Copyright (c) 2022 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Admicellar Polymerization of Tris(2-acryloyloxyethyl)phosphate on Cotton Fabric for Flame Retardant Finishing
Corresponding Author(s) : J.B. Dahiya
Asian Journal of Chemistry,
Vol. 34 No. 10 (2022): Vol 34 Issue 10, 2022
Abstract
To improve the flame retardant property, the admicellar polymerization process was applied to polymerize and coat the tris(2-acryl-oyloxyethyl)phosphate (PTAP) monomer on cotton fabric (CF). The polymerization was completed with the support of a cationic surfactant cetyltrimethylammonium bromide (CTAB) and an initiator 2,2′-azobisisobutyronitrile (AIBN). Thermogravimetric analysis (TGA) and limiting oxygen index test (LOI) were performed to find out the effects on degradation and flammability of modified cotton fabric. One of the modified cotton fabric samples (CF-PTAP) show the decrease in onset temperature caused by acid catalyzed dehydration released from PTAP polymer placed on cotton fabric substrate. The increase in char yield (20.9%) and LOI value (25.0% demonstrated a condensed phase flame retardant action) owing to the presence of PTAP polymer on substrate.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- P. Zhu, S. Sui, B. Wang, K. Sun and G. Sun, J. Anal. Appl. Pyrolysis, 71, 645 (2004); https://doi.org/10.1016/j.jaap.2003.09.005
- M. Przybylak, M. Dutkiewicz, K. Szubert, H. Maciejewski and S. Rojewski, Materials, 14, 1542 (2021); https://doi.org/10.3390/ma14061542
- M.C. Silva-Santos, M.S. Oliveira, A.M. Giacomin, M.C. Laktim and J. Baruque-Ramosa, Procedia Eng., 200, 148 (2017); https://doi.org/10.1016/j.proeng.2017.07.022
- C.D. Papaspyrides, S. Pavlidou and S.N. Vouyiouka, Proc. Inst. Mechan. Eng., Part L: J. Mater. Design Appl., 223, 91 (2009); https://doi.org/10.1243/14644207JMDA2
- K.N. Ulman and S.R. Shukla, Adv. Polym. Technol., 35, 21556 (2016); https://doi.org/10.1002/adv.21556
- S. Tragoonwichian, E.A. O’Rear and N. Yanumet, Colloids Surf. A, 349, 170 (2009); https://doi.org/10.1016/j.colsurfa.2009.08.014
- O.M. Matarredona, K. Mach, M.M. Rieger and E.A. O’Rear, Corros. Sci., 45, 2541 (2003); https://doi.org/10.1016/S0010-938X(03)00084-2
- T. Pongprayoon, N. Yanumet and E.A. O’Rear, J. Colloid Interface Sci., 249, 227 (2002); https://doi.org/10.1006/jcis.2002.8230
- S.S. Sakhalkar and D.E. Hirt, Langmuir, 11, 3369 (1995); https://doi.org/10.1021/la00009a017
- C. Lai, J.H. Harwell, E.A. O’Rear, S. Komatsuzaki, J. Arai, T. Nakakawaji and Y. Ito, Langmuir, 11, 905 (1995); https://doi.org/10.1021/la00003a038
- A. Siriviriyanun, E.A. O’Rear and N. Yanumet, J. Appl. Polym. Sci., 103, 4059 (2007); https://doi.org/10.1002/app.25451
- S. Nehra, S. Hanumansetty, E.A. O’Rear and J.B. Dahiya, Polym. Degrad. Stab., 109, 137 (2014); https://doi.org/10.1016/j.polymdegradstab.2014.07.002
- J.A. Choi, Y. Kang, H. Shim, D.W. Kim, H.K. Song and D.W. Kim, J. Power Sources, 189, 809 (2009); https://doi.org/10.1016/j.jpowsour.2008.07.048
- A. Siriviriyanun, E.A. O’Rear and N. Yanumet, J. Appl. Polym. Sci., 109, 3859 (2008); https://doi.org/10.1002/app.28614
- Shubha and J.B. Dahiya, Indian J. Fibre Text. Res., 43, 457 (2018).
- A.M. Olsson and L. Salmen, Carbohydr. Res., 339, 813 (2004); https://doi.org/10.1016/j.carres.2004.01.005
- C. Chung, M. Lee and E.K. Choe, Carbohydr. Polym., 58, 417 (2004); https://doi.org/10.1016/j.carbpol.2004.08.005
- J.B. Dahiya and S. Rana, Polym. Int., 53, 995 (2004); https://doi.org/10.1002/pi.1500
References
P. Zhu, S. Sui, B. Wang, K. Sun and G. Sun, J. Anal. Appl. Pyrolysis, 71, 645 (2004); https://doi.org/10.1016/j.jaap.2003.09.005
M. Przybylak, M. Dutkiewicz, K. Szubert, H. Maciejewski and S. Rojewski, Materials, 14, 1542 (2021); https://doi.org/10.3390/ma14061542
M.C. Silva-Santos, M.S. Oliveira, A.M. Giacomin, M.C. Laktim and J. Baruque-Ramosa, Procedia Eng., 200, 148 (2017); https://doi.org/10.1016/j.proeng.2017.07.022
C.D. Papaspyrides, S. Pavlidou and S.N. Vouyiouka, Proc. Inst. Mechan. Eng., Part L: J. Mater. Design Appl., 223, 91 (2009); https://doi.org/10.1243/14644207JMDA2
K.N. Ulman and S.R. Shukla, Adv. Polym. Technol., 35, 21556 (2016); https://doi.org/10.1002/adv.21556
S. Tragoonwichian, E.A. O’Rear and N. Yanumet, Colloids Surf. A, 349, 170 (2009); https://doi.org/10.1016/j.colsurfa.2009.08.014
O.M. Matarredona, K. Mach, M.M. Rieger and E.A. O’Rear, Corros. Sci., 45, 2541 (2003); https://doi.org/10.1016/S0010-938X(03)00084-2
T. Pongprayoon, N. Yanumet and E.A. O’Rear, J. Colloid Interface Sci., 249, 227 (2002); https://doi.org/10.1006/jcis.2002.8230
S.S. Sakhalkar and D.E. Hirt, Langmuir, 11, 3369 (1995); https://doi.org/10.1021/la00009a017
C. Lai, J.H. Harwell, E.A. O’Rear, S. Komatsuzaki, J. Arai, T. Nakakawaji and Y. Ito, Langmuir, 11, 905 (1995); https://doi.org/10.1021/la00003a038
A. Siriviriyanun, E.A. O’Rear and N. Yanumet, J. Appl. Polym. Sci., 103, 4059 (2007); https://doi.org/10.1002/app.25451
S. Nehra, S. Hanumansetty, E.A. O’Rear and J.B. Dahiya, Polym. Degrad. Stab., 109, 137 (2014); https://doi.org/10.1016/j.polymdegradstab.2014.07.002
J.A. Choi, Y. Kang, H. Shim, D.W. Kim, H.K. Song and D.W. Kim, J. Power Sources, 189, 809 (2009); https://doi.org/10.1016/j.jpowsour.2008.07.048
A. Siriviriyanun, E.A. O’Rear and N. Yanumet, J. Appl. Polym. Sci., 109, 3859 (2008); https://doi.org/10.1002/app.28614
Shubha and J.B. Dahiya, Indian J. Fibre Text. Res., 43, 457 (2018).
A.M. Olsson and L. Salmen, Carbohydr. Res., 339, 813 (2004); https://doi.org/10.1016/j.carres.2004.01.005
C. Chung, M. Lee and E.K. Choe, Carbohydr. Polym., 58, 417 (2004); https://doi.org/10.1016/j.carbpol.2004.08.005
J.B. Dahiya and S. Rana, Polym. Int., 53, 995 (2004); https://doi.org/10.1002/pi.1500