This work is licensed under a Creative Commons Attribution 4.0 International License.
Enhanced Anticorrosive Properties of Silane Functionalized Polybenzoxazine@CeO2 Nanocomposites with Polyurethane Coatings on Mild Steel
Corresponding Author(s) : M. Sivaraju
Asian Journal of Chemistry,
Vol. 35 No. 8 (2023): Vol 35 Issue 8, 2023
Abstract
In this study, the durability of polyurethane adhesives are successfully developed using silane-functionalized polybenzoxazine@CeO2 nanocomposites. The electrochemical measurements were used to investigate the mechanical strength of polybenzoxazine nanocomposite with polyurethane materials. The superior results in the process of passivation film that also controlled the dissolution of metal have been characterized by UV-visible, XRD, SEM/EDX, FT IR, TGA-DTA-DSC, micro hardness, gel absorption and water absorption analyses. The mechanical performance of the coated surface that supported up the electrochemical investigations was enhanced by the incorporation of silane functionalized polybenzoxazine@CeO2 nanocomposites with polyurethane. The use of ployurthane in the TGA process increases the cross-linked density of the coating, resulting in high thermal stability. As a result of their superior anticorrosive property, the proposed polybenzoxazine@CeO2 nanocomposites with polyurethane films offer the openings for the development of unique, state-of-the-art anticorrosive adhesives across a wide range of sectors.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- H. Deng, L. Lin, M. Ji, S. Zhang, M. Yang and Q. Fu, Prog. Polym. Sci., 39, 627 (2014); https://doi.org/10.1016/j.progpolymsci.2013.07.007
- T. Agag and T. Takeichi, Polymer, 52, 2757 (2011); https://doi.org/10.1016/j.polymer.2011.04.044
- N.K. Kwon, H. Kim, I.K. Han, T.J. Shin, H.-W. Lee, J. Park and S.Y. Kim, ACS Macro Lett., 7, 962 (2018); https://doi.org/10.1021/acsmacrolett.8b00475
- Y. Kuang, L. Zhao, S. Zhang, F. Zhang, M. Dong and S. Xu, Materials, 3, 5220 (2010); https://doi.org/10.3390/ma3125220
- J.-M. Yeh, S.-J. Liou, C.-Y. Lai, P.-C. Wu and T.-Y. Tsai, Chem. Mater., 13, 1131 (2001); https://doi.org/10.1021/cm000938r
- R. Bayan and K. Karak, Compos. Part A, 110, 142 (2018); https://doi.org/10.1016/j.compositesa.2018.04.024
- S.C. Endres, L.C. Ciacchi and L. Mädler, J. Aerosol Sci., 153, 105719 (2021); https://doi.org/10.1016/j.jaerosci.2020.105719
- S.-L. Bee, M.A.A. Abdullah, S.-T. Bee, L.T. Sin and A.R. Rahmat, Prog. Polym. Sci., 85, 57 (2018); https://doi.org/10.1016/j.progpolymsci.2018.07.003
- T.D. Dziubla, V.V. Shuvaev, N.K. Hong, B.J. Hawkins, M. Madesh, H. Takano, E. Simone, M.T. Nakada, A. Fisher, S.M. Albelda and V.R. Muzykantov, Biomaterials, 29, 215 (2008); https://doi.org/10.1016/j.biomaterials.2007.09.023
- C. Garnacho, R. Dhami, E. Simone, J. Leferovich, E.H. Schuchman, T. Dziubla, V. Muzykantov and S. Muro, J. Pharmacol. Exp. Ther., 325, 400 (2008); https://doi.org/10.1124/jpet.107.133298
- E.D. Hood, M. Chorny, C.F. Greineder, I. S. Alferiev, R.J. Levy and V.R. Muzykantov, Biomaterials, 35, 3708 (2014); https://doi.org/10.1016/j.biomaterials.2014.01.023
- K.M. Poole, C.E. Nelson, R.V. Joshi, J.R. Martin, M.K. Gupta, S.C. Haws, T.E. Kavanaugh, M.C. Skala and C.L. Duvall, Biomaterials, 41, 166 (2015); https://doi.org/10.1016/j.biomaterials.2014.11.016
- E. Hood, E. Simone, P. Wattamwar, T. Dziubla and V. Muzykantov, Nanomedicine, 6, 1257 (2011); https://doi.org/10.2217/nnm.11.92
- M.K. Gupta, J.R. Martin, T.A. Werfel, T. Shen, J.M. Page and C.L. Duvall, J. Am. Chem. Soc., 136, 14896 (2014); https://doi.org/10.1021/ja507626y
- N. Jayakumar, K. Karattu Veedu and N.K. Gopalan, ACS Appl. Nano Mater., 2, 2689 (2019); https://doi.org/10.1021/acsanm.9b00172
- Y. Yagci, B. Kiskan and N.N. Ghosh, J. Polym. Sci. A, 47, 5565 (2009); https://doi.org/10.1002/pola.23597
- S. Rimdusit, S. Tiptipakorn, C. Jubsilp and T. Takeichi, React. Funct. Polym., 73, 369 (2013); https://doi.org/10.1016/j.reactfunctpolym.2012.04.022
- Z. Zhang, L. Liu, D. Xu, R. Zhang, H. Shi, S. Luan and J. Yin, Acta Chim. Sin., 80, 1436 (2022); https://doi.org/10.6023/A21120593
- L. Qu and Z. Xin, Langmuir, 27, 8365 (2011); https://doi.org/10.1021/la200073v
- L. Liu, F. Wang, Y. Zhu and H. Qi, Polymer, 51, 5567, (2022); https://doi.org/10.1177/09540083221128295
- C. Zhou, X. Lu, Z. Xin and J. Liu, Corros. Sci., 70, 145 (2013); https://doi.org/10.1016/j.corsci.2013.01.023
- C. Yan, X. Fan, J. Li and S.Z. Shen, J. Appl. Polym. Sci., 120, 1525 (2011); https://doi.org/10.1002/app.33383
- C. Zhou, X. Lu, Z. Xin, J. Liu and Y. Zhang, Corros. Sci., 80, 269 (2014); https://doi.org/10.1016/j.corsci.2013.11.042
- X. Ning and H. Ishida, J. Polym. Sci. A Polym. Chem., 32, 1121 (1994); https://doi.org/10.1002/pola.1994.080320614
- J.A. Macko and H. Ishida, Polymer, 42, 6371 (2001); https://doi.org/10.1016/S0032-3861(01)00055-6
- R.-C. Lin and S.-W. Kuo, RSC Adv., 8, 13592 (2018); https://doi.org/10.1039/C8RA00506K
- X. Yang, S. Fan, Y. Li, Y. Guo, Y. Li, K. Ruan, S. Zhang, J. Zhang, J. Kong and J. Gu, Compos., Part A Appl. Sci. Manuf., 128, 105670 (2020); https://doi.org/10.1016/j.compositesa.2019.105670
- M. Mohamad, J.A. Razak, N. Mohamad, S.H. Ahmad, R. Junid and P. Puspitasari, IOP Conf. Ser.: Mater. Sci. Eng., 957, 012029 (2020); https://doi.org/10.1088/1757-899X/957/1/012029
- Sudha and Sarojadevi, High Perform. Polym., 28, 331 (2016); https://doi.org/10.1177/0954008315580822
- K.S. Kumar and N.V. Jaya, Asian J. Chem., 25, 6095 (2013); https://doi.org/10.14233/ajchem.2013.14267
- H. Li, G. Wang, F. Zhang, Y. Cai, Y. Wang and I. Djerdj, RSC Adv., 2, 12413 (2012); https://doi.org/10.1039/c2ra21590j
- S.K. Kannan and M. Sundrarajan, Int. J. Nanosci., 13, 1450018 (2014); https://doi.org/10.1142/S0219581X14500185
- K. Kalantar-zadeh and B. Fry, Nanotechnol.-Enabled Sensors, 211, 211 (2008); https://doi.org/10.1007/978-0-387-68023-1_5
- P. Sharma, B. Lochab, D. Kumar and P.K. Roy, ACS Sustain. Chem. Eng., 4, 1085 (2016); https://doi.org/10.1021/acssuschemeng.5b01153
- B. Lochab, M. Monisha, N. Amarnath, P. Sharma, S. Mukherjee and H. Ishida, Polymers, 13, 1260 (2021); https://doi.org/10.3390/polym13081260
- M.S. Pujar, S.M. Hunagund, V.R. Desai and A.H. Sidarai, Bull. Mater. Sci., 43, 24 (2018); https://doi.org/10.5185/amp.2018/019
- J. Hou, L. Huo, C. He, C. Yang and Y. Li, Macromolecules, 39, 594 (2006); https://doi.org/10.1021/ma051883n
- C. Aouf, H. Nouailhas, M. Fache, S. Caillol, B. Boutevin and H. Fulcrand, Eur. Polym. J., 49, 1185 (2013); https://doi.org/10.1016/j.eurpolymj.2012.11.025
- S. Pirstpindvong, W. Tanthapanichakoon, S. Damrongsakkul and S. Rimdusit, Polym. Eng. Sci., 45, 288 (2005); https://doi.org/10.1002/pen.20273
- S.D. Silbert, E.M. Serum, J. LaScala, M.P. Sibi and D.C. Webster, ACS Sustain. Chem. Eng., 7, 19621 (2019); https://doi.org/10.1021/acssuschemeng.9b04713
- X. Luo, F. Gao, F. Chen, Q. Cheng, J. Zhao, X. Wei, C. Lin, J. Zhong and L. Shen, RSC Adv., 10, 15881 (2020); https://doi.org/10.1039/D0RA01279C
- M.S. Pujar, S.M. Hunagund, V.R. Desai, S. Patil and A.H. Sidarai, AIP Conf. Proc., 1942, 050026 (2018); https://doi.org/10.1063/1.5028657
- J. Chen, M. Zeng, Z. Feng, T. Pang, Y. Huang and Q. Xu, ACS Appl. Polym. Mater., 1, 625 (2019); https://doi.org/10.1021/acsapm.8b00083
- M. Ohara, K. Yoshimoto, T. Kawauchi and T. Takeichi, Polymer, 202, 122668 (2020); https://doi.org/10.1016/j.polymer.2020.122668
- P. Sharma, P. Dutta and L. Nebhani, Polymer, 184, 121905 (2019); https://doi.org/10.1016/j.polymer.2019.121905
References
H. Deng, L. Lin, M. Ji, S. Zhang, M. Yang and Q. Fu, Prog. Polym. Sci., 39, 627 (2014); https://doi.org/10.1016/j.progpolymsci.2013.07.007
T. Agag and T. Takeichi, Polymer, 52, 2757 (2011); https://doi.org/10.1016/j.polymer.2011.04.044
N.K. Kwon, H. Kim, I.K. Han, T.J. Shin, H.-W. Lee, J. Park and S.Y. Kim, ACS Macro Lett., 7, 962 (2018); https://doi.org/10.1021/acsmacrolett.8b00475
Y. Kuang, L. Zhao, S. Zhang, F. Zhang, M. Dong and S. Xu, Materials, 3, 5220 (2010); https://doi.org/10.3390/ma3125220
J.-M. Yeh, S.-J. Liou, C.-Y. Lai, P.-C. Wu and T.-Y. Tsai, Chem. Mater., 13, 1131 (2001); https://doi.org/10.1021/cm000938r
R. Bayan and K. Karak, Compos. Part A, 110, 142 (2018); https://doi.org/10.1016/j.compositesa.2018.04.024
S.C. Endres, L.C. Ciacchi and L. Mädler, J. Aerosol Sci., 153, 105719 (2021); https://doi.org/10.1016/j.jaerosci.2020.105719
S.-L. Bee, M.A.A. Abdullah, S.-T. Bee, L.T. Sin and A.R. Rahmat, Prog. Polym. Sci., 85, 57 (2018); https://doi.org/10.1016/j.progpolymsci.2018.07.003
T.D. Dziubla, V.V. Shuvaev, N.K. Hong, B.J. Hawkins, M. Madesh, H. Takano, E. Simone, M.T. Nakada, A. Fisher, S.M. Albelda and V.R. Muzykantov, Biomaterials, 29, 215 (2008); https://doi.org/10.1016/j.biomaterials.2007.09.023
C. Garnacho, R. Dhami, E. Simone, J. Leferovich, E.H. Schuchman, T. Dziubla, V. Muzykantov and S. Muro, J. Pharmacol. Exp. Ther., 325, 400 (2008); https://doi.org/10.1124/jpet.107.133298
E.D. Hood, M. Chorny, C.F. Greineder, I. S. Alferiev, R.J. Levy and V.R. Muzykantov, Biomaterials, 35, 3708 (2014); https://doi.org/10.1016/j.biomaterials.2014.01.023
K.M. Poole, C.E. Nelson, R.V. Joshi, J.R. Martin, M.K. Gupta, S.C. Haws, T.E. Kavanaugh, M.C. Skala and C.L. Duvall, Biomaterials, 41, 166 (2015); https://doi.org/10.1016/j.biomaterials.2014.11.016
E. Hood, E. Simone, P. Wattamwar, T. Dziubla and V. Muzykantov, Nanomedicine, 6, 1257 (2011); https://doi.org/10.2217/nnm.11.92
M.K. Gupta, J.R. Martin, T.A. Werfel, T. Shen, J.M. Page and C.L. Duvall, J. Am. Chem. Soc., 136, 14896 (2014); https://doi.org/10.1021/ja507626y
N. Jayakumar, K. Karattu Veedu and N.K. Gopalan, ACS Appl. Nano Mater., 2, 2689 (2019); https://doi.org/10.1021/acsanm.9b00172
Y. Yagci, B. Kiskan and N.N. Ghosh, J. Polym. Sci. A, 47, 5565 (2009); https://doi.org/10.1002/pola.23597
S. Rimdusit, S. Tiptipakorn, C. Jubsilp and T. Takeichi, React. Funct. Polym., 73, 369 (2013); https://doi.org/10.1016/j.reactfunctpolym.2012.04.022
Z. Zhang, L. Liu, D. Xu, R. Zhang, H. Shi, S. Luan and J. Yin, Acta Chim. Sin., 80, 1436 (2022); https://doi.org/10.6023/A21120593
L. Qu and Z. Xin, Langmuir, 27, 8365 (2011); https://doi.org/10.1021/la200073v
L. Liu, F. Wang, Y. Zhu and H. Qi, Polymer, 51, 5567, (2022); https://doi.org/10.1177/09540083221128295
C. Zhou, X. Lu, Z. Xin and J. Liu, Corros. Sci., 70, 145 (2013); https://doi.org/10.1016/j.corsci.2013.01.023
C. Yan, X. Fan, J. Li and S.Z. Shen, J. Appl. Polym. Sci., 120, 1525 (2011); https://doi.org/10.1002/app.33383
C. Zhou, X. Lu, Z. Xin, J. Liu and Y. Zhang, Corros. Sci., 80, 269 (2014); https://doi.org/10.1016/j.corsci.2013.11.042
X. Ning and H. Ishida, J. Polym. Sci. A Polym. Chem., 32, 1121 (1994); https://doi.org/10.1002/pola.1994.080320614
J.A. Macko and H. Ishida, Polymer, 42, 6371 (2001); https://doi.org/10.1016/S0032-3861(01)00055-6
R.-C. Lin and S.-W. Kuo, RSC Adv., 8, 13592 (2018); https://doi.org/10.1039/C8RA00506K
X. Yang, S. Fan, Y. Li, Y. Guo, Y. Li, K. Ruan, S. Zhang, J. Zhang, J. Kong and J. Gu, Compos., Part A Appl. Sci. Manuf., 128, 105670 (2020); https://doi.org/10.1016/j.compositesa.2019.105670
M. Mohamad, J.A. Razak, N. Mohamad, S.H. Ahmad, R. Junid and P. Puspitasari, IOP Conf. Ser.: Mater. Sci. Eng., 957, 012029 (2020); https://doi.org/10.1088/1757-899X/957/1/012029
Sudha and Sarojadevi, High Perform. Polym., 28, 331 (2016); https://doi.org/10.1177/0954008315580822
K.S. Kumar and N.V. Jaya, Asian J. Chem., 25, 6095 (2013); https://doi.org/10.14233/ajchem.2013.14267
H. Li, G. Wang, F. Zhang, Y. Cai, Y. Wang and I. Djerdj, RSC Adv., 2, 12413 (2012); https://doi.org/10.1039/c2ra21590j
S.K. Kannan and M. Sundrarajan, Int. J. Nanosci., 13, 1450018 (2014); https://doi.org/10.1142/S0219581X14500185
K. Kalantar-zadeh and B. Fry, Nanotechnol.-Enabled Sensors, 211, 211 (2008); https://doi.org/10.1007/978-0-387-68023-1_5
P. Sharma, B. Lochab, D. Kumar and P.K. Roy, ACS Sustain. Chem. Eng., 4, 1085 (2016); https://doi.org/10.1021/acssuschemeng.5b01153
B. Lochab, M. Monisha, N. Amarnath, P. Sharma, S. Mukherjee and H. Ishida, Polymers, 13, 1260 (2021); https://doi.org/10.3390/polym13081260
M.S. Pujar, S.M. Hunagund, V.R. Desai and A.H. Sidarai, Bull. Mater. Sci., 43, 24 (2018); https://doi.org/10.5185/amp.2018/019
J. Hou, L. Huo, C. He, C. Yang and Y. Li, Macromolecules, 39, 594 (2006); https://doi.org/10.1021/ma051883n
C. Aouf, H. Nouailhas, M. Fache, S. Caillol, B. Boutevin and H. Fulcrand, Eur. Polym. J., 49, 1185 (2013); https://doi.org/10.1016/j.eurpolymj.2012.11.025
S. Pirstpindvong, W. Tanthapanichakoon, S. Damrongsakkul and S. Rimdusit, Polym. Eng. Sci., 45, 288 (2005); https://doi.org/10.1002/pen.20273
S.D. Silbert, E.M. Serum, J. LaScala, M.P. Sibi and D.C. Webster, ACS Sustain. Chem. Eng., 7, 19621 (2019); https://doi.org/10.1021/acssuschemeng.9b04713
X. Luo, F. Gao, F. Chen, Q. Cheng, J. Zhao, X. Wei, C. Lin, J. Zhong and L. Shen, RSC Adv., 10, 15881 (2020); https://doi.org/10.1039/D0RA01279C
M.S. Pujar, S.M. Hunagund, V.R. Desai, S. Patil and A.H. Sidarai, AIP Conf. Proc., 1942, 050026 (2018); https://doi.org/10.1063/1.5028657
J. Chen, M. Zeng, Z. Feng, T. Pang, Y. Huang and Q. Xu, ACS Appl. Polym. Mater., 1, 625 (2019); https://doi.org/10.1021/acsapm.8b00083
M. Ohara, K. Yoshimoto, T. Kawauchi and T. Takeichi, Polymer, 202, 122668 (2020); https://doi.org/10.1016/j.polymer.2020.122668
P. Sharma, P. Dutta and L. Nebhani, Polymer, 184, 121905 (2019); https://doi.org/10.1016/j.polymer.2019.121905