Copyright (c) 2020 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Microflower like Zinc Oxide/Cerium, Lanthanum Substituted Hydroxyapatite Bilayer Coating on Surgical Grade Stainless Steel for Corrosion Resistance, Antibacterial and Bioactive Properties
Corresponding Author(s) : S. Sathishkumar
Asian Journal of Chemistry,
Vol. 32 No. 4 (2020): Vol 32 Issue 4, 2020
Abstract
The growing evidence of beneficial role of zinc in bone has increased the interest of developing zinc-containing biomaterials for medical applications and specifically biocompatible coatings that can be deposited on metallic implants to benefit from their load-bearing capabilities. In present work, zinc oxide/cerium, lanthanum substituted (ZnO/Ce,La-HAP) hydroxyapatite bilayer coatings have been fabricated by electrodeposition technique. As developed, ZnO/Ce,La-HAP bilayer coatings were then structurally, morphologically and chemically characterized using Fourier-transform infrared spectroscopy(FT-IR), X-ray diffraction (XRD), higher resolution scanning electron microscopy (HRSEM) and energy dispersive X-ray spectroscopy (EDAX). The properties of corrosion performance of 316L SS were explored in Ringers solution using electrochemical analysis. The potentiodynamic polarization and impedance analysis demonstrated that the anticorrosion behavior of 316L SS was significantly increased by the bilayer coating. Cell viability in vitro, antibacterial activity and live/dead assay of ZnO/Ce,La-HAP bilayer coating were investigated. Hence, development of ZnO/Ce,La-HAP bilayer coating on 316L SS to make it suitable for biomedical applications.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- F.G. Correa, J.V. Granados, M.J. Reyes and L. A. Q. Granados, J. Chem., 2013, 751696 (2013); https://doi.org/10.1155/2013/751696
- A.G. Mikos, S.W. Herring, P. Ochareon, J. Elisseeff, H.H. Lu, R. Kandel, F.J. Schoen, M. Toner, D. Mooney, A. Atala, M.E.V. Dyke, D. Kaplan and G. Vunjak-Novakovic, Tissue Eng., 12, 3307 (2006); https://doi.org/10.1089/ten.2006.12.3307
- L.C. Lucas, L.J. Bearden and J.E. Lemons, eds.: A.C. Fraker and C.D. Griffin, Second Symposium, American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 208 (1985).
- Y. Tang, S. Katsuma, S. Fujimoto and S. Hiromoto, Acta Biomater., 2, 709 (2006); https://doi.org/10.1016/j.actbio.2006.06.003
- T. Tuken, Surf. Coat. Technol., 200, 4713 (2006); https://doi.org/10.1016/j.surfcoat.2005.04.011
- E. De Las Heras, D.A. Egidi, P. Corengia, D. González-Santamaría, A. García-Luis, M. Brizuela, G.A. López and M.F. Martinez, Surf. Coat. Technol., 202, 2945 (2008); https://doi.org/10.1016/j.surfcoat.2007.10.037
- Y. Okazaki, E. Gotoh, T. Manabe and K. Kobayashi, Biomaterials, 25, 5913 (2004); https://doi.org/10.1016/j.biomaterials.2004.01.064
- M.K. Lei and X.M. Zhu, Biomaterials, 22, 641 (2001); https://doi.org/10.1016/S0142-9612(00)00226-X
- D.G. Wang, C.Z. Chen, J. Ma and G. Zhang, Colloids Surf. B Biointerfaces, 66, 155 (2008); https://doi.org/10.1016/j.colsurfb.2008.06.003
- F. Bir, H. Khireddine, A. Touati, D. Sidane, S. Yala and H. Oudadesse, Appl. Surf. Sci., 258, 7021 (2012); https://doi.org/10.1016/j.apsusc.2012.03.158
- M. Chozhanathmisra, D. Govindaraj, P. Karthikeyan, K. Pandian, L. Mitu and R. Rajavel, J. Chem., 2018, 9813827 (2018); https://doi.org/10.1155/2018/9813827
- Y.W. Song, D.Y. Shan and E.H. Han, Mater. Lett., 62, 3276 (2008); https://doi.org/10.1016/j.matlet.2008.02.048
- Y. Han, T. Fu, J. Lu and K.W. Xu, J. Biomed. Mater. Res., 54, 96 (2001); https://doi.org/10.1002/1097-4636(200101)54:1<96::AIDJBM11>3.0.CO;2-U
- D.Y. Lin and X.X. Wang, Ceram. Int., 37, 403 (2011); https://doi.org/10.1016/j.ceramint.2010.08.018
- V. Stanic, S. Dimitrijevic, J. Antic-Stankovic, M. Mitriæ, B. Jokic, I.B. Pleæaš and S. Raièevic, Appl. Surf. Sci., 256, 6083 (2010); https://doi.org/10.1016/j.apsusc.2010.03.124
- K.L. Wong, C.T. Wong, W.C. Liu, H.B. Pan, M.K. Fong, W.M. Lam, W.L. Cheung, W.M. Tang, K.Y. Chiu, K.D.K. Luk and W.W. Lu, Biomaterials, 30, 3810 (2009); https://doi.org/10.1016/j.biomaterials.2009.04.016
- R.V. Suganthi, K. Elayaraja, M.I.A. Joshy, V.S. Chandra, E.K. Girija and S.N. Kalkura, Mater. Sci. Eng. C, 31, 593 (2011); https://doi.org/10.1016/j.msec.2010.11.025
- C. Sridevi, S. Sathishkumar, S. Elavarasan, R. Rajavel and P. Maheswaran, Chem. Sci. Trans., 7, 319 (2018); https://doi.org/10.7598/cst2018.1483
- D.S. Morais, J. Coelho, M.P. Ferraz, P.S. Gomes, M.H. Fernandes, N.S. Hussain, J.D. Santos and M.A. Lopes, J. Mater. Chem. B Mater. Biol. Med., 2, 5872 (2014); https://doi.org/10.1039/C4TB00484A
- S. Majeed and S.A. Shivashankar, J. Mater. Chem. B Mater. Biol. Med., 2, 5585 (2014); https://doi.org/10.1039/C4TB00763H
- Y. Lin, Z. Yang and J. Cheng, J. Rare Earths, 25, 452 (2007); https://doi.org/10.1016/S1002-0721(07)60455-4
- T. Naganuma and E. Traversa, Biomaterials, 35, 4441 (2014); https://doi.org/10.1016/j.biomaterials.2014.01.074
- A. Tanaka, Y. Nishimura, T. Sakaki, A. Fujita and T. Shin-Ike, J. Osaka Dent. Univ., 23, 111 (1989).
- T.J. Webster, E.A. Massa-Schlueter, J.L. Smith and E.B. Slamovich, Biomaterials, 25, 2111 (2004); https://doi.org/10.1016/j.biomaterials.2003.09.001
- S. Shruti, F. Andreatta, E. Furlani, E. Marin, S. Maschio and L. Fedrizzi, Appl. Surf. Sci., 378, 216 (2016); https://doi.org/10.1016/j.apsusc.2016.03.209
- S.K. Dhoke, A.S. Khanna and T.J.M. Sinha, Prog. Org. Coat., 64, 371 (2009); https://doi.org/10.1016/j.porgcoat.2008.07.023
- C. Sridevi, S. Sathishkumar, P. Karthikeyan and P. Maheswaran, Asian J. Chem., 31, 1549 (2019); https://doi.org/10.14233/ajchem.2019.21967
- E. Kolanthai, V.S. Dikeshwar Colon, P.A. Sindu, V.S. Chandra, K.R. Karthikeyan, M.S. Babu, S.M. Sundaram, M. Palanichamy and S.N. Kalkura, RSC Adv., 5, 18301 (2015); https://doi.org/10.1039/C4RA14584D
References
F.G. Correa, J.V. Granados, M.J. Reyes and L. A. Q. Granados, J. Chem., 2013, 751696 (2013); https://doi.org/10.1155/2013/751696
A.G. Mikos, S.W. Herring, P. Ochareon, J. Elisseeff, H.H. Lu, R. Kandel, F.J. Schoen, M. Toner, D. Mooney, A. Atala, M.E.V. Dyke, D. Kaplan and G. Vunjak-Novakovic, Tissue Eng., 12, 3307 (2006); https://doi.org/10.1089/ten.2006.12.3307
L.C. Lucas, L.J. Bearden and J.E. Lemons, eds.: A.C. Fraker and C.D. Griffin, Second Symposium, American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 208 (1985).
Y. Tang, S. Katsuma, S. Fujimoto and S. Hiromoto, Acta Biomater., 2, 709 (2006); https://doi.org/10.1016/j.actbio.2006.06.003
T. Tuken, Surf. Coat. Technol., 200, 4713 (2006); https://doi.org/10.1016/j.surfcoat.2005.04.011
E. De Las Heras, D.A. Egidi, P. Corengia, D. González-Santamaría, A. García-Luis, M. Brizuela, G.A. López and M.F. Martinez, Surf. Coat. Technol., 202, 2945 (2008); https://doi.org/10.1016/j.surfcoat.2007.10.037
Y. Okazaki, E. Gotoh, T. Manabe and K. Kobayashi, Biomaterials, 25, 5913 (2004); https://doi.org/10.1016/j.biomaterials.2004.01.064
M.K. Lei and X.M. Zhu, Biomaterials, 22, 641 (2001); https://doi.org/10.1016/S0142-9612(00)00226-X
D.G. Wang, C.Z. Chen, J. Ma and G. Zhang, Colloids Surf. B Biointerfaces, 66, 155 (2008); https://doi.org/10.1016/j.colsurfb.2008.06.003
F. Bir, H. Khireddine, A. Touati, D. Sidane, S. Yala and H. Oudadesse, Appl. Surf. Sci., 258, 7021 (2012); https://doi.org/10.1016/j.apsusc.2012.03.158
M. Chozhanathmisra, D. Govindaraj, P. Karthikeyan, K. Pandian, L. Mitu and R. Rajavel, J. Chem., 2018, 9813827 (2018); https://doi.org/10.1155/2018/9813827
Y.W. Song, D.Y. Shan and E.H. Han, Mater. Lett., 62, 3276 (2008); https://doi.org/10.1016/j.matlet.2008.02.048
Y. Han, T. Fu, J. Lu and K.W. Xu, J. Biomed. Mater. Res., 54, 96 (2001); https://doi.org/10.1002/1097-4636(200101)54:1<96::AIDJBM11>3.0.CO;2-U
D.Y. Lin and X.X. Wang, Ceram. Int., 37, 403 (2011); https://doi.org/10.1016/j.ceramint.2010.08.018
V. Stanic, S. Dimitrijevic, J. Antic-Stankovic, M. Mitriæ, B. Jokic, I.B. Pleæaš and S. Raièevic, Appl. Surf. Sci., 256, 6083 (2010); https://doi.org/10.1016/j.apsusc.2010.03.124
K.L. Wong, C.T. Wong, W.C. Liu, H.B. Pan, M.K. Fong, W.M. Lam, W.L. Cheung, W.M. Tang, K.Y. Chiu, K.D.K. Luk and W.W. Lu, Biomaterials, 30, 3810 (2009); https://doi.org/10.1016/j.biomaterials.2009.04.016
R.V. Suganthi, K. Elayaraja, M.I.A. Joshy, V.S. Chandra, E.K. Girija and S.N. Kalkura, Mater. Sci. Eng. C, 31, 593 (2011); https://doi.org/10.1016/j.msec.2010.11.025
C. Sridevi, S. Sathishkumar, S. Elavarasan, R. Rajavel and P. Maheswaran, Chem. Sci. Trans., 7, 319 (2018); https://doi.org/10.7598/cst2018.1483
D.S. Morais, J. Coelho, M.P. Ferraz, P.S. Gomes, M.H. Fernandes, N.S. Hussain, J.D. Santos and M.A. Lopes, J. Mater. Chem. B Mater. Biol. Med., 2, 5872 (2014); https://doi.org/10.1039/C4TB00484A
S. Majeed and S.A. Shivashankar, J. Mater. Chem. B Mater. Biol. Med., 2, 5585 (2014); https://doi.org/10.1039/C4TB00763H
Y. Lin, Z. Yang and J. Cheng, J. Rare Earths, 25, 452 (2007); https://doi.org/10.1016/S1002-0721(07)60455-4
T. Naganuma and E. Traversa, Biomaterials, 35, 4441 (2014); https://doi.org/10.1016/j.biomaterials.2014.01.074
A. Tanaka, Y. Nishimura, T. Sakaki, A. Fujita and T. Shin-Ike, J. Osaka Dent. Univ., 23, 111 (1989).
T.J. Webster, E.A. Massa-Schlueter, J.L. Smith and E.B. Slamovich, Biomaterials, 25, 2111 (2004); https://doi.org/10.1016/j.biomaterials.2003.09.001
S. Shruti, F. Andreatta, E. Furlani, E. Marin, S. Maschio and L. Fedrizzi, Appl. Surf. Sci., 378, 216 (2016); https://doi.org/10.1016/j.apsusc.2016.03.209
S.K. Dhoke, A.S. Khanna and T.J.M. Sinha, Prog. Org. Coat., 64, 371 (2009); https://doi.org/10.1016/j.porgcoat.2008.07.023
C. Sridevi, S. Sathishkumar, P. Karthikeyan and P. Maheswaran, Asian J. Chem., 31, 1549 (2019); https://doi.org/10.14233/ajchem.2019.21967
E. Kolanthai, V.S. Dikeshwar Colon, P.A. Sindu, V.S. Chandra, K.R. Karthikeyan, M.S. Babu, S.M. Sundaram, M. Palanichamy and S.N. Kalkura, RSC Adv., 5, 18301 (2015); https://doi.org/10.1039/C4RA14584D