Issue

Vol. 34 No. 9 (2022): Vol 34 Issue 9

Copyright (c) 2022 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Facile Fabrication of Manganese Dioxide Composite Incorporated Aluminium Rich Alloy Metal Matrix as Efficient Sacrificial Anodes

https://doi.org/10.14233/ajchem.2022.23879
K.K. Binoj
Department of Chemistry, Catholicate College (Affiliated to Mahatma Gandhi University), Pathanamthita-689645, India
P.Y. Jinu
Department of Chemistry, Catholicate College (Affiliated to Mahatma Gandhi University), Pathanamthita-689645, India

Corresponding Author(s) : K.K. Binoj

kbinuk82@gmail.com

Asian Journal of Chemistry, Vol. 34 No. 9 (2022): Vol 34 Issue 9

Abstract

Nanosized manganese dioxide was prepared by anodic electro deposition method under standardized experimental conditions. Aluminum-zinc alloy sacrificial anodes incorporated with MnO2 nanoparticles were fabricated for cathodic protection of steel. The physico-chemical properties of anodes were enhanced by uniform dispersion and infiltration of the nano-MnO2 particles into the Al-Zn matrix. Such effective and uniform presence of nano-MnO2 inside the interior mass of the anodes was characterized by electrochemical techniques. The anodes exhibited stable potential in open circuit, small polarization and significant rate of depletion in self-corrosion in the course of galvanic immersion studies. The existence of nanocomposite particles in the anode matrix caused effective destruction of the passive aluminia film, which facilitated enrichment of galvanic performance of anode. The anode had better endurance against biofouling also.

Keywords

Aluminium alloy Metal matrix composites Corrosion Nanocomposites
Binoj, K., & Jinu, P. (2022). Facile Fabrication of Manganese Dioxide Composite Incorporated Aluminium Rich Alloy Metal Matrix as Efficient Sacrificial Anodes. Asian Journal of Chemistry, 34(9), 2257–2264. https://doi.org/10.14233/ajchem.2022.23879
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. C. Gonzalez, J. Genesca, O. Alvarez and J.A. Juarez-Islas, Metall. Mater. Trans., A Phys. Metall. Mater. Sci., 34, 2991 (2003); https://doi.org/10.1007/s11661-003-0198-6
  2. M. del Rosario Silva Campos, C. Blawert, N. Scharnag, M. Störmer and M.L. Zheludkevich, Materials, 15, 1301 (2022); https://doi.org/10.3390/ma15041301
  3. A. Barbucci, P.L. Cabot, G. Bruzzone and G. Cerisola, J. Alloys Compd., 268, 295 (1998); https://doi.org/10.1016/S0925-8388(97)00605-1
  4. S.Z.E. Abedin and F. Endres, J. Appl. Electrochem., 34, 1071 (2004); https://doi.org/10.1023/B:JACH.0000042672.23588.df
  5. D.O. Flamini, S.B. Saidman and J.B. Bessone, Thin Solid Films, 515, 7880 (2007); https://doi.org/10.1016/j.tsf.2007.04.016
  6. J.L. Ma, J.B. Wen and X.W. Lu, Corros. Sci., 51, 2115 (2009); https://doi.org/10.1016/j.corsci.2009.05.039
  7. J.L. Ma and J. Wen, J. Alloys Compd., 496, 110 (2010); https://doi.org/10.1016/j.jallcom.2010.02.174
  8. D.R. Salinas, S.G. Garcia and J.B. Bessone, J. Appl. Electrochem., 29, 1063 (1999); https://doi.org/10.1023/A:1003684219989
  9. S.M.A. Shibli, B. Jabeera and R. Manu, Mater. Lett., 61, 3000 (2007); https://doi.org/10.1016/j.matlet.2006.10.062
  10. Y. Zhan and G. Zhang, Mater. Lett., 57, 4583 (2003); https://doi.org/10.1016/S0167-577X(03)00365-3
  11. G. Karunakaran, R. Suriyaprabha, V. Rajendran and N. Kannan, IET Nanobiotechnol., 10, 171 (2016); https://doi.org/10.1049/iet-nbt.2015.0007
  12. P.M. Ashraf and S.M.A. Shibli, Electrochem. Commun., 9, 443 (2007); https://doi.org/10.1016/j.elecom.2006.09.010
  13. P.M. Ashraf and L. Edwin, J. Alloys Compd., 548, 82 (2013); https://doi.org/10.1016/j.jallcom.2012.09.020
  14. S.R. Archana, P.S. Arun, B.R. Sreelekshmi and S.M.A. Shibli, Mater. Sci. Eng. B, 261, 114768 (2020); https://doi.org/10.1016/j.mseb.2020.114768
  15. B. Balaraju, S. Kaleemulla and C. Krishnamoorthi, J. Magn. Magn. Mater., 464, 36 (2018); https://doi.org/10.1016/j.jmmm.2018.05.039
  16. Y. Dong, J. Zhao, J.Y. Zhang, Y. Chen, X. Yang, W. Song, L. Wei and W. Li, Chem. Eng. J., 388, 124244 (2020); https://doi.org/10.1016/j.cej.2020.124244
  17. K. Rajendra Prasad and N. Miura, Electrochem. Commun., 6, 1004 (2004); https://doi.org/10.1016/j.elecom.2004.07.017
  18. K.M. Racik, K. Guruprasad, M. Mahendiran, J. Madhavan, T. Maiyalagan and M.V.A. Raj, J. Mater. Sci.: Mater. Electr., 30, 5222 (2019); https://doi.org/10.1007/s10854-019-00821-3
  19. J. Liu, J. Jiang, M. Bosman and H.J. Fan, J. Mater. Chem., 22, 2419 (2012); https://doi.org/10.1039/C1JM14804D
  20. S.G. Hwang, S.H. Ryu, S.R. Yun, J.M. Ko, K.M. Kim and K.S. Ryu, Mater. Chem. Phys., 130, 507 (2011); https://doi.org/10.1016/j.matchemphys.2011.07.022
  21. H. Kim and B.N. Popov, J. Electrochem. Soc., 150, 56 (2003); https://doi.org/10.1149/1.1541675
  22. P.C. Maity, P.N. Chakraborty and S.C. Panigrahi, Mater. Lett., 20, 93 (1994); https://doi.org/10.1016/0167-577X(94)90068-X
  23. A.A. Hamid, S.C. Jain, P.K. Ghosh and S. Ray, Metall. Mater. Trans., A Phys. Metall. Mater. Sci., 36, 2211 (2005); https://doi.org/10.1007/s11661-005-0340-8
  24. A.A. Hamid, P.K. Ghosh, J.C. Jain and S. Ray, Wear, 260, 368 (2006); https://doi.org/10.1016/j.wear.2005.02.120
  25. C.J. Clarke, G.J. Browning and S.W. Donne, Electrochim. Acta, 51, 5773 (2006); https://doi.org/10.1016/j.electacta.2006.03.013
  26. D.K. Walanda, G.A. Lawrance and S.W. Donne, J. Power Sources, 139, 325 (2005); https://doi.org/10.1016/j.jpowsour.2004.06.062
  27. D. Wang, Z.Y. Ma and Z.M. Gao, Mater. Chem. Phys., 117, 228 (2009); https://doi.org/10.1016/j.matchemphys.2009.05.048
  28. S.M.A. Shibli, S.R. Archana and P. Muhamed Ashraf, Corros. Sci., 50, 2232 (2008); https://doi.org/10.1016/j.corsci.2008.06.017
  29. S.M.A. Shibli and K.K. Binoj, J. Appl. Electrochem., 39, 159 (2009); https://doi.org/10.1007/s10800-008-9659-3
  30. S.M.A. Shibli, V.S. Dilimon and V.S. Saji, J. Solid State Electrochem., 11, 201 (2006); https://doi.org/10.1007/s10008-005-0088-5
  31. S.M.A. Shibli and S. George, Appl. Surf. Sci., 253, 7510 (2007); https://doi.org/10.1016/j.apsusc.2007.03.052
  32. J. He, J. Wen and X. Li, Corros. Sci., 53, 1948 (2011); https://doi.org/10.1016/j.corsci.2011.02.016
  33. A. Venugopal and V.S. Raja, Corros. Sci., 39, 2053 (1997); https://doi.org/10.1016/S0010-938X(97)00082-6
  34. J.B. Bessone, D.R. Salinas, C.E. Mayer, M. Ebert and W.J. Lorenz, Electrochim. Acta, 37, 2283 (1992); https://doi.org/10.1016/0013-4686(92)85124-4
  35. L. Bai and B.E. Conway, Electrochim. Acta, 38, 1803 (1993); https://doi.org/10.1016/0013-4686(93)80302-G
  36. H. Baorong, Z. Jinglei, L. Yanxu and Y. Fangying, Mater. Corros., 52, 219 (2001); https://doi.org/10.1002/1521-4176(200103)52:3<219::AIDMACO219>3.0.CO;2-W
  37. A.S. Yaro, H. Aljendeel and A.A. Khadom, Desalination, 270, 193 (2011); https://doi.org/10.1016/j.desal.2010.11.045
  38. S. Gudic, J. Radosevic, I. Smoljko and M. Kliskic, Electrochim. Acta, 50, 5624 (2005); https://doi.org/10.1016/j.electacta.2005.03.041
  39. K. Sasaki and G.T. Burstein, Corros. Sci., 38, 2111 (1996); https://doi.org/10.1016/S0010-938X(96)00066-2
  40. J.L. Ma, J.B. Wen and X.W. Lu, Corros. Prot., 30, 373 (2009).
  41. B. Li and B.E. Logan, Colloids Surf. B Biointerfaces, 41, 153 (2005); https://doi.org/10.1016/j.colsurfb.2004.12.001
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 0 Download : 0