Copyright (c) 2019 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Synthesis and Applications of Polymer Chelating Resins Containing Schiff Base
Corresponding Author(s) : Raghad Ali Hamed
Asian Journal of Chemistry,
Vol. 31 No. 9 (2019): Vol 31 Issue 9
Abstract
In this article, a series of Schiff-base compounds is prepared by consending aromatic dialdehydes and diamines in the presence of p-toluenesulfonic acid as catalyst. The prepared Schiff bases are characterized by CHNS/O, NMR and FTIR techniques. Moreover, analytical applications of Schiff bases as chelating agent was evaluated by loading (20 %) of compounds (B and C) the urethanic foams. Furthermore, chelating resins type P1 (B) and P2 (C) are also prepared by loading the Schiff base into polymer backbones. Moreover, the batch process is used to study the ability of these resins in recovering metals ions, such as (Mg2+, Pb2+, Cu2+, Cr3+, Ni2+, Co2+, Cd2+ and Ca2+). The study is performed by considering the contact time and pH value. Finally, the polymer’s maximum loading capacity is in the following sequence: P1 (B) Co2+ > Cr3+ > Mg2+ > Ni2+ > Cd2+ > Ca2+ > Pb2+ > Cu2+; P2 (C) Mg2+ > Cd2+ > Ca2+ > Co2+ > Pb2+ > Cu2+ > Cr3+.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- A.M. Abu-Dief and I.M.A. Mohamed, Beni-Suef Univ. J. Basic Appl. Sci., 4, 119 (2015); https://doi.org/10.1016/j.bjbas.2015.05.004.
- L.M. Aguirre-Díaz, N. Snejko, M. Iglesias, F. Sánchez, E. GutiérrezPuebla and M.A. Monge, Inorg. Chem., 57, 6883 (2018); https://doi.org/10.1021/acs.inorgchem.8b00465.
- S. Saranya, N.A. Harry, K.K. Krishnan and G. Anilkumar, Asian J. Org. Chem., 7, 613 (2018); https://doi.org/10.1002/ajoc.201700679.
- K. Kaviyarasu, N. Geetha, K. Kanimozhi, C. Maria Magdalane, S. Sivaranjani, A. Ayeshamariam, J. Kennedy and M. Maaza, Mater. Sci. Eng. C, 74, 325 (2017); https://doi.org/10.1016/j.msec.2016.12.024.
- N. M’hiri, D. Veys-Renaux, E. Rocca, I. Ioannou, N.M. Boudhrioua and M. Ghoul, Corros. Sci., 102, 55 (2016); https://doi.org/10.1016/j.corsci.2015.09.017.
- K. Yang, B. Chen, X. Zhu and B. Xing, Environ. Sci. Technol., 50, 11066 (2016); https://doi.org/10.1021/acs.est.6b04235.
- R.A. Silva, K. Hawboldt and Y. Zhang, Miner. Process. Extract. Metal. Rev., 39, 395 (2018); https://doi.org/10.1080/08827508.2018.1459619.
- D.P. Zagklis, A.I. Vavouraki, M.E. Kornaros and C.A. Paraskeva, J. Hazard. Mater., 285, 69 (2015); https://doi.org/10.1016/j.jhazmat.2014.11.038.
- L. Gao, K. Deng, J. Zheng, B. Liu and Z. Zhang, Chem. Eng. J., 270, 444 (2015); https://doi.org/10.1016/j.cej.2015.02.068.
- J. Weinberg, S. Zhang, A. Kirkby, E. Shachar, G. Carta and T. Przybycien, J. Chromatogr. A, 1546, 89 (2018); https://doi.org/10.1016/j.chroma.2018.02.024.
- S.A. Ali and M.A. Mazumder, J. Hazard. Mater., 350, 169 (2018); https://doi.org/10.1016/j.jhazmat.2018.02.033.
- F.N. Jones, M.E. Nichols and S.P. Pappas, Organic Coatings: Science and Technology, John Wiley & Sons (2017).
- C. Janáky and K. Rajeshwar, Prog. Polym. Sci., 43, 96 (2015); https://doi.org/10.1016/j.progpolymsci.2014.10.003.
- L. Cui, J. Wu and H. Ju, Biosens. Bioelectron., 63, 276 (2015); https://doi.org/10.1016/j.bios.2014.07.052.
- M. Ceglowski and G. Schroeder, Chem. Eng. J., 263, 402 (2015); https://doi.org/10.1016/j.cej.2014.11.047.
- I. Bauer and H.J. Knölker, Chem. Rev., 115, 3170 (2015); https://doi.org/10.1021/cr500425u.
References
A.M. Abu-Dief and I.M.A. Mohamed, Beni-Suef Univ. J. Basic Appl. Sci., 4, 119 (2015); https://doi.org/10.1016/j.bjbas.2015.05.004.
L.M. Aguirre-Díaz, N. Snejko, M. Iglesias, F. Sánchez, E. GutiérrezPuebla and M.A. Monge, Inorg. Chem., 57, 6883 (2018); https://doi.org/10.1021/acs.inorgchem.8b00465.
S. Saranya, N.A. Harry, K.K. Krishnan and G. Anilkumar, Asian J. Org. Chem., 7, 613 (2018); https://doi.org/10.1002/ajoc.201700679.
K. Kaviyarasu, N. Geetha, K. Kanimozhi, C. Maria Magdalane, S. Sivaranjani, A. Ayeshamariam, J. Kennedy and M. Maaza, Mater. Sci. Eng. C, 74, 325 (2017); https://doi.org/10.1016/j.msec.2016.12.024.
N. M’hiri, D. Veys-Renaux, E. Rocca, I. Ioannou, N.M. Boudhrioua and M. Ghoul, Corros. Sci., 102, 55 (2016); https://doi.org/10.1016/j.corsci.2015.09.017.
K. Yang, B. Chen, X. Zhu and B. Xing, Environ. Sci. Technol., 50, 11066 (2016); https://doi.org/10.1021/acs.est.6b04235.
R.A. Silva, K. Hawboldt and Y. Zhang, Miner. Process. Extract. Metal. Rev., 39, 395 (2018); https://doi.org/10.1080/08827508.2018.1459619.
D.P. Zagklis, A.I. Vavouraki, M.E. Kornaros and C.A. Paraskeva, J. Hazard. Mater., 285, 69 (2015); https://doi.org/10.1016/j.jhazmat.2014.11.038.
L. Gao, K. Deng, J. Zheng, B. Liu and Z. Zhang, Chem. Eng. J., 270, 444 (2015); https://doi.org/10.1016/j.cej.2015.02.068.
J. Weinberg, S. Zhang, A. Kirkby, E. Shachar, G. Carta and T. Przybycien, J. Chromatogr. A, 1546, 89 (2018); https://doi.org/10.1016/j.chroma.2018.02.024.
S.A. Ali and M.A. Mazumder, J. Hazard. Mater., 350, 169 (2018); https://doi.org/10.1016/j.jhazmat.2018.02.033.
F.N. Jones, M.E. Nichols and S.P. Pappas, Organic Coatings: Science and Technology, John Wiley & Sons (2017).
C. Janáky and K. Rajeshwar, Prog. Polym. Sci., 43, 96 (2015); https://doi.org/10.1016/j.progpolymsci.2014.10.003.
L. Cui, J. Wu and H. Ju, Biosens. Bioelectron., 63, 276 (2015); https://doi.org/10.1016/j.bios.2014.07.052.
M. Ceglowski and G. Schroeder, Chem. Eng. J., 263, 402 (2015); https://doi.org/10.1016/j.cej.2014.11.047.
I. Bauer and H.J. Knölker, Chem. Rev., 115, 3170 (2015); https://doi.org/10.1021/cr500425u.