Copyright (c) 2023 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Synthesis and Characterization of Nanomaterial Based Polymeric Thin Films for Agriculture with Climatic Control
Corresponding Author(s) : Aniket. S. Jadhav
Asian Journal of Chemistry,
Vol. 35 No. 1 (2023): Vol 35 Issue 1
Abstract
Agriculture production is mainly dependent upon the climate and atmospheric condition variations. A small variation in atmospheric condition has large precursion on agriculture production. Whereas daily temperature variation upto 10 can be observed in several parts of India. This variation can affect crop production adversely. Hence, formation and optimization of polycarbonate based polyhouse is investigated in this work. Further, it was observed that the materials and properties of polysheet would affect temperature and other condition of polyhouse. In current work, the material optimization was investigated and observed that an introduction of UV active nanomaterials provides better climatic control of polycarbonate based polyhouse. Applications of ZnO or TiO2 enhance the absorbance of UV rays from sunlight and resulted in large control on greenhouse environment. This helps to provide enhanced control on greenhouse conditions. The effect of presence of polycarbonate with 0.3% TiO2 50 μ showed 13.8 ºC enhancement in temperature control, which makes it highly beneficial for agriculture applications.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- S. Ali, Y. Liu, M. Ishaq, T. Shah, Abdullah, A. Ilyas and I.U. Din, Foods, 6, 39 (2017); https://doi.org/10.3390/foods6060039
- J. Gornall, R. Betts, E. Burke, R. Clark, J. Camp, K. Willett and A. Wiltshire, Philos. Trans. R Soc. Lond. B Biol. Sci., 365, 2973 (2010); https://doi.org/10.1098/rstb.2010.0158
- C.M. Godde, D. Mason-D’Croz, D.E. Mayberry, P.K. Thornton and M. Herrero, Global Food Security, 28, 100488 (2021); https://doi.org/10.1016/j.gfs.2020.100488
- B. Antony, J. Environ. Res., 202, 111624 (2021); https://doi.org/10.1016/j.envres.2021.111624
- S.G. Mahadik, M.B. Burondkar, V.J. Gimhavanekar, P.B. Vanave, V.G. Chavan and N.V. Dalvi, J. Pharmacog. Phytochem., 10, 1249 (2021).
- T. Yang, K.H.M. Siddique and K. Liu, Global Ecol. Conserv., 23, e01118 (2020); https://doi.org/10.1016/j.gecco.2020.e01118
- A.K. Vijayan, U. Surendran, V. Bujair and E.J. Joseph, Int. J. Plant Prod., 12, 107 (2018); https://doi.org/10.1007/s42106-018-0011-5
- C. Maraveas, Sustainability, 11, 6129 (2019); https://doi.org/10.3390/su11216129
- M.A. Serrano and J.C. Moreno, J. Photochem. Photobiol. B Biol., 208, 111894 (2020); https://doi.org/10.1016/j.jphotobiol.2020.111894
- Y. Yuan, J. Li, Y. Dong and H. Miao, J. Coat. Technol. Res., 17, 777 (2020); https://doi.org/10.1007/s11998-020-00329-0
- E. Moretti, M. Zinzi, E. Carnielo and F. Merli, Energy Procedia, 113, 9 (2017); https://doi.org/10.1016/j.egypro.2017.04.003
- E.G. Goh, X. Xu and P.G. Mccormick, Scripta Mater., 78-79, 49 (2014); https://doi.org/10.1016/j.scriptamat.2014.01.033
- J. Hansen, P. Kharecha, M. Sato, V. Masson-Delmotte, F. Ackerman, D.J. Beerling, P.J. Hearty, O. Hoegh-Guldberg, S.-L. Hsu, C. Parmesan, J. Rockstrom, E.J. Rohling, J. Sachs, P. Smith, K. Steffen, L. Van Susteren, K. von Schuckmann and J.C. Zachos, PLoS ONE, 8, e81648 (2013); https://doi.org/10.1371/journal.pone.0081648
- K. Morabito, N.C. Shapley, K.G. Steeley and A. Tripathi, Int. J. Cosmet. Sci., 33, 385 (2011); https://doi.org/10.1111/j.1468-2494.2011.00654.x
- F. Nucciarelli, I. Bravo, S. Catalan-Gomez, L. Vázquez, E. Lorenzo and J.L. Pau, Nanomaterials, 7, 172 (2017); https://doi.org/10.3390/nano7070172
- M. Atif, W. Farooq, A. Fatehmulla, M. Aslam and S. Ali, Materials, 8, 355 (2015); https://doi.org/10.3390/ma8010355
- A.P. Popov, J. Lademann, A.V. Priezzhev and R. Myllylä, J. Biomed. Opt., 10, 064037 (2005); https://doi.org/10.1117/1.2138017
- U.M. Nayefa, K.A. Hubeatir and J. Abdulkareem, Optik, 127, 2806 (2016); https://doi.org/10.1016/j.ijleo.2015.12.002
- P.B. Taunk, R. Das, D.P. Bisen and R.K. Tamrakar, J. Radiat. Res. Appl. Sci., 8, 433 (2015); https://doi.org/10.1016/j.jrras.2015.03.006
- N. Alabdallah and H.S. Alzahrani, Saudi J. Biol. Sci., 27, 3132 (2020); https://doi.org/10.1016/j.sjbs.2020.08.005
- M.E. Neto, D.W. Britt, L.M. Lara and A. Cartwright, Agronomy, 10, 307 (2020); https://doi.org/10.3390/agronomy10020307
- A.R. Prasad, L. Williams, J. Garvasis, K.O. Shamsheera, S.M. Basheer, M. Kuruvilla and A. Joseph, J. Mol. Liq., 331, 115805 (2021); https://doi.org/10.1016/j.molliq.2021.115805
- K.D. Halanayake, N.K. Kalutharage and J.W. Hewage, SN Appl. Sci., 3, 17 (2021); https://doi.org/10.1007/s42452-020-04100-3
- Z. Hrdlicka, A. Kuta, R. Poreba and M. Spirkova, Chem. Pap., 68, 233 (2014); https://doi.org/10.2478/s11696-013-0439-0
- L. Morales-Zamudio, T. Lozano, F. Caballero-Briones, M.A.M. Zamudio, M.E. Angeles-San Martin, P. de Lira-Gomez, G. MartinezColunga, F. Rodriguez-Gonzalez, G. Neira and S. Sanchez-Valdes, Mater. Chem. Phys., 261, 124180 (2021); https://doi.org/10.1016/j.matchemphys.2020.124180
- Y. Lyu and T.G. Choi, Int. J. Precision Eng. Manufact., 16, 213 (2015); https://doi.org/10.1007/s12541-015-0029-x
- H. Jang, J. Ha, J. Yoo, J. Pyo, K. Choi, C. Lee, T. Ryu, S. Lee and W. Kim, J. Polym. Sci., 2016, 2814529 (2016); https://doi.org/10.1155/2016/2814529
- A.B. Balaji, H. Pakalapati, M. Khalid, R. Walvekar and H. Siddiqui, Biodegradable and Biocompatible Polymer Composites Processing, Properties and Applications, Woodhead Publishing Series in Composites Science and Engineering, Elsevier, pp. 3-32 (2018).
- V.P.M. Shajudheen, K. Visawanathan, K. Anitha Rani, A. Uma Maheswari and S.S. Kumar, Int. J. Chem. Mol. Eng., 10, 556 (2016).
- E. Filippo, C. Carlucci, A.L. Capodilupo, P. Perulli, F. Conciauro, G.A. Corrente, G. Gigli and G. Ciccarella, Mater. Res., 18, 473 (2015); https://doi.org/10.1590/1516-1439.301914
- C.H. Lee, S.W. Rhee and H.W. Choi, Nanoscale Res. Lett., 7, 48 (2012); https://doi.org/10.1186/1556-276X-7-48
- M. Ojeda, B. Chen, Y.C. Leung, J. Xuan and H. Wang, Energy Procedia, 105, 3997 (2017); https://doi.org/10.1016/j.egypro.2017.03.836
- R.M. Ibrahim, M. Markom and H. Abdullah, ECS J. Solid-State Sci. Technol., 4, R31 (2015); https://doi.org/10.1149/2.0181502jss
- K. Selvam and M. Swaminathan, Arabian J. Chem., 10, S28 (2017); https://doi.org/10.1016/j.arabjc.2012.07.001
- H. Znad and Y. Kawase, J. Mol. Catal. A Chem., 314, 55 (2009); https://doi.org/10.1016/j.molcata.2009.08.017
- S. Ko, J. Pekarovic, P.D. Fleming and P. Ari-Gur, Mater. Sci. Eng. B, 166, 127 (2010); https://doi.org/10.1016/j.mseb.2009.09.023
- X.T. Zhou, H.B. Ji and X.J. Huang, Molecules, 17, 1149 (2012); https://doi.org/10.3390/molecules17021149
- A.J. Haider, Z.N. Jameel and I.H.M. Al-Hussaini, Energy Procedia, 157, 17 (2019); https://doi.org/10.1016/j.egypro.2018.11.159
- S. Vembu, S. Vijayakumar, M. Nilavukkarasi, E. Vidhya and V.N. Punitha, Sensors Int., 3, 100161 (2022); https://doi.org/10.1016/j.sintl.2022.100161
- F. Amor, M. Baudys, Z. Racova, L. Scheinherrová, L. Ingrisova and P. Hajek, Case Stud. Constr. Mater., 16, e00965 (2022); https://doi.org/10.1016/j.cscm.2022.e00965
- P. Listewnik, M. Hirsch, P. Struk, M. Weber, M. Bechelany and M. Jedrzejewska-Szczerska, J. Nanomater., 9, 306 (2019); https://doi.org/10.3390/nano9020306
References
S. Ali, Y. Liu, M. Ishaq, T. Shah, Abdullah, A. Ilyas and I.U. Din, Foods, 6, 39 (2017); https://doi.org/10.3390/foods6060039
J. Gornall, R. Betts, E. Burke, R. Clark, J. Camp, K. Willett and A. Wiltshire, Philos. Trans. R Soc. Lond. B Biol. Sci., 365, 2973 (2010); https://doi.org/10.1098/rstb.2010.0158
C.M. Godde, D. Mason-D’Croz, D.E. Mayberry, P.K. Thornton and M. Herrero, Global Food Security, 28, 100488 (2021); https://doi.org/10.1016/j.gfs.2020.100488
B. Antony, J. Environ. Res., 202, 111624 (2021); https://doi.org/10.1016/j.envres.2021.111624
S.G. Mahadik, M.B. Burondkar, V.J. Gimhavanekar, P.B. Vanave, V.G. Chavan and N.V. Dalvi, J. Pharmacog. Phytochem., 10, 1249 (2021).
T. Yang, K.H.M. Siddique and K. Liu, Global Ecol. Conserv., 23, e01118 (2020); https://doi.org/10.1016/j.gecco.2020.e01118
A.K. Vijayan, U. Surendran, V. Bujair and E.J. Joseph, Int. J. Plant Prod., 12, 107 (2018); https://doi.org/10.1007/s42106-018-0011-5
C. Maraveas, Sustainability, 11, 6129 (2019); https://doi.org/10.3390/su11216129
M.A. Serrano and J.C. Moreno, J. Photochem. Photobiol. B Biol., 208, 111894 (2020); https://doi.org/10.1016/j.jphotobiol.2020.111894
Y. Yuan, J. Li, Y. Dong and H. Miao, J. Coat. Technol. Res., 17, 777 (2020); https://doi.org/10.1007/s11998-020-00329-0
E. Moretti, M. Zinzi, E. Carnielo and F. Merli, Energy Procedia, 113, 9 (2017); https://doi.org/10.1016/j.egypro.2017.04.003
E.G. Goh, X. Xu and P.G. Mccormick, Scripta Mater., 78-79, 49 (2014); https://doi.org/10.1016/j.scriptamat.2014.01.033
J. Hansen, P. Kharecha, M. Sato, V. Masson-Delmotte, F. Ackerman, D.J. Beerling, P.J. Hearty, O. Hoegh-Guldberg, S.-L. Hsu, C. Parmesan, J. Rockstrom, E.J. Rohling, J. Sachs, P. Smith, K. Steffen, L. Van Susteren, K. von Schuckmann and J.C. Zachos, PLoS ONE, 8, e81648 (2013); https://doi.org/10.1371/journal.pone.0081648
K. Morabito, N.C. Shapley, K.G. Steeley and A. Tripathi, Int. J. Cosmet. Sci., 33, 385 (2011); https://doi.org/10.1111/j.1468-2494.2011.00654.x
F. Nucciarelli, I. Bravo, S. Catalan-Gomez, L. Vázquez, E. Lorenzo and J.L. Pau, Nanomaterials, 7, 172 (2017); https://doi.org/10.3390/nano7070172
M. Atif, W. Farooq, A. Fatehmulla, M. Aslam and S. Ali, Materials, 8, 355 (2015); https://doi.org/10.3390/ma8010355
A.P. Popov, J. Lademann, A.V. Priezzhev and R. Myllylä, J. Biomed. Opt., 10, 064037 (2005); https://doi.org/10.1117/1.2138017
U.M. Nayefa, K.A. Hubeatir and J. Abdulkareem, Optik, 127, 2806 (2016); https://doi.org/10.1016/j.ijleo.2015.12.002
P.B. Taunk, R. Das, D.P. Bisen and R.K. Tamrakar, J. Radiat. Res. Appl. Sci., 8, 433 (2015); https://doi.org/10.1016/j.jrras.2015.03.006
N. Alabdallah and H.S. Alzahrani, Saudi J. Biol. Sci., 27, 3132 (2020); https://doi.org/10.1016/j.sjbs.2020.08.005
M.E. Neto, D.W. Britt, L.M. Lara and A. Cartwright, Agronomy, 10, 307 (2020); https://doi.org/10.3390/agronomy10020307
A.R. Prasad, L. Williams, J. Garvasis, K.O. Shamsheera, S.M. Basheer, M. Kuruvilla and A. Joseph, J. Mol. Liq., 331, 115805 (2021); https://doi.org/10.1016/j.molliq.2021.115805
K.D. Halanayake, N.K. Kalutharage and J.W. Hewage, SN Appl. Sci., 3, 17 (2021); https://doi.org/10.1007/s42452-020-04100-3
Z. Hrdlicka, A. Kuta, R. Poreba and M. Spirkova, Chem. Pap., 68, 233 (2014); https://doi.org/10.2478/s11696-013-0439-0
L. Morales-Zamudio, T. Lozano, F. Caballero-Briones, M.A.M. Zamudio, M.E. Angeles-San Martin, P. de Lira-Gomez, G. MartinezColunga, F. Rodriguez-Gonzalez, G. Neira and S. Sanchez-Valdes, Mater. Chem. Phys., 261, 124180 (2021); https://doi.org/10.1016/j.matchemphys.2020.124180
Y. Lyu and T.G. Choi, Int. J. Precision Eng. Manufact., 16, 213 (2015); https://doi.org/10.1007/s12541-015-0029-x
H. Jang, J. Ha, J. Yoo, J. Pyo, K. Choi, C. Lee, T. Ryu, S. Lee and W. Kim, J. Polym. Sci., 2016, 2814529 (2016); https://doi.org/10.1155/2016/2814529
A.B. Balaji, H. Pakalapati, M. Khalid, R. Walvekar and H. Siddiqui, Biodegradable and Biocompatible Polymer Composites Processing, Properties and Applications, Woodhead Publishing Series in Composites Science and Engineering, Elsevier, pp. 3-32 (2018).
V.P.M. Shajudheen, K. Visawanathan, K. Anitha Rani, A. Uma Maheswari and S.S. Kumar, Int. J. Chem. Mol. Eng., 10, 556 (2016).
E. Filippo, C. Carlucci, A.L. Capodilupo, P. Perulli, F. Conciauro, G.A. Corrente, G. Gigli and G. Ciccarella, Mater. Res., 18, 473 (2015); https://doi.org/10.1590/1516-1439.301914
C.H. Lee, S.W. Rhee and H.W. Choi, Nanoscale Res. Lett., 7, 48 (2012); https://doi.org/10.1186/1556-276X-7-48
M. Ojeda, B. Chen, Y.C. Leung, J. Xuan and H. Wang, Energy Procedia, 105, 3997 (2017); https://doi.org/10.1016/j.egypro.2017.03.836
R.M. Ibrahim, M. Markom and H. Abdullah, ECS J. Solid-State Sci. Technol., 4, R31 (2015); https://doi.org/10.1149/2.0181502jss
K. Selvam and M. Swaminathan, Arabian J. Chem., 10, S28 (2017); https://doi.org/10.1016/j.arabjc.2012.07.001
H. Znad and Y. Kawase, J. Mol. Catal. A Chem., 314, 55 (2009); https://doi.org/10.1016/j.molcata.2009.08.017
S. Ko, J. Pekarovic, P.D. Fleming and P. Ari-Gur, Mater. Sci. Eng. B, 166, 127 (2010); https://doi.org/10.1016/j.mseb.2009.09.023
X.T. Zhou, H.B. Ji and X.J. Huang, Molecules, 17, 1149 (2012); https://doi.org/10.3390/molecules17021149
A.J. Haider, Z.N. Jameel and I.H.M. Al-Hussaini, Energy Procedia, 157, 17 (2019); https://doi.org/10.1016/j.egypro.2018.11.159
S. Vembu, S. Vijayakumar, M. Nilavukkarasi, E. Vidhya and V.N. Punitha, Sensors Int., 3, 100161 (2022); https://doi.org/10.1016/j.sintl.2022.100161
F. Amor, M. Baudys, Z. Racova, L. Scheinherrová, L. Ingrisova and P. Hajek, Case Stud. Constr. Mater., 16, e00965 (2022); https://doi.org/10.1016/j.cscm.2022.e00965
P. Listewnik, M. Hirsch, P. Struk, M. Weber, M. Bechelany and M. Jedrzejewska-Szczerska, J. Nanomater., 9, 306 (2019); https://doi.org/10.3390/nano9020306