Continuous Production of Barium Titanate Nanopowder by Hydrothermal Synthesis

Hui Xu; Min Zeng

doi:10.14233/ajchem.2015.16932

Issue

Vol. 27 No. 2 (2015): Vol 27 Issue 2

Issue Published : January 10, 2015

This work is licensed under a Creative Commons Attribution 4.0 International License.

Continuous Production of Barium Titanate Nanopowder by Hydrothermal Synthesis

https://doi.org/10.14233/ajchem.2015.16932

Hui Xu

School of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, P.R. China

Min Zeng

School of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, P.R. China

Corresponding Author(s) : Min Zeng

zengmin@swust.edu.cn

Asian Journal of Chemistry, Vol. 27 No. 2 (2015): Vol 27 Issue 2
Article Published : January 10, 2015

Abstract

Continuous production of barium titanate fine particles were performed by hydrothermal synthesis process using a green reaction system. The mechanism of particle formation and growth and the feasibility of continuous production of barium titanate particles were also discussed. The separation solution had been reclaimed and recycled as a base solution, after the hydrothermal reaction in this study. This recycled process has been studied at least 9 cycles. The effect of the mineralizer and Ti-precursor material on particle size and its morphology was investigated.

Keywords

Hydrothermal synthesis Barium titanate Ammonia Poly(ethylene glycol)

Xu, H., & Zeng, M. (2015). Continuous Production of Barium Titanate Nanopowder by Hydrothermal Synthesis. Asian Journal of Chemistry, 27(2), 425–428. https://doi.org/10.14233/ajchem.2015.16932

Download Citation

References

C. Pithan, D. Hennings and R. Waser, Int. J. Appl. Ceram. Technol., 2, 1 (2005); doi:10.1111/j.1744-7402.2005.02008.x.
M. Teresa Buscaglia, C. Harnagea, M. Dapiaggi, V. Buscaglia, A. Pignolet and P. Nanni, Chem. Mater., 21, 5058 (2009); doi:10.1021/cm9015047.
S.G. Kwon, B.H. Park, K. Choi, E.-S. Choi, S. Nam, J.-W. Kim and J.-H. Kim, J. Eur. Ceram. Soc., 26, 1401 (2006); doi:10.1016/j.jeurceramsoc.2005.02.003.
S. Su, R. Zuo, D. Lv and J. Fu, Powder Technol., 217, 11 (2012); doi:10.1016/j.powtec.2011.09.045.
J.Q. Qi, L. Sun, Y. Wang, W.P. Chen, P. Du, Y.G. Xu, L.T. Li, C.W. Nan and H.L.W. Chan, Adv. Powder Technol., 22, 401 (2011); doi:10.1016/j.apt.2010.06.007.
S.K. Tripathy, T. Sahoo, M. Mohapatra, S. Anand and R.P. Das, Mater. Lett., 59, 3543 (2005); doi:10.1016/j.matlet.2005.06.024.
A. Testino, V. Buscaglia, M.T. Buscaglia, M. Viviani and P. Nanni, Chem. Mater., 17, 5346 (2005); doi:10.1021/cm051119f.
V. Swaminathan, S.S. Pramana, T.J. White, L. Chen, R. Chukka and R.V. Ramanujan, ACS Appl. Mater. Interfaces, 2, 3037 (2010); doi:10.1021/am1004865.
M. Zeng, N. Uekawa, T. Kojima and K. Kakegawa, J. Mater. Res., 22, 2631 (2007); doi:10.1557/jmr.2007.0337.
X.Y. Chen, M.H. Qiao, S.H. Xie, Fan, Zhou and He, J. Am. Chem. Soc., 129, 13305 (2007); doi:10.1021/ja074834u.
V. Vinothini, P. Singh and M. Balasubramanian, Ceram. Int., 32, 99 (2006); doi:10.1016/j.ceramint.2004.12.012.
M. Zeng, Appl. Surf. Sci., 257, 6636 (2011); doi:10.1016/j.apsusc.2011.02.090.
J.O. Eckert, C.C. Hung-Houston, B.L. Gersten, M.M. Lencka and R.E. Riman, J. Am. Ceram. Soc., 79, 2929 (1996); doi:10.1111/j.1151-2916.1996.tb08728.x.
J. Moon, E. Suvaci, A. Morrone, S.A. Costantino and J.H. Adair, J. Eur. Ceram. Soc., 23, 2153 (2003); doi:10.1016/S0955-2219(03)00016-5.
B. Sahoo and P.K. Panda, Ceram. Int., 38, 5189 (2012); doi:10.1016/j.ceramint.2012.03.025.
M.M. Vijatović Petrović, J.D. Bobić, A.M. Radojković, J. Banys and B.D. Stojanović, Ceram. Int., 38, 5347 (2012); doi:10.1016/j.ceramint.2012.03.041.
N. Uekawa, M. Endo, K. Kakegawa and Y. Sasaki, Phys. Chem. Chem. Phys., 2, 5485 (2000); doi:10.1039/b003611k.

References

C. Pithan, D. Hennings and R. Waser, Int. J. Appl. Ceram. Technol., 2, 1 (2005); doi:10.1111/j.1744-7402.2005.02008.x.

M. Teresa Buscaglia, C. Harnagea, M. Dapiaggi, V. Buscaglia, A. Pignolet and P. Nanni, Chem. Mater., 21, 5058 (2009); doi:10.1021/cm9015047.

S.G. Kwon, B.H. Park, K. Choi, E.-S. Choi, S. Nam, J.-W. Kim and J.-H. Kim, J. Eur. Ceram. Soc., 26, 1401 (2006); doi:10.1016/j.jeurceramsoc.2005.02.003.

S. Su, R. Zuo, D. Lv and J. Fu, Powder Technol., 217, 11 (2012); doi:10.1016/j.powtec.2011.09.045.

J.Q. Qi, L. Sun, Y. Wang, W.P. Chen, P. Du, Y.G. Xu, L.T. Li, C.W. Nan and H.L.W. Chan, Adv. Powder Technol., 22, 401 (2011); doi:10.1016/j.apt.2010.06.007.

S.K. Tripathy, T. Sahoo, M. Mohapatra, S. Anand and R.P. Das, Mater. Lett., 59, 3543 (2005); doi:10.1016/j.matlet.2005.06.024.

A. Testino, V. Buscaglia, M.T. Buscaglia, M. Viviani and P. Nanni, Chem. Mater., 17, 5346 (2005); doi:10.1021/cm051119f.

V. Swaminathan, S.S. Pramana, T.J. White, L. Chen, R. Chukka and R.V. Ramanujan, ACS Appl. Mater. Interfaces, 2, 3037 (2010); doi:10.1021/am1004865.

M. Zeng, N. Uekawa, T. Kojima and K. Kakegawa, J. Mater. Res., 22, 2631 (2007); doi:10.1557/jmr.2007.0337.

X.Y. Chen, M.H. Qiao, S.H. Xie, Fan, Zhou and He, J. Am. Chem. Soc., 129, 13305 (2007); doi:10.1021/ja074834u.

V. Vinothini, P. Singh and M. Balasubramanian, Ceram. Int., 32, 99 (2006); doi:10.1016/j.ceramint.2004.12.012.

M. Zeng, Appl. Surf. Sci., 257, 6636 (2011); doi:10.1016/j.apsusc.2011.02.090.

J.O. Eckert, C.C. Hung-Houston, B.L. Gersten, M.M. Lencka and R.E. Riman, J. Am. Ceram. Soc., 79, 2929 (1996); doi:10.1111/j.1151-2916.1996.tb08728.x.

J. Moon, E. Suvaci, A. Morrone, S.A. Costantino and J.H. Adair, J. Eur. Ceram. Soc., 23, 2153 (2003); doi:10.1016/S0955-2219(03)00016-5.

B. Sahoo and P.K. Panda, Ceram. Int., 38, 5189 (2012); doi:10.1016/j.ceramint.2012.03.025.

M.M. Vijatović Petrović, J.D. Bobić, A.M. Radojković, J. Banys and B.D. Stojanović, Ceram. Int., 38, 5347 (2012); doi:10.1016/j.ceramint.2012.03.041.

N. Uekawa, M. Endo, K. Kakegawa and Y. Sasaki, Phys. Chem. Chem. Phys., 2, 5485 (2000); doi:10.1039/b003611k.

Issue

Vol. 27 No. 2 (2015): Vol 27 Issue 2

Continuous Production of Barium Titanate Nanopowder by Hydrothermal Synthesis

Corresponding Author(s) : Min Zeng

Abstract

Keywords

Full Article

Download Citation

References

Table Of Contents