soc., Faraday Trans., 87, 3137 (1991); doi:10.1039/ft9918703137.
  40. I.R. Gibson, I. Rehman, S.M. Best and W. Bonfield, J. Mater. Sci. Mater. Med., 11, 533 (2000); doi:10.1023/A:1008961816208.
  41. A.D. Randolph and M.A. Larson, Theory of Particulate Processes, Academic Press, New York, edn 2, pp. 369 (1986).
  42. J. Gomez-Morales, J. Torrent-Burgues and R. Rodriguez-Clemente, Cryst. Res. Technol., 36, 1065 (2001); doi:10.1002/1521-4079(200110)36:8/10<1065::AID-CRAT1065>3.0.CO;2-G.
  43. M.R. Saeri, A. Afshar, M. Ghorbani, N. Ehsani and C.C. Sorrell, Mater. Lett., 57, 4064 (2003); doi:10.1016/S0167-577X(03)00266-0.
  44. S. Bhattacharjee, S.K. Swain, D.K. Sengupta and B.P. Singh, Colloids Surf. A, 277, 164 (2006); doi:10.1016/j.colsurfa.2005.11.057.
  45. Z. Sadeghian, J.G. Heinrich and F. Moztarzadeh, Ceram. Int., 32, 331 (2006); doi:10.1016/j.ceramint.2005.02.016.
  46. T. Navizi, E. Salahi, M. Ghafari and I. Mobasherpour, Ceram. Int., 36, 1945 (2010); doi:10.1016/j.ceramint.2010.05.015.
  47. F. Lelievre, D. Bernach-Assollant and T. Chartier, J. Mater. Sci. Mater. Med., 7, 489 (1996); doi:10.1007/BF00705430.
  48. A.B. Corradi, T. Manfredini, G.C. Pellacani and P. Pozzi, J. Am. Ceram. Soc., 77, 509 (1994); doi:10.1111/j.1151-2916.1994.tb07022.x.
  49. S. Baklouti, C. Pagnoux, T. Chartier and J.F. Baumard, J. Eur. Ceram. Soc., 17, 1387 (1997); doi:10.1016/S0955-2219(97)00010-1.
  50. L.A. Cyster, D.M. Grant, S.M. Howdle, F.R.A.J. Rose, D.J. Irvine, D. Freeman, C.A. Scotchford and K.M. Shakesheff, Biomaterials, 26, 697 (2005); doi:10.1016/j.biomaterials.2004.03.017.
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 0 Download : 0