Copyright (c) 2026 Khuraman Efendiyeva, Vagif Farzaliyev, Ayaz Mammadov, Vali Kyazimov

This work is licensed under a Creative Commons Attribution 4.0 International License.
Synthesis and Characterization of New Derivatives of Trithiocarbonic Acids as Additives for Lubricating Oils
Corresponding Author(s) : Khuraman Efendiyeva
Asian Journal of Chemistry,
Vol. 38 No. 11 (2026): Vol 38 Issue 11 (2026)
Abstract
The development of effective lubricant additives is essential for reducing friction and wear under demanding operating conditions. In this study, a series of sulphur-rich trithiocarbonate derivatives containing hydroxyl, ether, and chlorine functionalities was synthesized using epichlorohydrin-derived intermediates. The structures of the synthesized compounds were characterized by IR, 1H NMR and 13C NMR spectroscopy. Their tribological performance was evaluated in MC-20 transmission oil using a four-ball friction tester. The results revealed differences in lubrication performance depending on the functional groups present in the molecular structure. The hydroxyl- derivative exhibited the highest effectiveness, followed by the allyloxymethoxy- and butoxymethoxy derivatives. The improved performance of the hydroxyl containing compound may be attributed to stronger interactions with the metal surface, which can promote additive adsorption and protective boundary-film formation. The findings suggest that functional group composition plays an important role in governing the tribological behaviour of trithiocarbonate-based additives.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- S. Ardah, F.J. Profito and D. Dini, Adv. Colloid Interface Sci., 342, 103492 (2025); https://doi.org/10.1016/j.cis.2025.103492
- W. Wang and J. Qu, Friction, 13, 9440988 (2025); https://doi.org/10.26599/FRICT.2025.9440988
- X. Lyu, P. Xu, Y. Wang, W. Bao, C. Ge, X. Ma, Q. Yong, Y. Wang, Q. You and K. Xie, Ind. Lubr. Tribol., 78, 509 (2025); https://doi.org/10.1108/ILT-12-2024-0496
- A.E. Tsai and K. Komvopoulos, Materials, 17, 2324 (2024); https://doi.org/10.3390/ma17102324
- V. Farzaliyev, A. Shuriberko, A. Sujayev, S. Osmanova, S. Gojayeva and K. Gahramanova, J. Mol. Struct., 1221, 128844 (2020); https://doi.org/10.1016/j.molstruc.2020.128844
- S.F. Osmanova, S.A. Sardarova and F.A. Mamedov, Chem. Probl., 15, 383 (2017); https://doi.org/10.32737/2221-8688-2017-4-383-386
- A.K. Mammadova, K.G. Efendiyeva and I.P. Ismayilov, World Oil Prod. Mag., 7, 8 (2023); https://doi.org/10.32758/2782-3040-2023-0-7-8-12
- M.E. Loginova, G.Yu. Karimov and E.M. Movsumzade, News Univ. Chem. Chem. Technol., 67, 89 (2024); https://doi.org/10.6060/ivkkt.20246701.6821
- E.R. Babaev, Petrol. Chem., 46, 206 (2006); https://doi.org/10.1134/S0965544106030133
- T. Akchurina, S. Sardarova, K. Efendiyeva, I. Eyvazova, V. Farzaliyev and A. Sujayev, Appl. Petrochem. Res., 11, 327 (2021); https://doi.org/10.1007/s13203-021-00281-z
- K. Komvopoulos, V. Do, E.S. Yamaguchi, S.W. Yeh and P.R. Ryason, Tribol. Trans., 47, 321 (2004); https://doi.org/10.1080/05698190490455546
- Q. Xue and W. Liu, Lubr. Sci., 7, 81 (1994); https://doi.org/10.1002/ls.3010070107
- K.G. Afandiyeva, A.K. Mammadova, A.N. Humbatzadeh, M.T. Abbasova and B.M. Aminova, World Oil Prod. Mag., 2, 46 (2023); https://doi.org/10.32758/2782-3040-2023-0-2-46-51
- V.M. Farzaliyev, N.P. Mustafayev, K.G. Efendiyeva and M.T. Abbasova, Russ. J. Org. Chem., 56, 811 (2020); https://doi.org/10.31857/S0514749220050201
- J. Soni and N.N. Gosvami, Langmuir, 40, 3301 (2024); https://doi.org/10.1021/acs.langmuir.3c02512
- E.R. Babayev, K.G. Efendiyeva, P.S. Mammadova, O.Y. Poletayeva, I.Z. Mukhametzyanov and K.Z. Behbudova, World Oil Prod. Mag., 3, 32 (2021); https://doi.org/10.32758/2071-5951-2021-0-3-32-34
- A.G. Papay, Lubr. Sci., 10, 209 (1998); https://doi.org/10.1002/ls.3010100304
- K.K. Efendiyeva, V.M. Farzaliyev, A.A. Mammadov, A.K. Mammadova, I.P. Ismayilov, M. A.Mirzoyeva and S.S. Efendiyeva, J. Petrochem. Oil Refin. Process., 26, 1185 (2025); https://doi.org/10.62972/1726-4685.2025.4.1185
- D. Wei, X. Han and R. Wang, Lubr. Sci., 2, 63 (1989); https://doi.org/10.1002/ls.3010020105
- F. Wang, F. Huang, S. Han and W. Zhang, Polym. Chem., 16, 3661 (2025); https://doi.org/10.1039/D5PY00406C
- B.K. Krimble and C.R. Bresson, Process for Producing Trithiocarbonic Acid Esters, US Patent 4528141 (1985).
- B. Zeynalov, T.N. Kyazimova and S.K. Sharifova, Epichlorohydrin, Baku, p. 36 (2000).
- K.G. Efendiyeva, V.M. Farzaliyev, N.P. Mustafayev, M.R. Safarova and T.C. Jafarova, 1-Bromo-3-chloro-2-butoxymethoxypropane as a Synthon in the Production of 1-Thiocyanato-3-chloro-2-butoxymethoxy-propane, AZ Patent I2022 0099 (2022).
- V.M. Farzaliyev, K.G. Efendiyeva, V.M. Kazimov and M.T. Abbasova, AZ Patent I2025 0124 (2025).
- K.G. Efendiyeva, V.M. Farzaliyev, A.K. Mammadova, V.M. Kazimov, M.H. Abbasov and K.M. Mammadova, AZ Patent I2025 0126 (2025).
- K.G. Efendiyeva, A.R. Sujayev, V.M. Kazimov and I.P. Ismaylov, AZ Patent I2024 0103 (2024).
- L. Bellamy, The Infra-red Spectra of Complex Molecules, Chapman and Hall, London, edn 3 (1975).
- M. Przedlacki and C. Kajdas, Tribol. Trans., 49, 202 (2006); https://doi.org/10.1080/05698190500544676
- A.J. Barthel, D.R. Combs and S.H. Kim, RSC Adv., 4, 26081 (2014); https://doi.org/10.1039/C4RA02283A
- R. Lu, M. Morimoto, H. Tani, N. Tagawa and S. Koganezawa, Lubricants, 7, 112 (2019); https://doi.org/10.3390/lubricants7120112
- A.M. Kuliyev, Chemistry and Technology of Additives for Oils and Fuels, Khimiya, pp. 102-118, 136 (1985).
- P.V. Kotvis and W.T. Tysoe, Appl. Surf. Sci., 40, 213 (1989); https://doi.org/10.1016/0169-4332(89)90005-6
References
S. Ardah, F.J. Profito and D. Dini, Adv. Colloid Interface Sci., 342, 103492 (2025); https://doi.org/10.1016/j.cis.2025.103492
W. Wang and J. Qu, Friction, 13, 9440988 (2025); https://doi.org/10.26599/FRICT.2025.9440988
X. Lyu, P. Xu, Y. Wang, W. Bao, C. Ge, X. Ma, Q. Yong, Y. Wang, Q. You and K. Xie, Ind. Lubr. Tribol., 78, 509 (2025); https://doi.org/10.1108/ILT-12-2024-0496
A.E. Tsai and K. Komvopoulos, Materials, 17, 2324 (2024); https://doi.org/10.3390/ma17102324
V. Farzaliyev, A. Shuriberko, A. Sujayev, S. Osmanova, S. Gojayeva and K. Gahramanova, J. Mol. Struct., 1221, 128844 (2020); https://doi.org/10.1016/j.molstruc.2020.128844
S.F. Osmanova, S.A. Sardarova and F.A. Mamedov, Chem. Probl., 15, 383 (2017); https://doi.org/10.32737/2221-8688-2017-4-383-386
A.K. Mammadova, K.G. Efendiyeva and I.P. Ismayilov, World Oil Prod. Mag., 7, 8 (2023); https://doi.org/10.32758/2782-3040-2023-0-7-8-12
M.E. Loginova, G.Yu. Karimov and E.M. Movsumzade, News Univ. Chem. Chem. Technol., 67, 89 (2024); https://doi.org/10.6060/ivkkt.20246701.6821
E.R. Babaev, Petrol. Chem., 46, 206 (2006); https://doi.org/10.1134/S0965544106030133
T. Akchurina, S. Sardarova, K. Efendiyeva, I. Eyvazova, V. Farzaliyev and A. Sujayev, Appl. Petrochem. Res., 11, 327 (2021); https://doi.org/10.1007/s13203-021-00281-z
K. Komvopoulos, V. Do, E.S. Yamaguchi, S.W. Yeh and P.R. Ryason, Tribol. Trans., 47, 321 (2004); https://doi.org/10.1080/05698190490455546
Q. Xue and W. Liu, Lubr. Sci., 7, 81 (1994); https://doi.org/10.1002/ls.3010070107
K.G. Afandiyeva, A.K. Mammadova, A.N. Humbatzadeh, M.T. Abbasova and B.M. Aminova, World Oil Prod. Mag., 2, 46 (2023); https://doi.org/10.32758/2782-3040-2023-0-2-46-51
V.M. Farzaliyev, N.P. Mustafayev, K.G. Efendiyeva and M.T. Abbasova, Russ. J. Org. Chem., 56, 811 (2020); https://doi.org/10.31857/S0514749220050201
J. Soni and N.N. Gosvami, Langmuir, 40, 3301 (2024); https://doi.org/10.1021/acs.langmuir.3c02512
E.R. Babayev, K.G. Efendiyeva, P.S. Mammadova, O.Y. Poletayeva, I.Z. Mukhametzyanov and K.Z. Behbudova, World Oil Prod. Mag., 3, 32 (2021); https://doi.org/10.32758/2071-5951-2021-0-3-32-34
A.G. Papay, Lubr. Sci., 10, 209 (1998); https://doi.org/10.1002/ls.3010100304
K.K. Efendiyeva, V.M. Farzaliyev, A.A. Mammadov, A.K. Mammadova, I.P. Ismayilov, M. A.Mirzoyeva and S.S. Efendiyeva, J. Petrochem. Oil Refin. Process., 26, 1185 (2025); https://doi.org/10.62972/1726-4685.2025.4.1185
D. Wei, X. Han and R. Wang, Lubr. Sci., 2, 63 (1989); https://doi.org/10.1002/ls.3010020105
F. Wang, F. Huang, S. Han and W. Zhang, Polym. Chem., 16, 3661 (2025); https://doi.org/10.1039/D5PY00406C
B.K. Krimble and C.R. Bresson, Process for Producing Trithiocarbonic Acid Esters, US Patent 4528141 (1985).
B. Zeynalov, T.N. Kyazimova and S.K. Sharifova, Epichlorohydrin, Baku, p. 36 (2000).
K.G. Efendiyeva, V.M. Farzaliyev, N.P. Mustafayev, M.R. Safarova and T.C. Jafarova, 1-Bromo-3-chloro-2-butoxymethoxypropane as a Synthon in the Production of 1-Thiocyanato-3-chloro-2-butoxymethoxy-propane, AZ Patent I2022 0099 (2022).
V.M. Farzaliyev, K.G. Efendiyeva, V.M. Kazimov and M.T. Abbasova, AZ Patent I2025 0124 (2025).
K.G. Efendiyeva, V.M. Farzaliyev, A.K. Mammadova, V.M. Kazimov, M.H. Abbasov and K.M. Mammadova, AZ Patent I2025 0126 (2025).
K.G. Efendiyeva, A.R. Sujayev, V.M. Kazimov and I.P. Ismaylov, AZ Patent I2024 0103 (2024).
L. Bellamy, The Infra-red Spectra of Complex Molecules, Chapman and Hall, London, edn 3 (1975).
M. Przedlacki and C. Kajdas, Tribol. Trans., 49, 202 (2006); https://doi.org/10.1080/05698190500544676
A.J. Barthel, D.R. Combs and S.H. Kim, RSC Adv., 4, 26081 (2014); https://doi.org/10.1039/C4RA02283A
R. Lu, M. Morimoto, H. Tani, N. Tagawa and S. Koganezawa, Lubricants, 7, 112 (2019); https://doi.org/10.3390/lubricants7120112
A.M. Kuliyev, Chemistry and Technology of Additives for Oils and Fuels, Khimiya, pp. 102-118, 136 (1985).
P.V. Kotvis and W.T. Tysoe, Appl. Surf. Sci., 40, 213 (1989); https://doi.org/10.1016/0169-4332(89)90005-6