Copyright (c) 2014 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Synthesis and Evluation of Lignosulphonate Mannich Base as Eco-Friendly Corrosion Inhibitors
Corresponding Author(s) : Jie Zhang
Asian Journal of Chemistry,
Vol. 26 No. 22 (2014): Vol 26 Issue 22
Abstract
According to the corrosion of oilfield acidification, this paper mainly used aliphatic amine, methanal and sodium lignosulphonate as the main raw materials to produce a new Mannich base as an eco-friendly corrosion inhibitor. The inhibition of mild steel corrosion in 5 % hydrochloric acid solution by Mannich bases was studied by weight loss technique. Through single factor experiments, determined the optimal mole ratio and the types of raw material are selected. Meanwhile, the influences of temperature and corrosion inhibitor dosage on the corrosion inhibiting performance of the products were studied. Their adsorptions on the surface of mild steel and inhibition mechanism were also discussed.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- Y.F. Yang, X.T. Zhao and G.M. Qiu, Corros. Protect. Petrochem. Ind., 24, 6 (2007).
- L.S. Jian, Y.H. Jiang and W.J. Guang, Oilfield Chem., 25, 118 (2008).
- Z. Yong, L. Yuan and Z. Ying, Chem. Eur. J., 30, 111 (2013).
- Z.W. Na, Z.F. Hua and W. Chan, Technol. Chemical Ind., 19, 6 (2011).
- Z.Y. Tong, Z.X. Li and Z.L. Ping, Modern Chemical Ind., 30, 63 (2010).
- Y. Xuan, Fine Chemicals, 18, 670 (2001).
- F. Bentiss, M. Traisnel and M. Lagrenee, Corros. Sci., 42, 127 (2000); doi:10.1016/S0010-938X(99)00049-9.
- G. Chen, M. Zhang, M. Pang, X. Hou, H. Su and J. Zhang, Res. Chem. Intermed., 39, 3545 (2013); doi:10.1007/s11164-012-0861-x.
- J. Zhang, Y. Song, H. Su, L. Zhang, G. Chen and J. Zhao, Chem. Cent. J., 7, 109 (2013); doi:10.1186/1752-153X-7-109.
- G. Chen, M. Zhang, J. Zhao, R. Zhou, Z. Meng and J. Zhang, Chem. Cent. J., 7, 83 (2013); doi:10.1186/1752-153X-7-83.
- M.M. Fares, A.K. Maayta and M.M. Al-Qudah, Corros. Sci., 60, 112 (2012); doi:10.1016/j.corsci.2012.04.002.
- I.A. Akpan and N.-A. O. Offiong, Int. J. Corros., Article ID 301689 (2013); doi:10.1155/2013/301689.
- S.A. Ali, H.A. Al-Muallem, S.U. Rahman and M.T. Saeed, Corros. Sci., 50, 3070 (2008); doi:10.1016/j.corsci.2008.08.011.
- G. Chen, N.W. Yang and Y. Tang, Drilling Fluid Completion Fluid, 27, 13 (2010).
- I.B. Obot, N.O. Obi-Egbedi and N.W. Odozi, Corros. Sci., 52, 923 (2010); doi:10.1016/j.corsci.2009.11.013.
- A.S. Fouda, S.A. EL-Sayyad and M. Abdallah, Anti-Corros. Methods Mater., 58, 63 (2011); doi:10.1108/00035591111110705.
- S.S. Shivakumar and K.N.S. Mohana, Eur. J. Chem., 3, 426 (2012); doi:10.5155/eurjchem.3.4.426-432.671.
- L.X. Hong, D.S. Duan and F. Hui, Protection, 32, 958 (2011).
- S. Issaadi, T. Douadi, A. Zouaoui, S. Chafaa, M.A. Khan and G. Bouet, Corros. Sci., 53, 1484 (2011); doi:10.1016/j.corsci.2011.01.022.
- M. El Azhar, B. Mernari, M. Traisnel, F. Bentiss and M. Lagrenée, Corros. Sci., 43, 2229 (2001); doi:10.1016/S0010-938X(01)00034-8.
References
Y.F. Yang, X.T. Zhao and G.M. Qiu, Corros. Protect. Petrochem. Ind., 24, 6 (2007).
L.S. Jian, Y.H. Jiang and W.J. Guang, Oilfield Chem., 25, 118 (2008).
Z. Yong, L. Yuan and Z. Ying, Chem. Eur. J., 30, 111 (2013).
Z.W. Na, Z.F. Hua and W. Chan, Technol. Chemical Ind., 19, 6 (2011).
Z.Y. Tong, Z.X. Li and Z.L. Ping, Modern Chemical Ind., 30, 63 (2010).
Y. Xuan, Fine Chemicals, 18, 670 (2001).
F. Bentiss, M. Traisnel and M. Lagrenee, Corros. Sci., 42, 127 (2000); doi:10.1016/S0010-938X(99)00049-9.
G. Chen, M. Zhang, M. Pang, X. Hou, H. Su and J. Zhang, Res. Chem. Intermed., 39, 3545 (2013); doi:10.1007/s11164-012-0861-x.
J. Zhang, Y. Song, H. Su, L. Zhang, G. Chen and J. Zhao, Chem. Cent. J., 7, 109 (2013); doi:10.1186/1752-153X-7-109.
G. Chen, M. Zhang, J. Zhao, R. Zhou, Z. Meng and J. Zhang, Chem. Cent. J., 7, 83 (2013); doi:10.1186/1752-153X-7-83.
M.M. Fares, A.K. Maayta and M.M. Al-Qudah, Corros. Sci., 60, 112 (2012); doi:10.1016/j.corsci.2012.04.002.
I.A. Akpan and N.-A. O. Offiong, Int. J. Corros., Article ID 301689 (2013); doi:10.1155/2013/301689.
S.A. Ali, H.A. Al-Muallem, S.U. Rahman and M.T. Saeed, Corros. Sci., 50, 3070 (2008); doi:10.1016/j.corsci.2008.08.011.
G. Chen, N.W. Yang and Y. Tang, Drilling Fluid Completion Fluid, 27, 13 (2010).
I.B. Obot, N.O. Obi-Egbedi and N.W. Odozi, Corros. Sci., 52, 923 (2010); doi:10.1016/j.corsci.2009.11.013.
A.S. Fouda, S.A. EL-Sayyad and M. Abdallah, Anti-Corros. Methods Mater., 58, 63 (2011); doi:10.1108/00035591111110705.
S.S. Shivakumar and K.N.S. Mohana, Eur. J. Chem., 3, 426 (2012); doi:10.5155/eurjchem.3.4.426-432.671.
L.X. Hong, D.S. Duan and F. Hui, Protection, 32, 958 (2011).
S. Issaadi, T. Douadi, A. Zouaoui, S. Chafaa, M.A. Khan and G. Bouet, Corros. Sci., 53, 1484 (2011); doi:10.1016/j.corsci.2011.01.022.
M. El Azhar, B. Mernari, M. Traisnel, F. Bentiss and M. Lagrenée, Corros. Sci., 43, 2229 (2001); doi:10.1016/S0010-938X(01)00034-8.