Copyright (c) 2014 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Physical Performance of Sisal-PALF-Banana/Glass Fiber Reinforced Polyester Hybrid Composites
Corresponding Author(s) : P.S. Raghavan
Asian Journal of Chemistry,
Vol. 26 No. 14 (2014): Vol 26 Issue 14
Abstract
The natural fibers are used as an alternate substitute for glass fiber reinforced polymer composite materials because of its availability and low cost. The present study investigates the mechanical properties of sisal-PALF-banana-glass fiber reinforced with polyester hybrid composites. The results indicated that there will be a vast increase in the superior properties like tensile strength, flexural strength and impact strength of sisal-PALF-banana fiber when it is reinforced with glass fiber in the polyester matrix composites. The interfacial properties are analyzed by scanning electron microscope.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- C. Baley, F. Busnel, Y. Grohens and O. Sire, Composites: Part A, 37, 1626 (2006); doi:10.1016/j.compositesa.2005.10.014.
- M.A. Sawpan, K.L. Pickering and A. Fernyhough, Int. J. Mater. Prod. Technol., 36, 229 (2009); doi:10.1504/IJMPT.2009.027834.
- C. Baley, J. Mater. Sci., 39, 331 (2004); doi:10.1023/B:JMSC.0000007768.63055.ae.
- M.A. Sawpan, K.L. Pickering and A. Fernyhough, Composites: Part A, 43, 519 (2012); doi:10.1016/j.compositesa.2011.11.021.
- A.N. Benitez, M.D. Monzon, I. Angulo, Z. Ortega, P.M. Hernandez and M.D. Marrero, Measurement, 46, 1065 (2013); doi:10.1016/j.measurement.2012.11.021.
- L.A. Pothan and S. Thomas, Compos. Sci. Technol., 63, 1231 (2003); doi:10.1016/S0266-3538(03)00092-7.
- L.A. Pothan, S. Thomas and G. Groeninckx, Composites: Part A, 37, 1260 (2006); doi:10.1016/j.compositesa.2005.09.001.
- Y. Li, Y.-W. Mai and L. Ye, Compos. Sci. Technol., 60, 2037 (2000); doi:10.1016/S0266-3538(00)00101-9.
- K. Joseph, S. Thomas and C. Pavithran, Polymer, 37, 5139 (1996); doi:10.1016/0032-3861(96)00144-9.
- A.R. Sanadi, S.V. Prasad and P.K. Rohatgi, J. Mater. Sci., 21, 4299 (1986); doi:10.1007/BF01106545.
- M.Z. Rong, R.K.Y. Li, C.N. Ng, S.C. Tjong, Y.-W. Mai and H.M. Zeng, Effect of Fiber Pretreatment on the Impact Fracture Toughness of Sisal Fiber Reinforced Polymer Composites, In Proc. First Asian–Australian Conference on Composite Materials (ACCM-1), p. 433-1-4 (1998).
- M.Z. Rong, R.K.Y. Li, C.N. Ng, S.C. Tjong, Y.-W. Mai and H.M. Zeng, Effect of Water Absorption on the Impact Behavior of Short Sisal Fiber Reinforced Polymer Composites, In Proc. First Asian–Australian Conference on Composite Materials (ACCM-1), p. 438-1-4 (1998).
- E.T.N. Bisanda and M.P. Ansell, Compos. Sci. Technol., 41, 165 (1991); doi:10.1016/0266-3538(91)90026-L.
- Q.H. Mu, C. Wei and S.Y. Feng, Polym. Compos., 30, 131 (2009); doi:10.1002/pc.20529.
- J.E. Gordon, G. Jeronimidis and M.O.W. Richardson, Philosophical Trans. Royal Society of London, Series A: Math. Phys. Sci., 294, 545 (1980); doi:10.1098/rsta.1980.0063.
- G.C. Yang, H.M. Zeng, J. Jli, N. Bjian and W. Bzhang, Acta Sci. Natur. Univ. Sunyatseni, 35, 53 (1996).
References
C. Baley, F. Busnel, Y. Grohens and O. Sire, Composites: Part A, 37, 1626 (2006); doi:10.1016/j.compositesa.2005.10.014.
M.A. Sawpan, K.L. Pickering and A. Fernyhough, Int. J. Mater. Prod. Technol., 36, 229 (2009); doi:10.1504/IJMPT.2009.027834.
C. Baley, J. Mater. Sci., 39, 331 (2004); doi:10.1023/B:JMSC.0000007768.63055.ae.
M.A. Sawpan, K.L. Pickering and A. Fernyhough, Composites: Part A, 43, 519 (2012); doi:10.1016/j.compositesa.2011.11.021.
A.N. Benitez, M.D. Monzon, I. Angulo, Z. Ortega, P.M. Hernandez and M.D. Marrero, Measurement, 46, 1065 (2013); doi:10.1016/j.measurement.2012.11.021.
L.A. Pothan and S. Thomas, Compos. Sci. Technol., 63, 1231 (2003); doi:10.1016/S0266-3538(03)00092-7.
L.A. Pothan, S. Thomas and G. Groeninckx, Composites: Part A, 37, 1260 (2006); doi:10.1016/j.compositesa.2005.09.001.
Y. Li, Y.-W. Mai and L. Ye, Compos. Sci. Technol., 60, 2037 (2000); doi:10.1016/S0266-3538(00)00101-9.
K. Joseph, S. Thomas and C. Pavithran, Polymer, 37, 5139 (1996); doi:10.1016/0032-3861(96)00144-9.
A.R. Sanadi, S.V. Prasad and P.K. Rohatgi, J. Mater. Sci., 21, 4299 (1986); doi:10.1007/BF01106545.
M.Z. Rong, R.K.Y. Li, C.N. Ng, S.C. Tjong, Y.-W. Mai and H.M. Zeng, Effect of Fiber Pretreatment on the Impact Fracture Toughness of Sisal Fiber Reinforced Polymer Composites, In Proc. First Asian–Australian Conference on Composite Materials (ACCM-1), p. 433-1-4 (1998).
M.Z. Rong, R.K.Y. Li, C.N. Ng, S.C. Tjong, Y.-W. Mai and H.M. Zeng, Effect of Water Absorption on the Impact Behavior of Short Sisal Fiber Reinforced Polymer Composites, In Proc. First Asian–Australian Conference on Composite Materials (ACCM-1), p. 438-1-4 (1998).
E.T.N. Bisanda and M.P. Ansell, Compos. Sci. Technol., 41, 165 (1991); doi:10.1016/0266-3538(91)90026-L.
Q.H. Mu, C. Wei and S.Y. Feng, Polym. Compos., 30, 131 (2009); doi:10.1002/pc.20529.
J.E. Gordon, G. Jeronimidis and M.O.W. Richardson, Philosophical Trans. Royal Society of London, Series A: Math. Phys. Sci., 294, 545 (1980); doi:10.1098/rsta.1980.0063.
G.C. Yang, H.M. Zeng, J. Jli, N. Bjian and W. Bzhang, Acta Sci. Natur. Univ. Sunyatseni, 35, 53 (1996).