Copyright (c) 2015 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Study of Novel Low Surface Energy Antifouling Coating Prepared with Silicon-Modified Acrylic Resin and Nano-TiO2
Corresponding Author(s) : Haofei Huang
Asian Journal of Chemistry,
Vol. 27 No. 4 (2015): Vol 27 Issue 4
Abstract
In this paper, a novel low surface energy antifouling coating was prepared by applying a synthesized silicon-modified acrylic resin and being modified with nano-TiO2. According to the IR spectrum of the synthesized resin, it was suggested that the polymerization reacted completely between organic silicon and acrylate. The GPC analysis showed the molecular weight was moderate and its distribution was narrow. Low surface energy antifouling coating was prepared by spreading nano-TiO2, ferric oxide and talcum powder into this resin. The results exhibited that this coating had remarkable low surface energy property with a contact angle > 105°. The seawater exposure test (3 month) by applying this coating also gave very good results.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- D.M. Yebra, S. Kiil and K. Dam-Johansen, Prog. Org. Coat., 50, 75 (2004); doi:10.1016/j.porgcoat.2003.06.001.
- Z. Xu and Y.Q. Ou, Corros. Sci. Prot. Technol., 24, 192 (2012).
- R.F. Brady Jr., Prog. Org. Coat., 35, 31 (1999); doi:10.1016/S0300-9440(99)00005-3.
- R.L. Townsin, Biofouling, 19 (Suppl. 1), 15 (2003); doi:10.1080/0892701031000088535.
- L.D. Chambers, J.A. Wharton, R.J.K. Wood, F.C. Walsh and K.R. Stokes, Prog. Org. Coat., 77, 473 (2014); doi:10.1016/j.porgcoat.2013.11.013.
- E. Martinelli, M.K. Sarvothaman, G. Galli, M.E. Pettitt, M.E. Callow, J.A. Callow, S.L. Conlan, A.S. Clare, A.B. Sugiharto, C. Davies and D. Williams, Biofouling, 28, 571 (2012); doi:10.1080/08927014.2012.697897.
- M.M. Rahman, H.H. Chun and H. Park, J. Coat. Technol. Res., 8, 389 (2011); doi:10.1007/s11998-010-9307-9.
- C.J. Kavanagh, G.W. Swain, B.S. Kovach, J. Stein, C. Darkangelo-Wood, K. Truby, E. Holm, J. Montemarano, A. Meyer and D. Wiebe, Biofouling, 19, 381 (2003); doi:10.1080/08927010310001623296.
- F. Chen, F. Ye, G. Chu, J. Guo and L. Huo, Prog. Org. Coat., 67, 60 (2010); doi:10.1016/j.porgcoat.2009.09.014.
- M. Lejars, A. Margaillan and C. Bressy, Chem. Rev., 112, 4347 (2012); doi:10.1021/cr200350v.
References
D.M. Yebra, S. Kiil and K. Dam-Johansen, Prog. Org. Coat., 50, 75 (2004); doi:10.1016/j.porgcoat.2003.06.001.
Z. Xu and Y.Q. Ou, Corros. Sci. Prot. Technol., 24, 192 (2012).
R.F. Brady Jr., Prog. Org. Coat., 35, 31 (1999); doi:10.1016/S0300-9440(99)00005-3.
R.L. Townsin, Biofouling, 19 (Suppl. 1), 15 (2003); doi:10.1080/0892701031000088535.
L.D. Chambers, J.A. Wharton, R.J.K. Wood, F.C. Walsh and K.R. Stokes, Prog. Org. Coat., 77, 473 (2014); doi:10.1016/j.porgcoat.2013.11.013.
E. Martinelli, M.K. Sarvothaman, G. Galli, M.E. Pettitt, M.E. Callow, J.A. Callow, S.L. Conlan, A.S. Clare, A.B. Sugiharto, C. Davies and D. Williams, Biofouling, 28, 571 (2012); doi:10.1080/08927014.2012.697897.
M.M. Rahman, H.H. Chun and H. Park, J. Coat. Technol. Res., 8, 389 (2011); doi:10.1007/s11998-010-9307-9.
C.J. Kavanagh, G.W. Swain, B.S. Kovach, J. Stein, C. Darkangelo-Wood, K. Truby, E. Holm, J. Montemarano, A. Meyer and D. Wiebe, Biofouling, 19, 381 (2003); doi:10.1080/08927010310001623296.
F. Chen, F. Ye, G. Chu, J. Guo and L. Huo, Prog. Org. Coat., 67, 60 (2010); doi:10.1016/j.porgcoat.2009.09.014.
M. Lejars, A. Margaillan and C. Bressy, Chem. Rev., 112, 4347 (2012); doi:10.1021/cr200350v.