Copyright (c) 2014 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Effective Recovery of Acetic Acid from Wood Vinegar by Reactive Distillation using Tungstophosphoric Acid-Active Carbon Catalyst
Corresponding Author(s) : Sansan Yu
Asian Journal of Chemistry,
Vol. 26 No. 21 (2014): Vol 26 Issue 21
Abstract
The recovery of acetic acid from wood vinegar by reactive distillation using tungstophosphoric acid-active carbon as catalyst has been studied. Methyl acetate is obtained as esterification product at the top of column. The loading capacity of tungstophosphoric acid on active carbon was optimized using batch distillation. In addition, the influence of various factors such as feed flow rate, MeOH vapor rate, rectifying section height and reflux ratio, on the conversion rate of acetic acid were investigated by using a model solution. A 71.94 % recovery of acetic acid is obtained from wood vinegar under the following optimal conditions: loading capacity 33 %, feed flow rate 60 g/h, MeOH vapor rate 114 g/h, rectifying section height 250 mm and reflux ratio 9:1.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- L.G. Wei, B.W. Lu, Y.C. Ma and Z.Y. Li, Chem. Ind. Forest. Prod., 31, 12 (2011).
- Y.X. Li and H.W. Lin, J. Anal. Sci., 28, 58 (2012).
- S.J. Wang and K.J. Huang, Chem. Eng. Process., 60, 65 (2012); doi:10.1016/j.cep.2012.05.006.
- H. Demiral and M.E. Yildirim, Water Sci. Technol., 47, 183 (2003).
- R.P. Bhatt and S.B. Thakore, Int. J. Sci. Eng. Technol., 1, 46 (2012).
- C C.-H. Shin, J.-Y. Kim, J.-Y. Kim, H.-S. Kim, H.-S. Lee, D. Mohapatra, J.-W. Ahn, J.-G. Ahn and W. Bae, J. Hazard. Mater., 162, 1278 (2009); doi:10.1016/j.jhazmat.2008.06.029.
- P. Kalaichelvi, M. Perumalsamy, A. Arunagiri and K. Sofiya, J. Univ. Chem. Technol. Metall., 42, 291 (2007).
- S.Y. Cheng and W. Huang, Coal Chem. Ind. J., 5, 9 (2010).
- V. Ragaini, C.L. Bianchi and C. Pirola, Chem. Eng. J., 131, 257 (2007); doi:10.1016/j.cej.2006.12.008.
- Z. Xu, A. Afacan and K.T. Chuang, Can. J. Chem. Eng., 77, 676 (1999); doi:10.1002/cjce.5450770408.
- R. Kumar and S.M. Mahajani, Ind. Eng. Chem. Res., 46, 6873 (2007); doi:10.1021/ie061274j.
- W.-J. Hung, I.-K. Lai, Y.-W. Chen, S.-B. Hung, H.-P. Huang, M.-J. Lee and C.-C. Yu, Ind. Eng.
- Chem. Res., 45, 1722 (2006); doi:10.1021/ie050604h.
- Z.G. Zhang, X.F. Li, S.M. Xu and X.G. Li, Tianjin. Univ., 12, 264 (2006).
- A. Singh, A. Tiwari, S.M. Mahajani and R.D. Gudi, Ind. Eng. Chem. Res., 45, 2017 (2006); doi:10.1021/ie0505514.
- T. Suman, S. Srinivas and S.M. Mahajani, Ind. Eng. Chem. Res., 48, 9461 (2009); doi:10.1021/ie801886q.
- Y.H. Li, S.B. Yu, X.G. Yuan and H. Wang, Ind. Eng. Chem. Res., 41, 4936 (2002); doi:10.1021/ie010755u.
- Y. Li, W. Chu, M.H. Chen and J.Y. Hu, J. Wuhan, Univ. Technol. (Mater. Sci. Ed.), 2, 234 (2008).
- H. Atia, U. Armbruster and A. Martin, Appl. Catal. A, 393, 331 (2011); doi:10.1016/j.apcata.2010.12.015.
- K. Sandesh, P.E. JagadeeshBabu, S. Math and M.B. Saidutta, Ind. Eng. Chem. Res., 52, 6984 (2013); doi:10.1021/ie3029174.
References
L.G. Wei, B.W. Lu, Y.C. Ma and Z.Y. Li, Chem. Ind. Forest. Prod., 31, 12 (2011).
Y.X. Li and H.W. Lin, J. Anal. Sci., 28, 58 (2012).
S.J. Wang and K.J. Huang, Chem. Eng. Process., 60, 65 (2012); doi:10.1016/j.cep.2012.05.006.
H. Demiral and M.E. Yildirim, Water Sci. Technol., 47, 183 (2003).
R.P. Bhatt and S.B. Thakore, Int. J. Sci. Eng. Technol., 1, 46 (2012).
C C.-H. Shin, J.-Y. Kim, J.-Y. Kim, H.-S. Kim, H.-S. Lee, D. Mohapatra, J.-W. Ahn, J.-G. Ahn and W. Bae, J. Hazard. Mater., 162, 1278 (2009); doi:10.1016/j.jhazmat.2008.06.029.
P. Kalaichelvi, M. Perumalsamy, A. Arunagiri and K. Sofiya, J. Univ. Chem. Technol. Metall., 42, 291 (2007).
S.Y. Cheng and W. Huang, Coal Chem. Ind. J., 5, 9 (2010).
V. Ragaini, C.L. Bianchi and C. Pirola, Chem. Eng. J., 131, 257 (2007); doi:10.1016/j.cej.2006.12.008.
Z. Xu, A. Afacan and K.T. Chuang, Can. J. Chem. Eng., 77, 676 (1999); doi:10.1002/cjce.5450770408.
R. Kumar and S.M. Mahajani, Ind. Eng. Chem. Res., 46, 6873 (2007); doi:10.1021/ie061274j.
W.-J. Hung, I.-K. Lai, Y.-W. Chen, S.-B. Hung, H.-P. Huang, M.-J. Lee and C.-C. Yu, Ind. Eng.
Chem. Res., 45, 1722 (2006); doi:10.1021/ie050604h.
Z.G. Zhang, X.F. Li, S.M. Xu and X.G. Li, Tianjin. Univ., 12, 264 (2006).
A. Singh, A. Tiwari, S.M. Mahajani and R.D. Gudi, Ind. Eng. Chem. Res., 45, 2017 (2006); doi:10.1021/ie0505514.
T. Suman, S. Srinivas and S.M. Mahajani, Ind. Eng. Chem. Res., 48, 9461 (2009); doi:10.1021/ie801886q.
Y.H. Li, S.B. Yu, X.G. Yuan and H. Wang, Ind. Eng. Chem. Res., 41, 4936 (2002); doi:10.1021/ie010755u.
Y. Li, W. Chu, M.H. Chen and J.Y. Hu, J. Wuhan, Univ. Technol. (Mater. Sci. Ed.), 2, 234 (2008).
H. Atia, U. Armbruster and A. Martin, Appl. Catal. A, 393, 331 (2011); doi:10.1016/j.apcata.2010.12.015.
K. Sandesh, P.E. JagadeeshBabu, S. Math and M.B. Saidutta, Ind. Eng. Chem. Res., 52, 6984 (2013); doi:10.1021/ie3029174.