Copyright (c) 2026 Kanchan Rani, J.B. Dahiya

This work is licensed under a Creative Commons Attribution 4.0 International License.
Effect of Crosslinking in Phosphorus-Nitrogen based Hydrogel on the Flammability of Cotton Fabric
Corresponding Author(s) : J.B. Dahiya
Asian Journal of Chemistry,
Vol. 38 No. 11 (2026): Vol 38 Issue 11 (2026)
Abstract
To improve the flame retardancy of cotton fabrics for applications requiring enhanced fire safety, a phosphorus- and nitrogen-containing crosslinked hydrogel, poly(N-hydroxymethyl acrylamide)-bis[2-(methacryloyloxy)ethyl]phosphate (PNBP), was synthesized and evaluated as a flame-retardant coating. The hydrogel was characterized by FTIR spectroscopy, mass spectrometry and thermogravimetric analysis. Cotton fabrics were coated using the admicellar polymerization technique, with cetylpyridinium chloride as the cationic surfactant and 2,2'-azobis(2-methylpropionamidine) dihydrochloride as the initiator. The concentration of bis[2-(methacryloyloxy)ethyl]phosphate crosslinker was varied to investigate its effect on flame-retardant performance. The fabric treated with the formulation containing 50% crosslinker did not ignite under the specified auto-flammability test conditions and exhibited a limiting oxygen index (LOI) of 36.0%. The results showed an improvement in flame-retardant performance with increasing crosslinker content under the conditions investigated. Field-emission scanning electron microscopy (FESEM) was used to examine the surface morphology of the treated fabrics.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- D. Wang, L. Zhong, C. Zhang, F. Zhang and G. Zhang, Cellulose, 25, 5479 (2018); https://doi.org/10.1007/s10570-018-1964-3
- J.B. Dahiya, N. Kumar and H. Bockhorn, Fire Mater., 38, 1 (2014); https://doi.org/10.1002/fam.2151
- C. Ling, L. Guo and Z. Wang, Ind. Crops Prod., 194, 116264 (2023); https://doi.org/10.1016/j.indcrop.2023.116264
- A. El-Shafei, M. ElShemy and A. Abou-Okeil, Carbohydr. Polym., 118, 83 (2015); https://doi.org/10.1016/j.carbpol.2014.11.007
- S. Nehra, S. Hanumansetty, E.A. O’Rear and J.B. Dahiya, Polym. Degrad. Stabil., 109, 137 (2014); https://doi.org/10.1016/j.polymdegradstab.2014.07.002
- Shubha and J.B. Dahiya, Indian J. Fibre Text. Res., 43, 457 (2018).
- P. Li, B. Wang, Y.J. Xu, Z. Jiang, C. Dong, Y. Liu and P. Zhu, ACS Sustain. Chem.& Eng., 7, 19246 (2019); https://doi.org/10.1021/acssuschemeng.9b05523
- L. Sun, H. Wang, W. Li, J. Zhang, Z. Zhang, Z. Lu, P. Zhu and C. Dong, Cellulose, 28, 3789 (2021); https://doi.org/10.1007/s10570-020-03632-6
- M. Kanat and T. Eren, J. Appl. Polym. Sci., 136, 47935 (2019); https://doi.org/10.1002/app.47935
- C. Zhang, Y. Jiang, S. Li, Z. Huang, X.Q. Zhan, N. Ma and F.C. Tsai, Heliyon, 8, e11225 (2022); https://doi.org/10.1016/j.heliyon.2022.e11225
- M. Barbalini, M. Bartoli, A. Tagliaferro and G. Malucelli, Polymers, 12, 811 (2020); https://doi.org/10.3390/polym12040811
- S. Li, X. Lin, Y. Liu, R. Li, X. Ren and T.S. Huang, Cellulose, 26, 4213 (2019); https://doi.org/10.1007/s10570-019-02373-5
- F. Fang, X. Chen, X. Zhang, C. Cheng, D. Xiao, Y. Meng, X. Ding, H. Zhang and X. Tian, Prog. Org. Coat., 90, 258 (2016); https://doi.org/10.1016/j.porgcoat.2015.09.025
- H.H. Kim, M.J. Sim, J.C. Lee and S.H. Cha, J. Mater. Sci., 58, 6850 (2023); https://doi.org/10.1007/s10853-023-08414-6
- P. He, X. Chen, P. Zhu, J. Liu, G. Fan, J. Sui, Z. Lu and C. Dong, J. Therm. Anal. Calorim., 132, 1771 (2018); https://doi.org/10.1007/s10973-018-7057-6
- J. Liu, C. Dong, Z. Zhang, H. Sun, D. Kong and Z. Lu, Cellulose, 27, 9027 (2020); https://doi.org/10.1007/s10570-020-03370-9
- B. Wang, Y.J. Xu, P. Li, F.Q. Zhang, Y. Liu and P. Zhu, Appl. Surf. Sci., 509, 145323 (2020); https://doi.org/10.1016/j.apsusc.2020.145323
- D. Kong, J. Liu, Z. Zhang, S. Wang and Z. Lu, Cellulose, 28, 8115 (2021); https://doi.org/10.1007/s10570-021-04019-x
- A. Aksit, N. Onar, B. Kutlu, E. Sergin and I. Yakin, Int. J. Cloth. Sci. Technol., 28, 319 (2016); https://doi.org/10.1108/IJCST-03-2016-0029
- S. Nehra and J.B. Dahiya, Fibers Polym., 15, 2495 (2014); https://doi.org/10.1007/s12221-014-2495-7
- W. Wang, J. Guo, X. Liu, H. Li, J. Sun, X. Gu, J. Wang, S. Zhang and W. Li, Cellulose, 27, 5377 (2020); https://doi.org/10.1007/s10570-020-03140-7
- K. Liu, Y. Lu, Y. Cheng, J. Li, G. Zhang and F. Zhang, Cellulose, 31, 3243 (2024); https://doi.org/10.1007/s10570-024-05785-0
- Y. Ma, Y. Wang, L. Ma and Z. Zhu, Cellulose, 30, 11829 (2023); https://doi.org/10.1007/s10570-023-05586-x
- P. Cheah, C.N. Bhikha, J.H. O’Haver and A.E. Smith, Int. J. Polym. Sci., 2017, 6308603 (2017); https://doi.org/10.1155/2017/6308603
- P. Arora, S.P. Singh and V. Arora, Int. J. Biotech Trends Technol., 5, 1 (2015); https://doi.org/10.14445/22490183/IJBTT-V9P601
- D.V. Le, M.M. Kendrick and E.A. O’Rear, Langmuir, 20, 7802 (2004); https://doi.org/10.1021/la049898m
- H.J. Barraza, Y.K. Hamidi, L. Aktas, E.A. O’Rear and M.C. Altan, Compos. Interfaces, 24, 125 (2017); https://doi.org/10.1080/09276440.2016.1193345
- R. Nazir and S. Gaan, J. Appl. Polym. Sci., 137, 47910 (2020); https://doi.org/10.1002/app.47910
- A. Saeed, D.M.R. Georget and A.G. Mayes, React. Funct. Polym., 70, 230 (2010); https://doi.org/10.1016/j.reactfunctpolym.2009.12.004
- M.T. Nakhjiri, G. Bagheri Marandi and M. Kurdtabar, J. Polym. Res., 25, 244 (2018); https://doi.org/10.1007/s10965-018-1625-0
- K. Rani and J.B. Dahiya, Rasayan J. Chem., 19, 1 (2026); https://doi.org/10.31788/RJC.2026.1919443
References
D. Wang, L. Zhong, C. Zhang, F. Zhang and G. Zhang, Cellulose, 25, 5479 (2018); https://doi.org/10.1007/s10570-018-1964-3
J.B. Dahiya, N. Kumar and H. Bockhorn, Fire Mater., 38, 1 (2014); https://doi.org/10.1002/fam.2151
C. Ling, L. Guo and Z. Wang, Ind. Crops Prod., 194, 116264 (2023); https://doi.org/10.1016/j.indcrop.2023.116264
A. El-Shafei, M. ElShemy and A. Abou-Okeil, Carbohydr. Polym., 118, 83 (2015); https://doi.org/10.1016/j.carbpol.2014.11.007
S. Nehra, S. Hanumansetty, E.A. O’Rear and J.B. Dahiya, Polym. Degrad. Stabil., 109, 137 (2014); https://doi.org/10.1016/j.polymdegradstab.2014.07.002
Shubha and J.B. Dahiya, Indian J. Fibre Text. Res., 43, 457 (2018).
P. Li, B. Wang, Y.J. Xu, Z. Jiang, C. Dong, Y. Liu and P. Zhu, ACS Sustain. Chem.& Eng., 7, 19246 (2019); https://doi.org/10.1021/acssuschemeng.9b05523
L. Sun, H. Wang, W. Li, J. Zhang, Z. Zhang, Z. Lu, P. Zhu and C. Dong, Cellulose, 28, 3789 (2021); https://doi.org/10.1007/s10570-020-03632-6
M. Kanat and T. Eren, J. Appl. Polym. Sci., 136, 47935 (2019); https://doi.org/10.1002/app.47935
C. Zhang, Y. Jiang, S. Li, Z. Huang, X.Q. Zhan, N. Ma and F.C. Tsai, Heliyon, 8, e11225 (2022); https://doi.org/10.1016/j.heliyon.2022.e11225
M. Barbalini, M. Bartoli, A. Tagliaferro and G. Malucelli, Polymers, 12, 811 (2020); https://doi.org/10.3390/polym12040811
S. Li, X. Lin, Y. Liu, R. Li, X. Ren and T.S. Huang, Cellulose, 26, 4213 (2019); https://doi.org/10.1007/s10570-019-02373-5
F. Fang, X. Chen, X. Zhang, C. Cheng, D. Xiao, Y. Meng, X. Ding, H. Zhang and X. Tian, Prog. Org. Coat., 90, 258 (2016); https://doi.org/10.1016/j.porgcoat.2015.09.025
H.H. Kim, M.J. Sim, J.C. Lee and S.H. Cha, J. Mater. Sci., 58, 6850 (2023); https://doi.org/10.1007/s10853-023-08414-6
P. He, X. Chen, P. Zhu, J. Liu, G. Fan, J. Sui, Z. Lu and C. Dong, J. Therm. Anal. Calorim., 132, 1771 (2018); https://doi.org/10.1007/s10973-018-7057-6
J. Liu, C. Dong, Z. Zhang, H. Sun, D. Kong and Z. Lu, Cellulose, 27, 9027 (2020); https://doi.org/10.1007/s10570-020-03370-9
B. Wang, Y.J. Xu, P. Li, F.Q. Zhang, Y. Liu and P. Zhu, Appl. Surf. Sci., 509, 145323 (2020); https://doi.org/10.1016/j.apsusc.2020.145323
D. Kong, J. Liu, Z. Zhang, S. Wang and Z. Lu, Cellulose, 28, 8115 (2021); https://doi.org/10.1007/s10570-021-04019-x
A. Aksit, N. Onar, B. Kutlu, E. Sergin and I. Yakin, Int. J. Cloth. Sci. Technol., 28, 319 (2016); https://doi.org/10.1108/IJCST-03-2016-0029
S. Nehra and J.B. Dahiya, Fibers Polym., 15, 2495 (2014); https://doi.org/10.1007/s12221-014-2495-7
W. Wang, J. Guo, X. Liu, H. Li, J. Sun, X. Gu, J. Wang, S. Zhang and W. Li, Cellulose, 27, 5377 (2020); https://doi.org/10.1007/s10570-020-03140-7
K. Liu, Y. Lu, Y. Cheng, J. Li, G. Zhang and F. Zhang, Cellulose, 31, 3243 (2024); https://doi.org/10.1007/s10570-024-05785-0
Y. Ma, Y. Wang, L. Ma and Z. Zhu, Cellulose, 30, 11829 (2023); https://doi.org/10.1007/s10570-023-05586-x
P. Cheah, C.N. Bhikha, J.H. O’Haver and A.E. Smith, Int. J. Polym. Sci., 2017, 6308603 (2017); https://doi.org/10.1155/2017/6308603
P. Arora, S.P. Singh and V. Arora, Int. J. Biotech Trends Technol., 5, 1 (2015); https://doi.org/10.14445/22490183/IJBTT-V9P601
D.V. Le, M.M. Kendrick and E.A. O’Rear, Langmuir, 20, 7802 (2004); https://doi.org/10.1021/la049898m
H.J. Barraza, Y.K. Hamidi, L. Aktas, E.A. O’Rear and M.C. Altan, Compos. Interfaces, 24, 125 (2017); https://doi.org/10.1080/09276440.2016.1193345
R. Nazir and S. Gaan, J. Appl. Polym. Sci., 137, 47910 (2020); https://doi.org/10.1002/app.47910
A. Saeed, D.M.R. Georget and A.G. Mayes, React. Funct. Polym., 70, 230 (2010); https://doi.org/10.1016/j.reactfunctpolym.2009.12.004
M.T. Nakhjiri, G. Bagheri Marandi and M. Kurdtabar, J. Polym. Res., 25, 244 (2018); https://doi.org/10.1007/s10965-018-1625-0
K. Rani and J.B. Dahiya, Rasayan J. Chem., 19, 1 (2026); https://doi.org/10.31788/RJC.2026.1919443