Simultaneous Removal of Dyes Colour and Cu(II) Metal Ions using Acetone-Formaldehyde-Salicyclic Acid Resin

Vihar Patel; Akshit A. Patel; Bharat Dixit; Ritu Dixit

doi:10.14233/ajchem.2019.22116

Issue

Vol. 31 No. 10 (2019): Vol 31 Issue 10

Issue Published : August 30, 2019

This work is licensed under a Creative Commons Attribution 4.0 International License.

Simultaneous Removal of Dyes Colour and Cu(II) Metal Ions using Acetone-Formaldehyde-Salicyclic Acid Resin

https://doi.org/10.14233/ajchem.2019.22116

Vihar Patel

Department of Pharmaceutical Chemistry, Ashok & Rita Patel Institute of Integrated Study & Research in Biotechnology and Allied Sciences, (Affiliated to Sardar Patel University), New Vallabh Vidyanagar-388120, India

Akshit A. Patel

Bharat Dixit

Department of Chemistry, V. P. & R. P. T. P. Science College (Affiliated to Sardar Patel University), Vallabh Vidyanagar-388120, India

Ritu Dixit

https://orcid.org/0000-0003-1190-8797

Corresponding Author(s) : Ritu Dixit

ritsdixit@yahoo.co.in

Asian Journal of Chemistry, Vol. 31 No. 10 (2019): Vol 31 Issue 10
Article Published : August 30, 2019

Abstract

Removal of dyes colour and Cu(II) metal ion from aqueous solution using acetone-formaldehyde-salicyclic acid (AFSA) resin has been carried out. The results revealed that AFSA resin acts as a cheap substitute to commercial adsorbent like activated carbons. The effects of pH, adsorbent dose, contact time, and initial dye and Cu(II) metal ion concentration on the adsorption efficiencies were investigated. Isotherm studies were conducted using Langmuir and Freundlich models, and thermodynamic studies were also performed. Adsorption of dyes was found to obey the Langmuir isotherm model and have endothermic process. The maximum adsorption capacities calculated from the Langmuir isotherm were found to be 88.18 and 2.9 mg/g for methyl orange dyes.

Keywords

Methyl orange dye Adsorbent Acetone-formaldehyde-salicyclic acid resin

Patel, V., Patel, A. A., Dixit, B., & Dixit, R. (2019). Simultaneous Removal of Dyes Colour and Cu(II) Metal Ions using Acetone-Formaldehyde-Salicyclic Acid Resin. Asian Journal of Chemistry, 31(10), 2240–2244. https://doi.org/10.14233/ajchem.2019.22116

Download Citation

References

A.R. Lang, Dyes and Pigments: New Research, Nova Science Publishers, Inc.; UK (2013).
M. Yusuf, M. Shabbir and F. Mohammad, Nat. Prod. Bioprospect., 7, 123 (2017). https://doi.org/10.1007/s13659-017-0119-9.
M. Joshi, R. Bansal and R. Purwar, Indian J. Fibre Text. Res., 29, 239 (2004).
M. Malakootian and A. Fatehizadeh, Iran. J. Environ. Health. Sci. Eng., 7, 267 (2010).
C.W. Young, R.B. DuVall and N. Wright, Anal. Chem., 23, 709 (1951); https://doi.org/10.1021/ac60053a007.
R.M. Osman and S. Al-Masry, Int. J. Adv. Sci. Technol. Res., 4, (2014).
H.S. Patel and B.C. Dixit, High Perform. Polym., 9, 153 (1997); https://doi.org/10.1088/0954-0083/9/2/007.
D.K. Rath, S. Lenka and P.I. Nayak, J. Appl. Polym. Sci., 46, 2109 (1992); https://doi.org/10.1002/app.1992.070461206.
D.T. Masram and K.P. Kariya, Der Pharma Chemica, 6, 292 (2014).
S.D. Alexandratos, A.W. Trochimczuk, E.P. Horwitz and R.C. Gatrone, J. Appl. Polym. Sci., 61, 273 (1996); https://doi.org/10.1002/(SICI)1097-4628(19960711)61:2<273::AIDAPP9>3.0.CO;2-M.
K. Singh, D.H. Lataye and K.L. Wasewar, J. Hazard. Toxic Radioact. Waste, 20, 04015024 (2016); https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000309.
A.M.E. Sulieman, A. Wahid, M. Yousif and A.M. Mustafa, Fourteenth International Water Technology Conference, IWTC-14 2010, Cairo, Egypt, pp 305-315 (2010).
R.S. Lokhande, P.U. Singare and D.S. Pimple, Int. J. Ecol., 1, 1 (2010).
S.O. Eze, J.C. Igwe and D. Dipo, Int. J. Biol. Chem. Sci., 7, 852 (2013).
H.S. Patel and B.C. Dixit, Int. J. Polym. Mater., 42, 309 (1998); https://doi.org/10.1080/00914039808033878.
H.S. Patel and B.C. Dixit, Int. J. Polym. Mater., 40, 29 (1998); https://doi.org/10.1080/00914039808050140.

References

A.R. Lang, Dyes and Pigments: New Research, Nova Science Publishers, Inc.; UK (2013).

M. Yusuf, M. Shabbir and F. Mohammad, Nat. Prod. Bioprospect., 7, 123 (2017). https://doi.org/10.1007/s13659-017-0119-9.

M. Joshi, R. Bansal and R. Purwar, Indian J. Fibre Text. Res., 29, 239 (2004).

M. Malakootian and A. Fatehizadeh, Iran. J. Environ. Health. Sci. Eng., 7, 267 (2010).

C.W. Young, R.B. DuVall and N. Wright, Anal. Chem., 23, 709 (1951); https://doi.org/10.1021/ac60053a007.

R.M. Osman and S. Al-Masry, Int. J. Adv. Sci. Technol. Res., 4, (2014).

H.S. Patel and B.C. Dixit, High Perform. Polym., 9, 153 (1997); https://doi.org/10.1088/0954-0083/9/2/007.

D.K. Rath, S. Lenka and P.I. Nayak, J. Appl. Polym. Sci., 46, 2109 (1992); https://doi.org/10.1002/app.1992.070461206.

D.T. Masram and K.P. Kariya, Der Pharma Chemica, 6, 292 (2014).

S.D. Alexandratos, A.W. Trochimczuk, E.P. Horwitz and R.C. Gatrone, J. Appl. Polym. Sci., 61, 273 (1996); https://doi.org/10.1002/(SICI)1097-4628(19960711)61:2<273::AIDAPP9>3.0.CO;2-M.

K. Singh, D.H. Lataye and K.L. Wasewar, J. Hazard. Toxic Radioact. Waste, 20, 04015024 (2016); https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000309.

A.M.E. Sulieman, A. Wahid, M. Yousif and A.M. Mustafa, Fourteenth International Water Technology Conference, IWTC-14 2010, Cairo, Egypt, pp 305-315 (2010).

R.S. Lokhande, P.U. Singare and D.S. Pimple, Int. J. Ecol., 1, 1 (2010).

S.O. Eze, J.C. Igwe and D. Dipo, Int. J. Biol. Chem. Sci., 7, 852 (2013).

H.S. Patel and B.C. Dixit, Int. J. Polym. Mater., 42, 309 (1998); https://doi.org/10.1080/00914039808033878.

H.S. Patel and B.C. Dixit, Int. J. Polym. Mater., 40, 29 (1998); https://doi.org/10.1080/00914039808050140.

Issue

Vol. 31 No. 10 (2019): Vol 31 Issue 10

Simultaneous Removal of Dyes Colour and Cu(II) Metal Ions using Acetone-Formaldehyde-Salicyclic Acid Resin

Corresponding Author(s) : Ritu Dixit

Abstract

Keywords

Full Article

Download Citation

References

Table Of Contents