Copyright (c) 2023 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Role of Chemical based Inhibitors in Protecting the Concrete Structures from Corrosion: Present Status and Future Prospects: A Review
Corresponding Author(s) : Arputharaj Samson Nesaraj
Asian Journal of Chemistry,
Vol. 35 No. 2 (2023): Vol 35 Issue 2, 2023
Abstract
Building industry is a rapid growing worldwide because of urbanization. Concrete is a primary requirement in the construction of residential buildings, shopping malls, industry structures, etc. The life of a building mainly depends on the ingredients used in the concrete during the construction activity. However, the concrete structures undergo deterioration because of the presence of highly corrosive ions in the admixture after long term. If the corrosion of the steel rods is severe in concrete, the buildings may collapse at any time which will lead to heavy loss for human lives. In this regard, protection of steel embedded in concrete from the corrosive attack is an important issue among civil engineering professionals and chemists. For this purpose, the technologies related to the adoption of suitable composition of steel, suitable combination of ingredients in the concrete, change of processing parameters/methodologies, etc. are being worked out. Apart from this, suitable chemical inhibitors are being studied across the globe to overcome this corrosion problem in a greater extent. In this review article, the type of chemical inhibitors used in admixtures and their effective role in protecting the concrete structures are discussed. Based on this, suitable suggestions are also recommended for the benefit of the society.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- T. Gunawardena and P. Mendis, Encyclopedia, 2, 70 (2022); https://doi.org/10.3390/encyclopedia2010006
- H.S. Link and R.J. Schmitt, Ind. Eng. Chem., 53, 590 (1961); https://doi.org/10.1021/ie50619a036
- C. Bartlett, Nexus Netw. J., 16, 299 (2014); https://doi.org/10.1007/s00004-014-0193-9
- H. Higashiyama, K. Yamauchi, M. Sappakittipakorn, M. Sano and O. Takahashi, Constr. Build. Mater., 40, 1021 (2013); https://doi.org/10.1016/j.conbuildmat.2012.11.078
- Y. Pawar and S. Kate, Int. Res. J. Eng. Technol., 7, 1820 (2020).
- X. Xian, D. Zhang and Y. Shao, J. Clean. Prod., 313, 127943 (2021); https://doi.org/10.1016/j.jclepro.2021.127943
- F. Zhang, X. Xi and S. Yang, Corros. Mater. Degrad., 2, 641 (2021); https://doi.org/10.3390/cmd2040034
- Y. Sumra, S. Payam and I. Zainah, J. Wuhan Univ. Technol.-Mater. Sci. Educ., 35, 908 (2020); https://doi.org/10.1007/s11595-020-2337-y
- A. James, E. Bazarchi, A.A. Chiniforush, P. Panjebashi Aghdam, M.R. Hosseini, A. Akbarnezhad, I. Martek and F. Ghodoosi, Constr. Build. Mater., 224, 1026 (2019); https://doi.org/10.1016/j.conbuildmat.2019.07.250
- L. Zhang, D. Niu, B. Wen and D. Luo, Materials, 12, 4245 (2019); https://doi.org/10.3390/ma12244245
- Y.S. Choi, S.-T. Yi, M.Y. Kim, W.Y. Jung and E.I. Yang, Constr. Build. Mater., 54, 180 (2014); https://doi.org/10.1016/j.conbuildmat.2013.12.065
- F.J. Olguin Coca, M.U. Loya Tello, C. Gaona-Tiburcio, J.A. Romero and A. Martínez-Villafañe, Int. J. Electrochem. Sci., 6, 3438 (2011).
- M. Kaushal and G. Singh, Int. J. Innov. Res. Sci. Eng. Technol., 9, 11311 (2020).
- A. Shakya and M.U. Rizvi, Int. Res. J. Eng. Technol., 8, 336 (2021).
- J. Ress, U. Martin, J. Bosch and D.M. Bastidas, Coatings, 11, 113 (2021); https://doi.org/10.3390/coatings11020113
- H.Z. López-Calvo, P. Montes-Garcia, I. Kondratova, T.W. Bremner and M.D.A. Thomas, Mater. Corros., 64, 599 (2013); https://doi.org/10.1002/maco.201106319
- G.K. Al-Chaar, M. Alkadi and P.G. Asteris, Open Constr. Build. Technol. J., 7, 33 (2013); https://doi.org/10.2174/1874836801307010033
- N. Sharma and P. Sharma, IOP Conf. Series Mater. Sci. Eng., 1116, 012175 (2021); https://doi.org/10.1088/1757-899X/1116/1/012175
- L. Dembovska, D. Bajare, I. Pundiene and L. Vitola, Procedia Eng., 172, 202 (2017); https://doi.org/10.1016/j.proeng.2017.02.050
- R.B. Polder and H. de Vries, Heron, 46, 227 (2001).
- N. Gartner, T. Kosec and A. Legat, Materials, 13, 407 (2020); https://doi.org/10.3390/ma13020407
- D.V. Val and M.G. Stewart, Struct. Saf., 25, 343 (2003); https://doi.org/10.1016/S0167-4730(03)00014-6
- I.B. Topçu and A. Uzunömeroglu, J. Struct. Eng. Appl. Mechanics, 3, 93 (2020); https://doi.org/10.31462/jseam.2020.02093109
- K.T. Kim, H.W. Kim, H.Y. Chang, B.T. Lim, H.B. Park and Y.S. Kim, Adv. Mater. Sci. Eng., 2015, 408138 (2015); https://doi.org/10.1155/2015/408138
- T.D. Marcotte and C.M. Hansson, Mater. Struct., 40, 325 (2007); https://doi.org/10.1617/s11527-006-9170-4
- M.A. Quraishi, D.K. Nayak, R. Kumar and V. Kumar, J. Steel Struct. Construct., 3, 1000124 (2017); https://doi.org/10.4172/2472-0437.1000124
- A. Fahrizal and T. Al-Ghareeb, Mod. Concepts Mater. Sci., 4(5) (2021); https://doi.org/10.33552/MCMS.2021.04.000594
- J.M. Gaidis, Cement Concr. Compos., 26, 181 (2004); https://doi.org/10.1016/S0958-9465(03)00037-4
- S. Marzorati, L. Verotta and S.P. Trasatti, Molecules, 24, 48 (2018); https://doi.org/10.3390/molecules24010048
- K.Y. Ann, H.S. Jung, H.S. Kim, S.S. Kim and H.Y. Moon, Cement Concr. Res., 36, 530 (2006); https://doi.org/10.1016/j.cemconres.2005.09.003
- Y. Song, J. Liu, H. Wang and H. Shu, Int. J. Corros., 2019, 3060869 (2019); https://doi.org/10.1155/2019/3060869
- V.L. Satish and V. Ravindra, IOP Conf. Series Mater. Sci. Eng., 1025, 012002 (2021); https://doi.org/10.1088/1757-899X/1025/1/012002
- J.M. Gaidis, J.T. Lundquist and A.M. Rosenberg, Mater. Perform., 18, 36 (1979).
- L. Jinsong, G. Qian, L. Jing and F. Lin, Int. J. Electrochem. Sci., 17, 22027 (2022); https://doi.org/10.20964/2022.02.35
- A.M. Alshamsi and A.H. Bushlaibi, Eng. J. Univ. Qatar, 13, 97 (2000).
- M. Devi, Int. J. Eng. Sci., 2, 23 (2013).
- B. Sangoju, B.H. Bharatkumar, P. Srinivasan, K. Ramanjaneyulu, R. Gettu and N.R. Iyer, J. Sci. Ind. Res., 74, 82 (2015).
- K.K. Sideris and A.E. Savva, Cement Concr. Compos., 27, 277 (2005); https://doi.org/10.1016/j.cemconcomp.2004.02.016
- M. Afrin and P. Kuldeep, Int. J. Eng. Develop. Res., 7, 273 (2019).
- J. Sørensen and L. Thorling, Geochim. Cosmochim. Acta, 55, 1289 (1991); https://doi.org/10.1016/0016-7037(91)90307-Q
- R. Dharmaraj and R. Malathy, Indian J. Sci. Technol., 8, 1 (2015); https://doi.org/10.17485/ijst/2015/v8i36/87647
- N.S. Teklegiorgis, B. Pradhan, J.K. Prusty and J.K. Das, J. Mater. Civ. Eng., 34, 04022007 (2022); https://doi.org/10.1061/(ASCE)MT.1943-5533.0004139
- V. Madhavan and C. Antony Jeyasehar, APRN Int. J. Eng. Appl. Sci., 5, 11 (2013).
- B.P. Maliekkal, J.T. Kakkassery and V.R. Palayoor, Int. J. Ind. Chem., 9, 105 (2018); https://doi.org/10.1007/s40090-018-0142-7
- M. Pandiarajan, S. Rajendran, J.S. Bama and R.J. Rathish, J. Chem. Pharm. Res., 7(10S), 120 (2015).
- G. Kilinççeker and N. Yesilyurt, Nat. Eng. Sci., 3, 87 (2018).
- X.-P. Wang, R.-G. Du, Y.-F. Zhu, Y. Guo, W. Chen, Z.-Y. Yang, S.-G. Dong and C.-J. Lin, ECS Trans., 50, 43 (2013); https://doi.org/10.1149/05050.0043ecst
- H. Hazehara, D.N. Katpady, M. Soeda, Y. Okabe and K. Era, Constr. Build. Mater., 264, 120586 (2020); https://doi.org/10.1016/j.conbuildmat.2020.120586
- H.-S. Lee and S.-W. Shin, Constr. Build. Mater., 21, 1 (2007); https://doi.org/10.1016/j.conbuildmat.2006.01.004
- K. Kobayashi and Y. Takagi, Cement Concr. Compos., 114, 103709 (2020); https://doi.org/10.1016/j.cemconcomp.2020.103709
- H.-S. Lee, H.-S. Ryu, W.-J. Park and M.A. Ismail, Materials, 8, 251 (2015); https://doi.org/10.3390/ma8010251
- V.T. Ngala, C.L. Page and M.M. Page, Corros. Sci., 45, 1523 (2003); https://doi.org/10.1016/S0010-938X(02)00248-2
- C. Alonso, C. Andrade, C. Argiz and B. Malric, Cement Concr. Res., 26, 405 (1996); https://doi.org/10.1016/S0008-8846(96)85028-9
- T. Chaussadent, V. Nobel-Pujol, F. Farcas, I. Mabille and C. Fiaud, Cement Concr. Res., 36, 556 (2006); https://doi.org/10.1016/j.cemconres.2005.09.006
- D.M. Bastidas, M. Criado, V.M. La Iglesia, S. Fajardo, A. La Iglesia and J.M. Bastidas, Cement Concr. Compos., 43, 31 (2013); https://doi.org/10.1016/j.cemconcomp.2013.06.005
- F. Tittarelli, A. Mobili and T. Bellezze, IOP Conf. Series Mater. Sci. Eng., 225, 012106 (2017); https://doi.org/10.1088/1757-899X/225/1/012106
- A. Douche-Portanguen, W. Prince, B. Malric and G. Arliguie, Cement Concr. Res., 35, 1714 (2005); https://doi.org/10.1016/j.cemconres.2004.12.008
- O.S.I. Fayomi, A.P.I. Popoola and O.O. Joseph, Energy Procedia, 119, 883 (2017); https://doi.org/10.1016/j.egypro.2017.07.141
- O.A. Omotosho, J.O. Okeniyi and O.O. Ajayi, J. Fail. Anal. Prev., 10, 408 (2010); https://doi.org/10.1007/s11668-010-9375-2
- J.O. Okeniyi, O.A. Omotosho, O.O. Ajayi and C.A. Loto, Constr. Build. Mater., 50, 448 (2014); https://doi.org/10.1016/j.conbuildmat.2013.09.063
- M. Pandiarajan, S. Rajendran and R.J. Rathish, Res. J. Chem. Sci., 4, 49 (2014).
- C.A. Loto, O.A. Omotosho and A.P.I. Popoola, Int. J. Phys. Sci., 6, 2275 (2011).
- O.S.I. Fayomi, A.P.I. Popoola, T. Oloruntoba and A.A. Ayoola, Cogent Eng., 4, 1318736 (2017); https://doi.org/10.1080/23311916.2017.1318736
- O.A. Omotosho, C.A. Loto and O.O. Ajayi, Int. J. Electrochem. Sci., 9, 2171 (2014).
- S.M. Meshari, Basrah J. Sci., 30, 142 (2012).
- L. Chen, D. Lu and Y. Zhang, Materials, 15, 2023 (2022); https://doi.org/10.3390/ma15062023
- M. Osial and D. Wiliñski, J. Building Chem., 1, 42 (2016).
- C.K. Nmai, Cement Concr. Compos., 26, 199 (2004); https://doi.org/10.1016/S0958-9465(03)00039-8
- A. de Valle-Moreno, A. Torres-Acosta, M. Martínez-Madrid and J. Terán-Guillén, Superficies y Vacío, 23, 188 (2010).
- Y. Tong, J. Ye, Q. Wang, H. Zhang, H. Yu and A.-O. Seibou, J. Asian Archit. Build. Eng., (2022); https://doi.org/10.1080/13467581.2022.2046004
- M. Ormellese, L. Lazzari, S. Goidanich, G. Fumagalli and A. Brenna, Corros. Sci., 51, 2959 (2009); https://doi.org/10.1016/j.corsci.2009.08.018
- S.K. Ahmed, W.B. Ali and A.A. Khadom, Int. J. Ind. Chem., 10, 159 (2019); https://doi.org/10.1007/s40090-019-0181-8
- H.S. Ryu, C.G. Lim, T.W. Kang, S. Lim, H.T. Kim and S.H. Shin, Adv. Mater. Sci. Eng., 2019, 8294360 (2019); https://doi.org/10.1155/2019/8294360
- R.K. Rai, A.S. Trivedi and M. Sharma, IOSR J. Mech. Civ. Eng., 13, 48 (2016).
- T.A. Nguyen and X. Shi, Anti-Corros. Methods Mater., 56, 3 (2009); https://doi.org/10.1108/00035590910923400
- G. Batis, P. Pantazopoulou and A. Routoulas, Cement Concr. Compos., 25, 371 (2003); https://doi.org/10.1016/S0958-9465(02)00061-6
- F. Wombacher, U. Maeder and B. Marazzani, Cement Concr. Compos., 26, 209 (2004); https://doi.org/10.1016/S0958-9465(03)00040-4
- C. Xu, W.L. Jin, H.L. Wang, H.T. Wu, N. Huang, Z.Y. Li and J.H. Mao, Constr. Build. Mater., 115, 602 (2016); https://doi.org/10.1016/j.conbuildmat.2016.04.076
- K.K. Sagoe-Crentsil, V.T. Yilmaz and F.P. Glasser, Cement Concr. Res., 23, 1380 (1993); https://doi.org/10.1016/0008-8846(93)90075-K
- Y.I. Kuznetsov and G.V. Redkina, Coatings, 12, 149 (2022); https://doi.org/10.3390/coatings12020149
- B. Lin and Y. Zuo, RSC Adv., 9, 7065 (2019); https://doi.org/10.1039/C8RA10083G
- B. Bavarian, A.O. Alaba, L. Reiner and J. Meyer, Mater. Perform., 57, 20 (2018).
- H.-S. Ryu, D.-M. Kim, S.-H. Shin, W.-J. Park and S.-J. Kwon, Int. J. Concr. Struct. Mater., 12, 13 (2018); https://doi.org/10.1186/s40069-018-0243-x
- Q. Xu, H. Gao, J. Zeng, C. Chen, W. Zhou, S. Wang, X. Tian and Y. Peng, Can. J. Chem. Eng., 94, 1909 (2016); https://doi.org/10.1002/cjce.22571
- M. Cabrini, F. Fontana, S. Lorenzi, T. Pastore and S. Pellegrini, J. Chem., 2015, 521507 (2015); https://doi.org/10.1155/2015/521507
- A.S. Fazayel, M. Khorasani and A.A. Sarabi, Appl. Surf. Sci., 441, 895 (2018); https://doi.org/10.1016/j.apsusc.2018.02.012
- Y. Peng, A.E. Hughes, J.I. Mardel, G.B. Deacon, P.C. Junk, M. Forsyth, B.R.W. Hinton and A.E. Somers, ACS Appl. Mater. Interfaces, 11, 36154 (2019); https://doi.org/10.1021/acsami.9b13722
- Y.P. Asmara, T. Kurniawan, A.G.E. Sutjipto and J. Jafar, Indonesian J. Sci. Technol., 3, 158 (2018); https://doi.org/10.17509/ijost.v3i2.12760
- K. Kavya, S. Keerthana and T. Pradeep, Eds.: S.K. Shukla, B.B. Das, S. Chandrasekaran and S. Kolathayar, Effect of Green Corrosion Inhibitors on the Properties of Mortar and Concrete, In: Smart Technologies for Sustainable Development, Lecture Notes in Civil Engineering, Springer: Singapore, vol. 78 (2021). https://doi.org/10.1007/978-981-15-5001-0_34
- B. Valdez-Salas, R. Vazquez-Delgado, J. Salvador-Carlos, E. Beltran-Partida, R. Salinas-Martinez, N. Cheng and M. Curiel-Alvarez, Materials, 14, 3326 (2021); https://doi.org/10.3390/ma14123326
- M. Ben Harb, S. Abubshait, N. Etteyeb, M. Kamoun and A. Dhouib, Arab. J. Chem., 13, 4846 (2020); https://doi.org/10.1016/j.arabjc.2020.01.016
- D.G. Eyu, H. Esah, C. Chukwuekezie, J. Idris and I. Mohammed, APRN J. Eng. Appl. Sci., 8, 326 (2013).
- K. Subbiah, H.-S. Lee, S. Mandal and T. Park, ACS Appl. Mater. Interfaces, 13, 43676 (2021); https://doi.org/10.1021/acsami.1c11994
- A. Lame (Galo), E. Kokalari (Teli) and A. Jano, Asian J. Chem., 25, 4017 (2013); https://doi.org/10.14233/ajchem.2013.13892
- C. Lisha, M. Rajalingam and S. George, Int. J. Eng. Sci. Invent. Res. Develop., 3, 687 (2017).
- N.K. Brixi, L. Sail and A. Bezzar, J. Adhes. Sci. Technol., 36, 1176 (2022); https://doi.org/10.1080/01694243.2021.1962090
- T. Ramesh, D.S. Chauhan and M.A. Quraishi, Int. J. Corros. Scale Inhib., 10, 618 (2021); https://doi.org/10.17675/2305-6894-2021-10-2-9
- I. Pradipta, D. Kong and J.T. Ban Lee, IOP Conf. Series Mater. Sci. Eng., 431, 042013 (2018); https://doi.org/10.1088/1757-899X/431/4/042013
- M.A. Quraishi, V. Kumar, B.N. Singh and S.K. Singh, J. Mater. Environ. Sci., 10, 1001 (2012).
- S.A. Asipita, M. Ismail, M.Z.A. Majid, Z.A. Majid, C.S. Abdullah and J. Mirza, J. Clean. Prod., 67, 139 (2014); https://doi.org/10.1016/j.jclepro.2013.12.033
- C. Kennedy, F.O.P. Kpae and T.A. Nadum, Int. J. Sci. Eng. Res., 9, 1590 (2018).
- Y. Cao, D. Zheng, S. Dong, F. Zhang, J. Lin, C. Wang and C. Lin, J. Electrochem. Soc., 166, C3106 (2019); https://doi.org/10.1149/2.0141911jes
- V. Saraswathy, S. Muralidharan, R.M. Kalyanasundaram, K. Thangavel and S. Srinivasan, Cement Concr. Res., 31, 789 (2001); https://doi.org/10.1016/S0008-8846(01)00468-9
- B. Yi, J. Wang, L. Feng, Y. Song, J. Liu and H. Shu, Adv. Civ. Eng., 2021, 6655080 (2021); https://doi.org/10.1155/2021/6655080
- Z. Liu, L. Yu and Q. Li, J. Wuhan Univ. Technol.-Mater. Sci. Educ., 30, 325 (2015); https://doi.org/10.1007/s11595-015-1148-z
- H.Z. Lopez-Calvo, P. Montes-Garcia, E.M. Alonso-Guzmán, W. Martinez-Molina, T.W. Bremner and M.D. Thomas, Can. J. Civ. Eng., 44, 918 (2017); https://doi.org/10.1139/cjce-2016-0237
- M. A. Qi, C.A.I. Jingshun, M.U. Song, Z. Xiaocheng, L. Kai, L. Jianzhong and L. Jiaping, J. Chin. Soc. Corros. Protect., 41, 659 (2021).
References
T. Gunawardena and P. Mendis, Encyclopedia, 2, 70 (2022); https://doi.org/10.3390/encyclopedia2010006
H.S. Link and R.J. Schmitt, Ind. Eng. Chem., 53, 590 (1961); https://doi.org/10.1021/ie50619a036
C. Bartlett, Nexus Netw. J., 16, 299 (2014); https://doi.org/10.1007/s00004-014-0193-9
H. Higashiyama, K. Yamauchi, M. Sappakittipakorn, M. Sano and O. Takahashi, Constr. Build. Mater., 40, 1021 (2013); https://doi.org/10.1016/j.conbuildmat.2012.11.078
Y. Pawar and S. Kate, Int. Res. J. Eng. Technol., 7, 1820 (2020).
X. Xian, D. Zhang and Y. Shao, J. Clean. Prod., 313, 127943 (2021); https://doi.org/10.1016/j.jclepro.2021.127943
F. Zhang, X. Xi and S. Yang, Corros. Mater. Degrad., 2, 641 (2021); https://doi.org/10.3390/cmd2040034
Y. Sumra, S. Payam and I. Zainah, J. Wuhan Univ. Technol.-Mater. Sci. Educ., 35, 908 (2020); https://doi.org/10.1007/s11595-020-2337-y
A. James, E. Bazarchi, A.A. Chiniforush, P. Panjebashi Aghdam, M.R. Hosseini, A. Akbarnezhad, I. Martek and F. Ghodoosi, Constr. Build. Mater., 224, 1026 (2019); https://doi.org/10.1016/j.conbuildmat.2019.07.250
L. Zhang, D. Niu, B. Wen and D. Luo, Materials, 12, 4245 (2019); https://doi.org/10.3390/ma12244245
Y.S. Choi, S.-T. Yi, M.Y. Kim, W.Y. Jung and E.I. Yang, Constr. Build. Mater., 54, 180 (2014); https://doi.org/10.1016/j.conbuildmat.2013.12.065
F.J. Olguin Coca, M.U. Loya Tello, C. Gaona-Tiburcio, J.A. Romero and A. Martínez-Villafañe, Int. J. Electrochem. Sci., 6, 3438 (2011).
M. Kaushal and G. Singh, Int. J. Innov. Res. Sci. Eng. Technol., 9, 11311 (2020).
A. Shakya and M.U. Rizvi, Int. Res. J. Eng. Technol., 8, 336 (2021).
J. Ress, U. Martin, J. Bosch and D.M. Bastidas, Coatings, 11, 113 (2021); https://doi.org/10.3390/coatings11020113
H.Z. López-Calvo, P. Montes-Garcia, I. Kondratova, T.W. Bremner and M.D.A. Thomas, Mater. Corros., 64, 599 (2013); https://doi.org/10.1002/maco.201106319
G.K. Al-Chaar, M. Alkadi and P.G. Asteris, Open Constr. Build. Technol. J., 7, 33 (2013); https://doi.org/10.2174/1874836801307010033
N. Sharma and P. Sharma, IOP Conf. Series Mater. Sci. Eng., 1116, 012175 (2021); https://doi.org/10.1088/1757-899X/1116/1/012175
L. Dembovska, D. Bajare, I. Pundiene and L. Vitola, Procedia Eng., 172, 202 (2017); https://doi.org/10.1016/j.proeng.2017.02.050
R.B. Polder and H. de Vries, Heron, 46, 227 (2001).
N. Gartner, T. Kosec and A. Legat, Materials, 13, 407 (2020); https://doi.org/10.3390/ma13020407
D.V. Val and M.G. Stewart, Struct. Saf., 25, 343 (2003); https://doi.org/10.1016/S0167-4730(03)00014-6
I.B. Topçu and A. Uzunömeroglu, J. Struct. Eng. Appl. Mechanics, 3, 93 (2020); https://doi.org/10.31462/jseam.2020.02093109
K.T. Kim, H.W. Kim, H.Y. Chang, B.T. Lim, H.B. Park and Y.S. Kim, Adv. Mater. Sci. Eng., 2015, 408138 (2015); https://doi.org/10.1155/2015/408138
T.D. Marcotte and C.M. Hansson, Mater. Struct., 40, 325 (2007); https://doi.org/10.1617/s11527-006-9170-4
M.A. Quraishi, D.K. Nayak, R. Kumar and V. Kumar, J. Steel Struct. Construct., 3, 1000124 (2017); https://doi.org/10.4172/2472-0437.1000124
A. Fahrizal and T. Al-Ghareeb, Mod. Concepts Mater. Sci., 4(5) (2021); https://doi.org/10.33552/MCMS.2021.04.000594
J.M. Gaidis, Cement Concr. Compos., 26, 181 (2004); https://doi.org/10.1016/S0958-9465(03)00037-4
S. Marzorati, L. Verotta and S.P. Trasatti, Molecules, 24, 48 (2018); https://doi.org/10.3390/molecules24010048
K.Y. Ann, H.S. Jung, H.S. Kim, S.S. Kim and H.Y. Moon, Cement Concr. Res., 36, 530 (2006); https://doi.org/10.1016/j.cemconres.2005.09.003
Y. Song, J. Liu, H. Wang and H. Shu, Int. J. Corros., 2019, 3060869 (2019); https://doi.org/10.1155/2019/3060869
V.L. Satish and V. Ravindra, IOP Conf. Series Mater. Sci. Eng., 1025, 012002 (2021); https://doi.org/10.1088/1757-899X/1025/1/012002
J.M. Gaidis, J.T. Lundquist and A.M. Rosenberg, Mater. Perform., 18, 36 (1979).
L. Jinsong, G. Qian, L. Jing and F. Lin, Int. J. Electrochem. Sci., 17, 22027 (2022); https://doi.org/10.20964/2022.02.35
A.M. Alshamsi and A.H. Bushlaibi, Eng. J. Univ. Qatar, 13, 97 (2000).
M. Devi, Int. J. Eng. Sci., 2, 23 (2013).
B. Sangoju, B.H. Bharatkumar, P. Srinivasan, K. Ramanjaneyulu, R. Gettu and N.R. Iyer, J. Sci. Ind. Res., 74, 82 (2015).
K.K. Sideris and A.E. Savva, Cement Concr. Compos., 27, 277 (2005); https://doi.org/10.1016/j.cemconcomp.2004.02.016
M. Afrin and P. Kuldeep, Int. J. Eng. Develop. Res., 7, 273 (2019).
J. Sørensen and L. Thorling, Geochim. Cosmochim. Acta, 55, 1289 (1991); https://doi.org/10.1016/0016-7037(91)90307-Q
R. Dharmaraj and R. Malathy, Indian J. Sci. Technol., 8, 1 (2015); https://doi.org/10.17485/ijst/2015/v8i36/87647
N.S. Teklegiorgis, B. Pradhan, J.K. Prusty and J.K. Das, J. Mater. Civ. Eng., 34, 04022007 (2022); https://doi.org/10.1061/(ASCE)MT.1943-5533.0004139
V. Madhavan and C. Antony Jeyasehar, APRN Int. J. Eng. Appl. Sci., 5, 11 (2013).
B.P. Maliekkal, J.T. Kakkassery and V.R. Palayoor, Int. J. Ind. Chem., 9, 105 (2018); https://doi.org/10.1007/s40090-018-0142-7
M. Pandiarajan, S. Rajendran, J.S. Bama and R.J. Rathish, J. Chem. Pharm. Res., 7(10S), 120 (2015).
G. Kilinççeker and N. Yesilyurt, Nat. Eng. Sci., 3, 87 (2018).
X.-P. Wang, R.-G. Du, Y.-F. Zhu, Y. Guo, W. Chen, Z.-Y. Yang, S.-G. Dong and C.-J. Lin, ECS Trans., 50, 43 (2013); https://doi.org/10.1149/05050.0043ecst
H. Hazehara, D.N. Katpady, M. Soeda, Y. Okabe and K. Era, Constr. Build. Mater., 264, 120586 (2020); https://doi.org/10.1016/j.conbuildmat.2020.120586
H.-S. Lee and S.-W. Shin, Constr. Build. Mater., 21, 1 (2007); https://doi.org/10.1016/j.conbuildmat.2006.01.004
K. Kobayashi and Y. Takagi, Cement Concr. Compos., 114, 103709 (2020); https://doi.org/10.1016/j.cemconcomp.2020.103709
H.-S. Lee, H.-S. Ryu, W.-J. Park and M.A. Ismail, Materials, 8, 251 (2015); https://doi.org/10.3390/ma8010251
V.T. Ngala, C.L. Page and M.M. Page, Corros. Sci., 45, 1523 (2003); https://doi.org/10.1016/S0010-938X(02)00248-2
C. Alonso, C. Andrade, C. Argiz and B. Malric, Cement Concr. Res., 26, 405 (1996); https://doi.org/10.1016/S0008-8846(96)85028-9
T. Chaussadent, V. Nobel-Pujol, F. Farcas, I. Mabille and C. Fiaud, Cement Concr. Res., 36, 556 (2006); https://doi.org/10.1016/j.cemconres.2005.09.006
D.M. Bastidas, M. Criado, V.M. La Iglesia, S. Fajardo, A. La Iglesia and J.M. Bastidas, Cement Concr. Compos., 43, 31 (2013); https://doi.org/10.1016/j.cemconcomp.2013.06.005
F. Tittarelli, A. Mobili and T. Bellezze, IOP Conf. Series Mater. Sci. Eng., 225, 012106 (2017); https://doi.org/10.1088/1757-899X/225/1/012106
A. Douche-Portanguen, W. Prince, B. Malric and G. Arliguie, Cement Concr. Res., 35, 1714 (2005); https://doi.org/10.1016/j.cemconres.2004.12.008
O.S.I. Fayomi, A.P.I. Popoola and O.O. Joseph, Energy Procedia, 119, 883 (2017); https://doi.org/10.1016/j.egypro.2017.07.141
O.A. Omotosho, J.O. Okeniyi and O.O. Ajayi, J. Fail. Anal. Prev., 10, 408 (2010); https://doi.org/10.1007/s11668-010-9375-2
J.O. Okeniyi, O.A. Omotosho, O.O. Ajayi and C.A. Loto, Constr. Build. Mater., 50, 448 (2014); https://doi.org/10.1016/j.conbuildmat.2013.09.063
M. Pandiarajan, S. Rajendran and R.J. Rathish, Res. J. Chem. Sci., 4, 49 (2014).
C.A. Loto, O.A. Omotosho and A.P.I. Popoola, Int. J. Phys. Sci., 6, 2275 (2011).
O.S.I. Fayomi, A.P.I. Popoola, T. Oloruntoba and A.A. Ayoola, Cogent Eng., 4, 1318736 (2017); https://doi.org/10.1080/23311916.2017.1318736
O.A. Omotosho, C.A. Loto and O.O. Ajayi, Int. J. Electrochem. Sci., 9, 2171 (2014).
S.M. Meshari, Basrah J. Sci., 30, 142 (2012).
L. Chen, D. Lu and Y. Zhang, Materials, 15, 2023 (2022); https://doi.org/10.3390/ma15062023
M. Osial and D. Wiliñski, J. Building Chem., 1, 42 (2016).
C.K. Nmai, Cement Concr. Compos., 26, 199 (2004); https://doi.org/10.1016/S0958-9465(03)00039-8
A. de Valle-Moreno, A. Torres-Acosta, M. Martínez-Madrid and J. Terán-Guillén, Superficies y Vacío, 23, 188 (2010).
Y. Tong, J. Ye, Q. Wang, H. Zhang, H. Yu and A.-O. Seibou, J. Asian Archit. Build. Eng., (2022); https://doi.org/10.1080/13467581.2022.2046004
M. Ormellese, L. Lazzari, S. Goidanich, G. Fumagalli and A. Brenna, Corros. Sci., 51, 2959 (2009); https://doi.org/10.1016/j.corsci.2009.08.018
S.K. Ahmed, W.B. Ali and A.A. Khadom, Int. J. Ind. Chem., 10, 159 (2019); https://doi.org/10.1007/s40090-019-0181-8
H.S. Ryu, C.G. Lim, T.W. Kang, S. Lim, H.T. Kim and S.H. Shin, Adv. Mater. Sci. Eng., 2019, 8294360 (2019); https://doi.org/10.1155/2019/8294360
R.K. Rai, A.S. Trivedi and M. Sharma, IOSR J. Mech. Civ. Eng., 13, 48 (2016).
T.A. Nguyen and X. Shi, Anti-Corros. Methods Mater., 56, 3 (2009); https://doi.org/10.1108/00035590910923400
G. Batis, P. Pantazopoulou and A. Routoulas, Cement Concr. Compos., 25, 371 (2003); https://doi.org/10.1016/S0958-9465(02)00061-6
F. Wombacher, U. Maeder and B. Marazzani, Cement Concr. Compos., 26, 209 (2004); https://doi.org/10.1016/S0958-9465(03)00040-4
C. Xu, W.L. Jin, H.L. Wang, H.T. Wu, N. Huang, Z.Y. Li and J.H. Mao, Constr. Build. Mater., 115, 602 (2016); https://doi.org/10.1016/j.conbuildmat.2016.04.076
K.K. Sagoe-Crentsil, V.T. Yilmaz and F.P. Glasser, Cement Concr. Res., 23, 1380 (1993); https://doi.org/10.1016/0008-8846(93)90075-K
Y.I. Kuznetsov and G.V. Redkina, Coatings, 12, 149 (2022); https://doi.org/10.3390/coatings12020149
B. Lin and Y. Zuo, RSC Adv., 9, 7065 (2019); https://doi.org/10.1039/C8RA10083G
B. Bavarian, A.O. Alaba, L. Reiner and J. Meyer, Mater. Perform., 57, 20 (2018).
H.-S. Ryu, D.-M. Kim, S.-H. Shin, W.-J. Park and S.-J. Kwon, Int. J. Concr. Struct. Mater., 12, 13 (2018); https://doi.org/10.1186/s40069-018-0243-x
Q. Xu, H. Gao, J. Zeng, C. Chen, W. Zhou, S. Wang, X. Tian and Y. Peng, Can. J. Chem. Eng., 94, 1909 (2016); https://doi.org/10.1002/cjce.22571
M. Cabrini, F. Fontana, S. Lorenzi, T. Pastore and S. Pellegrini, J. Chem., 2015, 521507 (2015); https://doi.org/10.1155/2015/521507
A.S. Fazayel, M. Khorasani and A.A. Sarabi, Appl. Surf. Sci., 441, 895 (2018); https://doi.org/10.1016/j.apsusc.2018.02.012
Y. Peng, A.E. Hughes, J.I. Mardel, G.B. Deacon, P.C. Junk, M. Forsyth, B.R.W. Hinton and A.E. Somers, ACS Appl. Mater. Interfaces, 11, 36154 (2019); https://doi.org/10.1021/acsami.9b13722
Y.P. Asmara, T. Kurniawan, A.G.E. Sutjipto and J. Jafar, Indonesian J. Sci. Technol., 3, 158 (2018); https://doi.org/10.17509/ijost.v3i2.12760
K. Kavya, S. Keerthana and T. Pradeep, Eds.: S.K. Shukla, B.B. Das, S. Chandrasekaran and S. Kolathayar, Effect of Green Corrosion Inhibitors on the Properties of Mortar and Concrete, In: Smart Technologies for Sustainable Development, Lecture Notes in Civil Engineering, Springer: Singapore, vol. 78 (2021). https://doi.org/10.1007/978-981-15-5001-0_34
B. Valdez-Salas, R. Vazquez-Delgado, J. Salvador-Carlos, E. Beltran-Partida, R. Salinas-Martinez, N. Cheng and M. Curiel-Alvarez, Materials, 14, 3326 (2021); https://doi.org/10.3390/ma14123326
M. Ben Harb, S. Abubshait, N. Etteyeb, M. Kamoun and A. Dhouib, Arab. J. Chem., 13, 4846 (2020); https://doi.org/10.1016/j.arabjc.2020.01.016
D.G. Eyu, H. Esah, C. Chukwuekezie, J. Idris and I. Mohammed, APRN J. Eng. Appl. Sci., 8, 326 (2013).
K. Subbiah, H.-S. Lee, S. Mandal and T. Park, ACS Appl. Mater. Interfaces, 13, 43676 (2021); https://doi.org/10.1021/acsami.1c11994
A. Lame (Galo), E. Kokalari (Teli) and A. Jano, Asian J. Chem., 25, 4017 (2013); https://doi.org/10.14233/ajchem.2013.13892
C. Lisha, M. Rajalingam and S. George, Int. J. Eng. Sci. Invent. Res. Develop., 3, 687 (2017).
N.K. Brixi, L. Sail and A. Bezzar, J. Adhes. Sci. Technol., 36, 1176 (2022); https://doi.org/10.1080/01694243.2021.1962090
T. Ramesh, D.S. Chauhan and M.A. Quraishi, Int. J. Corros. Scale Inhib., 10, 618 (2021); https://doi.org/10.17675/2305-6894-2021-10-2-9
I. Pradipta, D. Kong and J.T. Ban Lee, IOP Conf. Series Mater. Sci. Eng., 431, 042013 (2018); https://doi.org/10.1088/1757-899X/431/4/042013
M.A. Quraishi, V. Kumar, B.N. Singh and S.K. Singh, J. Mater. Environ. Sci., 10, 1001 (2012).
S.A. Asipita, M. Ismail, M.Z.A. Majid, Z.A. Majid, C.S. Abdullah and J. Mirza, J. Clean. Prod., 67, 139 (2014); https://doi.org/10.1016/j.jclepro.2013.12.033
C. Kennedy, F.O.P. Kpae and T.A. Nadum, Int. J. Sci. Eng. Res., 9, 1590 (2018).
Y. Cao, D. Zheng, S. Dong, F. Zhang, J. Lin, C. Wang and C. Lin, J. Electrochem. Soc., 166, C3106 (2019); https://doi.org/10.1149/2.0141911jes
V. Saraswathy, S. Muralidharan, R.M. Kalyanasundaram, K. Thangavel and S. Srinivasan, Cement Concr. Res., 31, 789 (2001); https://doi.org/10.1016/S0008-8846(01)00468-9
B. Yi, J. Wang, L. Feng, Y. Song, J. Liu and H. Shu, Adv. Civ. Eng., 2021, 6655080 (2021); https://doi.org/10.1155/2021/6655080
Z. Liu, L. Yu and Q. Li, J. Wuhan Univ. Technol.-Mater. Sci. Educ., 30, 325 (2015); https://doi.org/10.1007/s11595-015-1148-z
H.Z. Lopez-Calvo, P. Montes-Garcia, E.M. Alonso-Guzmán, W. Martinez-Molina, T.W. Bremner and M.D. Thomas, Can. J. Civ. Eng., 44, 918 (2017); https://doi.org/10.1139/cjce-2016-0237
M. A. Qi, C.A.I. Jingshun, M.U. Song, Z. Xiaocheng, L. Kai, L. Jianzhong and L. Jiaping, J. Chin. Soc. Corros. Protect., 41, 659 (2021).