Issue

Vol. 34 No. 3 (2022): Vol 34 Issue 3, 2022

Copyright (c) 2022 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Recent Developments in Textile Reinforced Polymer Composites: A Review

https://doi.org/10.14233/ajchem.2022.23504%20
R.M.N. Sulochani
Department of Bio Systems Technology, Faculty of Technology, University of Sri Jayewardenepura, Nugegoda, Sri Lanka
R.A. Jayasinghe
Department of Civil and Environmental Technology, Faculty of Technology, University of Sri Jayewardenepura, Nugegoda, Sri Lanka
A.H.L.R. Nilmini
Department of Material and Mechanical Technology, Faculty of Technology, University of Sri Jayewardenepura, Nugegoda, Sri Lanka
Gayan Priyadarshana
Department of Material and Mechanical Technology, Faculty of Technology, University of Sri Jayewardenepura, Nugegoda, Sri Lanka

Corresponding Author(s) : R.A. Jayasinghe

randika@sjp.ac.lk

Asian Journal of Chemistry, Vol. 34 No. 3 (2022): Vol 34 Issue 3, 2022

Abstract

This article provides an overview of using textile materials as reinforcement in polymer composites. A considerable amount of research studies on this topic have been conducted to date. The different types of textile materials and polymer matrices used in composite development have been discussed. The fabrication techniques used in the development of composites, the properties, testing methods and the specific standards have been critically reviewed. Furthermore, the suitable applications of textile reinforced polymer composites are reviewed. This review highlights the potential of textile materials in polymer matrices as reinforcement for various applications, including automotive, aeronautical, defence, construction industries, etc.

Keywords

Textile Textile Polymer composites Polymer composites Mechanical properties Mechanical properties Applications Applications
Sulochani, R., Jayasinghe, R., Nilmini, A., & Priyadarshana, G. (2022). Recent Developments in Textile Reinforced Polymer Composites: A Review. Asian Journal of Chemistry, 34(3), 487–496. https://doi.org/10.14233/ajchem.2022.23504
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. F.C. Campbell, eds.: A. Britton, Introduction to Composite Materials, In: Structural Composite Materials, ASM International, USA, Ed.: 1, pp. 1-29 (2010).
  2. S.K. Parmar and P.A. Khatwani, Int. J. Eng. Res. Appl., 10, 21 (2020); https://doi.org/10.9790/9622 1005042125
  3. A.K. Sharma, R. Bhandari, A. Aherwar and R. Rimasauskiene, Mater. Today: Proc., 21, 1559 (2019); https://doi.org/10.1016/j.matpr.2019.11.086
  4. R.K. Malviya, R.K. Singh, R. Purohit and R. Sinha, Mater. Today Proc., 26, 3157 (2020); https://doi.org/10.1016/j.matpr.2020.02.651
  5. V. Khatkar, B.K. Behera and R.N. Manjunath, Composites B Eng., 182, 107662 (2020); https://doi.org/10.1016/j.compositesb.2019.107662
  6. Z.T. Kier, A. Salvi, G. Theis, A.M. Waas and K. Shahwan, Composites B Eng., 68, 288 (2015); https://doi.org/10.1016/j.compositesb.2014.08.039
  7. B.K. Kandola, S.I. Mistik, W. Pornwannachai and S.C. Anand, Composites B Eng., 153, 456 (2018); https://doi.org/10.1016/j.compositesb.2018.09.013
  8. S.H. Kim and C.H. Park, Ind. Crops Prod., 95, 651 (2017); https://doi.org/10.1016/j.indcrop.2016.11.034
  9. M.I. Misnon, M.M. Islam, J.A. Epaarachchi and K. Lau, Mater. Des., 59, 359 (2014); https://doi.org/10.1016/j.matdes.2014.03.022
  10. Y.S. Song, J.T. Lee, D.S. Ji, M.W. Kim, S.H. Lee and J.R. Youn, Composites B Eng., 43, 856 (2012); https://doi.org/10.1016/j.compositesb.2011.10.021
  11. J. Arputhabalan, K. Palanikumar, S.R. Adaikalaraj and M.S. Priyan, Mater. Today Proc., 16, 843 (2019); https://doi.org/10.1016/j.matpr.2019.05.167
  12. D.K. Rajak, D.D. Pagar, P.L. Menezes and E. Linul, Polymers, 11, 1667 (2019); https://doi.org/10.3390/polym11101667.
  13. E. MacArthur Foundation, A New Textiles Economy: Redesigning Fashion’s Future (2017); Retrieved from http://www.ellenmacarthurfoundation.org/publications
  14. R. Mishra, B.K. Behera and J. Militky, J. Textil. Inst., 105, 460 (2013); https://doi.org/10.1080/00405000.2013.820865
  15. C. Baillie and R. Jayasinghe, Green Composites: Waste and Nature-based Materials for a Sustainable Future: In Green Composites: Waste and Nature-based Materials for a Sustainable Future, Elsevier (2017).
  16. M.S. Bodur, M. Bakkal and H.E. Sonmez, Polym. Eng. Sci., 58, 1082 (2017); https://doi.org/10.1002/pen.24670
  17. S. Turki, S. Ben Abdallah and S. Ben Abdessalem, J. Textil. Inst., 109, 1315 (2018); https://doi.org/10.1080/00405000.2018.1423897
  18. L. Conzatti, F. Giunco, P. Stagnaro, M. Capobianco, M. Castellano and E. Marsano, Composites A Appl. Sci. Manuf., 43, 1113 (2012); https://doi.org/10.1016/j.compositesa.2012.02.019
  19. F.A. Barros, J.M. Gamboa, G.A. Díaz-Ramírez, O.A. González-Estrada and R.A. Cruz, J. Phys. Conf. Ser., 1247, 012001 (2019); https://doi.org/10.1088/1742-6596/1247/1/012001
  20. O.A. González-Estrada, G. Díaz and J.E. Quiroga Mendez, Key Eng. Mater., 774, 143 (2018); https://doi.org/10.4028/www.scientific.net/KEM.774.143
  21. Z.E. Cherif, C. Poilâne, A. Vivet, B. Ben Doudou and J. Chen, Compos. Struct., 140, 240 (2016); https://doi.org/10.1016/j.compstruct.2015.12.030
  22. H. Ishikawa, H. Takagi, A.N. Nakagaito, M. Yasuzawa, H. Genta and H. Saito, Compos. Interfaces, 21, 329 (2014); https://doi.org/10.1080/15685543.2013.876322
  23. S. Kobayashi, K. Takada and R. Nakamura, Composites A Appl. Sci. Manuf., 59, 1 (2014); https://doi.org/10.1016/j.compositesa.2013.12.009
  24. H. Özdemir and B.M. Içten, J. Text. Inst., 109, 133 (2018); https://doi.org/10.1080/00405000.2017.1333719
  25. M.M. Kabir, H. Wang, K.T. Lau, F. Cardona and T. Aravinthan, Composites B Eng., 43, 159 (2012); https://doi.org/10.1016/j.compositesb.2011.06.003
  26. L. Yan, N. Chouw and K. Jayaraman, Fibers Polym., 15, 1270 (2014); https://doi.org/10.1007/s12221 014-1270-0
  27. O. Faruk, A.K. Bledzki, H.-P. Fink and M. Sain, Prog. Polym. Sci., 37, 1552 (2012); https://doi.org/10.1016/j.progpolymsci.2012.04.003
  28. S.A. Miller, J. Clean. Prod., 198, 612 (2018); https://doi.org/10.1016/j.jclepro.2018.07.038
  29. M. Verma, Int. J. Chem. Stud., 8, 1489 (2020); https://doi.org/10.22271/chemi.2020.v8.i1u.8464
  30. T. Sen and H.N.J. Reddy, Int. J. Sustain. Built Environ., 2, 41 (2013); https://doi.org/10.1016/j.ijsbe.2013.11.001
  31. A. Elmahdy and P. Verleysen, Polym. Test., 81, 106224 (2020); https://doi.org/10.1016/j.polymertesting.2019.106224
  32. N.M. Aly, M.A. Saad, E.H. Sherazy, O.M. Kobesy and A.A. Almetwally, J. Ind. Text., 42, 204 (2013); https://doi.org/10.1177/1528083711433912
  33. P. Samyn and L. Zsidai, Polym. Plast. Technol. Eng., 56, 1003 (2017); https://doi.org/10.1080/03602559.2016.1247281
  34. D. Mecit and A. Marmaral, Usak Univ. J. Mater. Sci., 1, 71 (2012).
  35. S. Jacob, K.K. Suma, J.M. Mendez and K.E. George, Solid-State Mater. Adv. Technol., 168, 245 (2010); https://doi.org/10.1016/j.mseb.2009.11.025
  36. W. Smitthipong, S. Suethao, D. Shah and F. Vollrath, Polym. Test., 55, 17 (2016); https://doi.org/10.1016/j.polymertesting.2016.08.007
  37. D.G.K. Dissanayake, D.U. Weerasinghe, K.A.P. Wijesinghe and K.M.D.M.P. Kalpage, Waste Manag., 79, 356 (2018); https://doi.org/10.1016/j.wasman.2018.08.001
  38. S.D. Tohidi, A.M. Rocha, B. Engesser, N.V. Dencheva and Z. Denchev, Compos. Struct., 225, 111088 (2019); https://doi.org/10.1016/j.compstruct.2019.111088
  39. I. Ia, O. Vasile and R. Iatan, U.P.B. Sci. Bull., 78, 213 (2016).
  40. R. Mishra, B. Behera and J. Militky, Polym. Compos., 35, 1960 (2014); https://doi.org/10.1002/pc.22855
  41. M. Umar, K. Shaker, S. Ahmad, Y. Nawab, M. Umair and M. Maqsood, J. Textil. Inst., 108, 835 (2016); https://doi.org/10.1080/00405000.2016.1193982
  42. M.S. Bodur, M. Bakkal and K. Englund, J. Compos. Mater., 51, 3257 (2017); https://doi.org/10.1177/0021998316685897
  43. M.S. Bodur, M. Bakkal and H.E. Sonmez, J. Compos. Mater., 50, 3817 (2016); https://doi.org/10.1177/0021998315626256
  44. C. Rubino, M. Bonet Aracil, J. Gisbert-Payá, S. Liuzzi, P. Stefanizzi, M. Zamorano Cantó and F. Martellotta, Materials, 12, 4020 (2019); https://doi.org/10.3390/ma12234020
  45. C.A. Echeverria, W. Handoko, F. Pahlevani and V. Sahajwalla, J. Clean. Prod., 208, 1524 (2018); https://doi.org/10.1016/j.jclepro.2018.10.227
  46. M.S. Bodur, K. Englund and M. Bakkal, J. Appl. Polym. Sci., 134, 45506 (2017); https://doi.org/10.1002/app.45506
  47. K.V. Arun, S. Basavarajappa and B.S. Sherigara, Mater. Des., 31, 930 (2010); https://doi.org/10.1016/j.matdes.2009.07.029
  48. M.S. Bodur, M. Bakkal, M. Savas and O.B. Berkalp, J. Polym. Eng., 34, 639 (2014); https://doi.org/10.1515/polyeng-2013-0281
  49. T.E. Hamouda, A.H. Hassanin, N. Saba, M. Demirelli, A. Kilic, Z. Candan and M. Jawaid, J. Polym. Environ., 27, 489 (2019); https://doi.org/10.1007/s10924-019-01369-3
  50. H. Singh, N.K. Batra and I. Dikshit, Mater. Today Proc., 38, 29 (2021); https://doi.org/10.1016/j.matpr.2020.05.520
  51. Z. Kamble and B.K. Behera, J. Eng. Fibers Fabrics, 15, 1 (2020); https://doi.org/10.1177/1558925020901530
  52. R. Muthuraj, C. Lacoste, P. Lacroix and A. Bergeret, Ind. Crops Prod., 135, 238 (2019); https://doi.org/10.1016/j.indcrop.2019.04.053
  53. M.A. Al Faruque, R. Remadevi, J. Razal, X. Wang and M. Naebe, J. Appl. Polym. Sci., 136, 1 (2019); https://doi.org/10.1002/app.48370
  54. W. Post, A. Susa, R. Blaauw, K. Molenveld and R.J.I. Knoop, Polym. Rev., 60, 359 (2020); https://doi.org/10.1080/15583724.2019.1673406
  55. M. Bakkal, M.S. Bodur, O.B. Berkalp and S. Yilmaz, J. Mater. Process. Technol., 212, 2541 (2012); https://doi.org/10.1016/j.jmatprotec.2012.03.008
  56. P.S. Souza, E.F. Rodrigues, J.M.C. Prêta, S.A.S. Goulart and D.R. Mulinari, Procedia Eng., 10, 2040 (2011); https://doi.org/10.1016/j.proeng.2011.04.338
  57. H. Ma and C.W. Joo, J. Compos. Mater., 45, 1451 (2010); https://doi.org/10.1177/0021998310382316
  58. R. Muthuraj, M. Misra and A. Mohanty, J. Polym. Environ., 22, 336 (2014); https://doi.org/10.1007/s10924-013-0636-5
  59. S.D. Tohidi, N. Dencheva, Z. Denchev, A.M. Rocha and B. Engesser, Mater. Today Commun., 23, 100912 (2020); https://doi.org/10.1016/j.mtcomm.2020.100912
  60. A.T. Michel and S.L. Billington, Polym. Degrad. Stab., 97, 870 (2012); https://doi.org/10.1016/j.polymdegradstab.2012.03.040
  61. S.K. Ramamoorthy, A. Persson and M. Skrifvars, J. Appl. Polym. Sci., 131, 1 (2014); https://doi.org/10.1002/app.40687
  62. N.A. Kalebek and O. Babaarslan, Fiber Selection for the Production of Nonwovens, In: Non-Woven Fabrics, IntechOpen, pp. 1-32 (2016).
  63. M. Balasubramanian, Eds.: S. Rana and R. Fangueiro, Introduction to Composite Materials, In: Fibrous and Textile Materials for Composite Applications, Springer, Singapore, Ed.: 1, pp. 1-39 (2016).
  64. J.C. Velosa, S. Rana, R. Fangueiro, F.W.J. Van Hattum, F. Soutinho and S. Marques, J. Reinf. Plast. Compos., 31, 95 (2012); https://doi.org/10.1177/0731684411431354
  65. W. Baccouch, A. Ghith, Y. Yalcin-Enis, H. Sezgin, W. Miled, X. Legrand and F. Faten, J. Ind. Textil., 51, 876 (2020); https://doi.org/10.1177/1528083720901864
  66. L.C.C. Demosthenes, L.F.C. Nascimento, S.N. Monteiro, U.O. Costa, F.C. Garcia-Filho, F.S. Luz, M.S. Oliveira, F.J.H.T.V. Ramos, A.C. Pereira and F.O. Braga, J. Mater. Res. Technol., 9, 115 (2020); https://doi.org/10.1016/j.jmrt.2019.10.036
  67. S. Tejyan, T. Singh, A. Patnaik, G. Fekete and B. Gangil, J. Ind. Text., 49, 447 (2018); https://doi.org/10.1177/1528083718787524
  68. Y. Dong, X. Yao, H. Yan, L. Yuan and H. Yang, Compos. Struct., 230, 111510 (2019); https://doi.org/10.1016/j.compstruct.2019.111510
  69. N.M. Barkoula, S.K. Garkhail and T. Peijs, Ind. Crops Prod., 31, 34 (2010); https://doi.org/10.1016/j.indcrop.2009.08.005
  70. J. Carruthers, Vacuum Bagging Process Overview (2018); Available online: https://coventivecomposites.com/explainers/what-is-vacuum-bagging/ (accessed on 13 July 2019).
  71. B.A. Muralidhar, Mater. Des., 52, 835 (2013); https://doi.org/10.1016/j.matdes.2013.06.020
  72. B.A. Muralidhar, J. Reinf. Plast. Compos., 32, 207 (2015); https://doi.org/10.1177/0731684412469136
  73. M. Elkington, D. Bloom, C. Ward, A. Chatzimichali and K. Potter, Adv. Manuf. Polym. Compos. Sci., 1, 138 (2015); https://doi.org/10.1080/20550340.2015.1114801
  74. S.G. Bajwa, D.S. Bajwa, G. Holt, T. Coffelt and F. Nakayama, Ind. Crops Prod., 33, 747 (2011); https://doi.org/10.1016/j.indcrop.2011.01.017
  75. A. Porras, A. Maranon and I.A. Ashcroft, Composites A Appl. Sci. Manuf., 81, 105 (2016); https://doi.org/10.1016/j.compositesa.2015.11.008
  76. M. Hyvärinen, R. Jabeen and T. Kärki, Polymers, 12, 1306 (2020); https://doi.org/10.3390/polym12061306
  77. C.J.G. Plummer, P.E. Bourban and J.A. Månson, Polymer matrix Composites: Matrices and Processing, Ref. Modul. Mater. Sci. Mater. Eng., (2016); https://doi.org/10.1016/B978-0-12-803581-8.02386-9
  78. A.Q. Dayo, A.A. Babar, Q. Qin, S. Kiran, J. Wang, A.H. Shah, A. Zegaoui, H.A. Ghouti and W. Liu, Composites A Appl. Sci. Manuf., 128, 105653 (2020); https://doi.org/10.1016/j.compositesa.2019.105653
  79. S.D. Tohidi, Z.Z. Denchev, A.M. Rocha, N.V. Dencheva, B. Engesser and A.S. Pouzada, Polym. Test., 79, 106017 (2019); https://doi.org/10.1016/j.polymertesting.2019.106017
  80. J. Zhang, A.A. Khatibi, E. Castanet, T. Baum, Z. Komeily-Nia, P. Vroman and X. Wang, Compos. Commun., 13, 12 (2019); https://doi.org/10.1016/j.coco.2019.02.002
  81. V.P. Matveenko, N.A. Kosheleva, I.N. Shardakov and A. Voronkov, Int. J. Smart Nano Mater., 9, 99 (2018); https://doi.org/10.1080/19475411.2018.1450791
  82. M. Tasdemir, D. Kocak, N. Merdan, I. Usta and M. Akalin, Fen Bilimleri Dergisi, 4, 157 (2013); https://doi.org/10.7240/MJS.2013254094
  83. L. Conzatti, F. Giunco, P. Stagnaro, A. Patrucco, C. Marano, M. Rink and E. Marsano, Composites A Appl. Sci. Manuf., 47, 165 (2013); https://doi.org/10.1016/j.compositesa.2013.01.002
  84. S.J. Christian and S.L. Billington, Composites B Eng., 43, 2303 (2012); https://doi.org/10.1016/j.compositesb.2011.11.063
  85. G. George, E.T. Jose, K. Jayanarayanan, E.R. Nagarajan, M. Skrifvars and K. Joseph, Composites A Appl. Sci. Manuf., 43, 219 (2012); https://doi.org/10.1016/j.compositesa.2011.10.011
  86. S.D. Tohidi, Z. Denchev, N.V. Dencheva, A.M. Rocha, L.A. Rosa and B. Engesser, Mater. Today Commun., 24, 101068 (2020); https://doi.org/10.1016/j.mtcomm.2020.101068
  87. P. Samyn, J. Compos. Mater., 51, 221 (2016); https://doi.org/10.1177/0021998316642830
  88. X. Zhao, W. Chen, X. Han, Y. Zhao and S. Du, Compos. Sci. Technol., 191, 108094 (2020); https://doi.org/10.1016/j.compscitech.2020.108094
  89. Q. Lu, L. Sun, Z. Yang, X. Li and S. Jin, Composites A Appl. Sci. Manuf., 41, 997 (2010); https://doi.org/10.1016/j.compositesa.2010.04.005
  90. D.U. Shah, D. Porter and F. Vollrath, Compos. Sci. Technol., 101, 173 (2014); https://doi.org/10.1016/j.compscitech.2014.07.015
  91. M. Assarar, D. Scida, A. El Mahi, C. Poilâne and R. Ayad, Mater. Des., 32, 788 (2011); https://doi.org/10.1016/j.matdes.2010.07.024
  92. M. Jawaid, H.P.S. Abdul Khalil, A. Hassan, R. Dungani and A. Hadiyane, Composites B Eng., 45, 619 (2013); https://doi.org/10.1016/j.compositesb.2012.04.068
  93. B. Murali, B.V. Ramnath and D. Chandramohan, Mater. Today Proc., 16, 883 (2019); https://doi.org/10.1016/j.matpr.2019.05.173
  94. K. Ramraji, K. Rajkumar, M. Dhananchezian and P. Sabarinathan, Mater. Today Proc., 22, 1351 (2020); https://doi.org/10.1016/j.matpr.2020.01.428
  95. S.D. Tohidi, A.M. Rocha, N.V. Dencheva and Z. Denchev, Composites A Appl. Sci. Manuf., 109, 171 (2018); https://doi.org/10.1016/j.compositesa.2018.03.003
  96. J.H. Eun, D.H. Kim and J.S. Lee, Composites A Appl. Sci. Manuf., 137, 105987 (2020); https://doi.org/10.1016/j.compositesa.2020.105987
  97. H. Binici, M. Eken, M. Dolaz, O. Aksogan and M. Kara, Constr. Build. Mater., 51, 24 (2014); https://doi.org/10.1016/j.conbuildmat.2013.10.038
  98. S. Kannan, R.J. Bright and A.J. Moses, Mater. Today Proc., 33, 798 (2020); https://doi.org/10.1016/j.matpr.2020.06.259
  99. D. Logendran, D. Muruganandam, S.K. Dinesh Kumar, A.A.E. Andrews, P. Karthick and R. Pradhan, Mater. Today Proc., 33, 2803 (2020); https://doi.org/10.1016/j.matpr.2020.02.687
  100. C. Rubino, M. Bonet Aracil, S. Liuzzi, P. Stefanizzi and F. Martellotta, J. Clean. Prod., 278, 123905 (2021); https://doi.org/10.1016/j.jclepro.2020.123905
  101. S. Sharma, P. Sudhakara, S.K. Misra and J. Singh, Mater. Today: Proc., 33, 1671 (2020); https://doi.org/10.1016/j.matpr.2020.06.523
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 0 Download : 0