Issue

Vol. 26 No. 14 (2014): Vol 26 Issue 14

Copyright (c) 2014 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Effect of TiC and TiC/Ti(C,N) Interlayer on Structure and Corrosion Properties of TiN Coating on 316L Stainless Steel Substrate

https://doi.org/10.14233/ajchem.2014.16054
Jin Zhang
School of Materials Science and Engineering, Southwest Petroleum University, Chengdu 610500, P.R. China
Qi Xue
School of Materials Science and Engineering, Southwest Petroleum University, Chengdu 610500, P.R. China
Songxia Li
School of Materials Science and Engineering, Southwest Petroleum University, Chengdu 610500, P.R. China

Corresponding Author(s) : Qi Xue

jzhang@swpu.edu.cn

Asian Journal of Chemistry, Vol. 26 No. 14 (2014): Vol 26 Issue 14

Abstract

This paper focuses on the research of preparing TiN, TiC/TiN, TiC/Ti(C0.3,N0.7)/TiN films on 316L stainless steel substrates by the method of high temperature chemical vapor deposition. The phase structure, surface and cross section morphology of the deposited films have been analyzed and illustrated. Compared with TiN and TiC/TiN coating, the TiC/ Ti(C0.3,N0.7)/TiN coating exhibits enhanced adhesion between TiN coating and the substrates. Based on the corrosion measurement, it can be concluded that the coating samples exhibit better corrosion resistance in 20 % H2SO4 solution at room temperature. The TiC/ Ti(C0.3,N0.7)/TiN coating specially exhibits the best adhesion and corrosion resistance which is beneficial for the future application of 316L stainless steel.

Keywords

HTCVD Multilayer coatings 316L stainless steel Adhesion. Corrosion resistance Adhesion
Zhang, J., Xue, Q., & Li, S. (2014). Effect of TiC and TiC/Ti(C,N) Interlayer on Structure and Corrosion Properties of TiN Coating on 316L Stainless Steel Substrate. Asian Journal of Chemistry, 26(14), 4172–4176. https://doi.org/10.14233/ajchem.2014.16054
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. T. Hryniewicz, R. Rokicki and K. Rokosz, Surf. Coat. Technol., 202, 1668 (2008); doi:10.1016/j.surfcoat.2007.07.067.
  2. L. Chenglong, Y. Dazhi, L. Guoqiang and Q. Min, Mater. Lett., 59, 3813 (2005); doi:10.1016/j.matlet.2005.06.058.
  3. T. Hryniewicz, K. Rokosz and R. Rokicki, Corros. Sci., 50, 2676 (2008); doi:10.1016/j.corsci.2008.06.048.
  4. C.N. Chang and F.S. Chen, Mater. Chem. Phys., 82, 281 (2003); doi:10.1016/S0254-0584(03)00234-7.
  5. E.I. Meletis, C.A. Gibbs and K. Lian, Dent. Mater., 5, 411 (1989); doi:10.1016/0109-5641(89)90111-5.
  6. P.K. Ajikumar, M. Kamruddin, S. Kalavathi, A.K. Balamurugan, S. Kataria, P. Shankar and A.K. Tyagi, Ceram. Int., 38, 2253 (2012); doi:10.1016/j.ceramint.2011.10.075.
  7. M. Yasuoka, P.P. Wang and R.I. Murakami, Surf. Coat. Technol., 206, 2168 (2012); doi:10.1016/j.surfcoat.2011.09.053.
  8. L. Ipaz, J.C. Caicedo, J. Esteve, F.J. Espinoza-Beltran and G. Zambrano, Appl. Surf. Sci., 258, 3805 (2012); doi:10.1016/j.apsusc.2011.12.033.
  9. J. Smolik and K. Zdunek, Surf. Coat. Technol., 116-119, 398 (1999); doi:10.1016/S0257-8972(99)00219-4.
  10. L.F. Senna, C.A. Achete, T. Hirsch and F.L. Freire Jr., Surf. Coat. Technol., 94-95, 390 (1997); doi:10.1016/S0257-8972(97)00447-7.
  11. J.C. Caicedo, C. Amaya, G. Cabrera, J. Esteve, W. Aperador, M.E. Gomez and P. Prieto, Thin Solid Films, 519, 6362 (2011); doi:10.1016/j.tsf.2011.04.035.
  12. C.S. Ren, Z.X. Mu, Y.N. Wang and H. Yu, Surf. Coat. Technol., 185, 210 (2004); doi:10.1016/j.surfcoat.2003.12.030.
  13. D.M. Devia, E. Restrepo-Parra and P.J. Arango, Appl. Surf. Sci., 258, 1164 (2011); doi:10.1016/j.apsusc.2011.09.061.
  14. J.Y. Chen, G.P. Yu and J.H. Huang, Mater. Chem. Phys., 65, 310 (2000); doi:10.1016/S0254-0584(00)00255-8.
  15. S.K. Kim, T.H. Kim, J. Wöhle and K.-T. Rie, Surf. Coat. Technol., 131, 121 (2000); doi:10.1016/S0257-8972(00)00831-8.
  16. T. Miller, J.-M. Lin, L. Pirolli, L. Coquilleau, R. Luharuka and A.V. Teplyakov, Thin Solid Films, 522, 193 (2012); doi:10.1016/j.tsf.2012.08.012.
  17. J. Garcia, R. Pitonak, L. Agudo and A. Kostka, Mater. Lett., 68, 71 (2012); doi:10.1016/j.matlet.2011.10.008.
  18. L. Chenglong, Y. Dazhi, L. Guoqiang and Q. Min, Mater. Lett., 59, 3813 (2005); doi:10.1016/j.matlet.2005.06.058.
  19. M.C. Li, S.Z. Luo, C.L. Zeng, J. Shen, H. Lin and C. Cao, Corros. Sci., 46, 1369 (2004); doi:10.1016/S0010-938X(03)00187-2.
  20. R. Yigit, E. Celik, F. Findik and S. Koksal, Int. J. Refract. Met. Hard Mater., 26, 514 (2008); doi:10.1016/j.ijrmhm.2007.12.003.
  21. I. Lhermitte-Sebire, R. Colmet, R. Naslain, J. Desmaison and G. Gladel, Thin Solid Films, 138, 221 (1986); doi:10.1016/0040-6090(86)90395-0.
  22. Y.H. Zhao, G.Q. Lin, J.Q. Xiao, C. Dong and L.S. Wen, Vacuum, 85, 1 (2010); doi:10.1016/j.vacuum.2009.04.043.
  23. H. Jensen, U.M. Jensen and G. Sorensen, Surf. Coat. Technol., 74-75, 297 (1995); doi:10.1016/0257-8972(95)08358-8.
  24. C. Subramanian and K.N. Strafford, Wear, 165, 85 (1993); doi:10.1016/0043-1648(93)90376-W.
  25. L. Ipaz, J.C. Caicedo, J. Esteve, F.J. Espinoza-Beltran and G. Zambrano, Appl. Surf. Sci., 258, 3805 (2012); doi:10.1016/j.apsusc.2011.12.033.
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 0 Download : 0