Issue

Vol. 26 No. 8 (2014): Vol 26 Issue 8

Copyright (c) 2014 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Solvent Extraction of Titanium(IV) with Organophosphorus Extractant from Chloride Solutions

https://doi.org/10.14233/ajchem.2014.15697
Chunlei Ma
School of Chemical Engineering and Technology, Tianjin University, Tianjin, P.R. China
Xianghai Guo
School of Chemical Engineering and Technology, Tianjin University, Tianjin, P.R. China
Peng Bai
School of Chemical Engineering and Technology, Tianjin University, Tianjin, P.R. China

Corresponding Author(s) : Xianghai Guo

guoxh@tju.edu.cn

Asian Journal of Chemistry, Vol. 26 No. 8 (2014): Vol 26 Issue 8

Abstract

The organophosphorus extractants for extraction of Ti(IV) from chloride solutions were introduced, mainly including acidic organophosphorus extractants such as D2EHPA, EHEHPA, Cyanex 272, Cyanex 302, Cyanex 301 and neutral organophosphorus extractants like Cyanex 923 (TRPO), tri-octyl phosphine oxide (TOPO) and tri-n-butyl phosphate (TBP). The extraction behaviours like extraction mechanism, extraction equilibrium, loading capacity, stripping behaviour and selectivity were reviewed, along with the effect of acidity, diluent and metal concentration to Ti(IV) extraction. The Ti(IV) extraction equilibrium time with acidic organophosphorus extractants is more than 1 h except Cyanex 302 and Cyanex 301 with which less than 5 min are required to reach equilibrium. The Ti(IV) extraction kinetics with neutral organophosphorus extractant is also fast: the extraction reaches equilibrium within 3-5 min. Stripping Ti(IV) from loaded acidic organophosphorus extractants is difficult, while from neutral ones is much easier. Compared to neutral organophosphorus extractants, the practical application of acidic organophosphorus compound is difficult for Ti(IV) extraction due to their slow extraction equilibrium and difficulty in stripping and neutral organophosphorus extractants could be used to separate both Fe(III) and Ti(IV) from other metal impurities. TBP could be used for separation Fe(III) from Ti(IV) and other metal ions.

Keywords

Titanium Solvent extraction Organophosphorus extractant Chloride solution
Ma, C., Guo, X., & Bai, P. (2014). Solvent Extraction of Titanium(IV) with Organophosphorus Extractant from Chloride Solutions. Asian Journal of Chemistry, 26(8), 2277–2284. https://doi.org/10.14233/ajchem.2014.15697
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. P.M. Hext, J.A. Tomenson and P. Thompson, Ann. Occup. Hyg., 49, 461 (2005); doi:10.1093/annhyg/mei012.
  2. W. Duyvesteyn, B. Sabachy, V. Edmund, D. Verhulst, T.M. Spitler, J.R. Burkholder, B.J. Paulus and M. Huls, US Patent 6375923 (2002).
  3. K.C. Sole, Hydrometallurgy, 51, 239 (1999); doi:10.1016/S0304-386X(98)00081-4.
  4. R.K. Singh and P.M. Dhadke, J. Serb. Chem. Soc., 67, 507 (2002); doi:10.2298/JSC0207507S.
  5. T. Sato, Sigen-to-Sazai, 119, 175 (2003); doi:10.2473/shigentosozai.119.175.
  6. G.C. da Silva, J.W.S.D. Cunha, J. Dweck and J.C. Afonso, Miner. Eng., 21, 416 (2008); doi:10.1016/j.mineng.2007.10.013.
  7. L.G.M. Reyes, E.R.S. Miguel, J.P.S. Guerrero and J. Gyves, J. Mex. Chem. Soc., 55, 72 (2011).
  8. R.K. Biswas and D.A. Begum, Hydrometallurgy, 49, 263 (1998); doi:10.1016/S0304-386X(98)00031-0.
  9. K.S. John, T.P. Rao, T.R. Ramamohan and M.L.P. Reddy, Hydrometallurgy, 53, 245 (1999); doi:10.1016/S0304-386X(99)00049-3.
  10. J. Saji and M.L.P. Reddy, Sep. Sci. Technol., 38, 427 (2003); doi:10.1081/SS-120016583.
  11. D. Fontana, P. Kulkarni and L. Pietrelli, Hydrometallurgy, 77, 219 (2005); doi:10.1016/j.hydromet.2005.01.003.
  12. T. Sato, Solvent Extrac. Res. Dev., 10, 113 (2003).
  13. A. Borsalani, H. Ghahremani, S. Seyfi and M. Abdi, Der Chemica Sinica, 2, 204 (2011).
  14. J. Thomas, G.D. Surender and M.L.P. Reddy, Investigations on the Recovery of Titanium, Vanadium and Iron Values from the Waste Chloride Liquors of Titania Industry, Ch. 2 & 5, Council for Scientific and Industrial Research (2004).
  15. M. Ulewicz and W. Walkowiak, Selective Removal Trans. Metal Ions, 31, 73 (2005).
  16. J. Saji, K.S. John and M.L.P. Reddy, Solvent Extrac. Ion Exchan., 18, 877 (2000); doi:10.1080/07366290008934712.
  17. A. Deep, R. Malik and B. Gupta, Sep. Sci. Technol., 36, 671 (2001); doi:10.1081/SS-100102953.
  18. B. Pospiech and W. Walkowiak, Physicochem. Probl. Miner. Process, 44, 195 (2010).
  19. J. Jayachandran and P.M. Dhadke, Talanta, 44, 1285 (1997); doi:10.1016/S0039-9140(97)02190-5.
  20. K.M. Allal, D. Hauchard, M. Stambouli, D. Pareau and G. Durand, Hydrometallurgy, 45, 113 (1997); doi:10.1016/S0304-386X(96)00064-3.
  21. V.G. Maiorov, A. Nikolaev and V.K. Kopkov, Russ. J. Inorg. Chem., 45, 1310 (2000).
  22. J. Thomas, G.D. Surender and M.L.P. Reddy, Sep. Sci. Technol., 39, 1695 (2005); doi:10.1081/SS-120030798.
  23. S. Seyfi and M. Abdi, Miner. Eng., 22, 116 (2009); doi:10.1016/j.mineng.2008.05.003.
  24. M.E. Nasab, S.A. Milani and A. Sam, J. Radioanal. Nucl. Chem., (2011).
  25. X. Mao and D. Liu, Advanced Mater. Res., 550-553, 616 (2012); doi:10.4028/www.scientific.net/AMR.550-553.616.
  26. K.C. Sole, A. Feather and J.P. O’Connell, Hydrometallurgy, 51, 275 (1999); doi:10.1016/S0304-386X(98)00089-9.
  27. X. Hao, L. Lu, B. Liang, C. Li, P. Wu and J. Wang, Hydrometallurgy, 113-114, 185 (2012); doi:10.1016/j.hydromet.2011.12.023.
  28. K. Xie, K. Huang, L. Xu, P. Yu, L. Yang and H. Liu, Ind. Eng. Chem. Res., 50, 6362 (2011); doi:10.1021/ie1022354.
  29. K.C. Sole, Hydrometallurgy, 51, 263 (1999); doi:10.1016/S0304-386X(98)00090-5.
  30. J. Saji, T.P. Rao, C.S.P. Iyer and M.L.P. Reddy, Hydrometallurgy, 49, 289 (1998); doi:10.1016/S0304-386X(98)00030-9.
  31. K. Saji John, J. Saji, M.L.P. Reddy, T.R. Ramamohan and T.P. Rao, Hydrometallurgy, 51, 9 (1999); doi:10.1016/S0304-386X(98)00066-8.
  32. P. Narayanan Remya and M. Lakshmipathy Reddy, J. Chem. Technol. Biotechnol., 79, 734 (2004); doi:10.1002/jctb.1046.
  33. B.Z. Wang, B.J. Sabacky and D.E. Verhulst, W.O. Patent, 2008/157275 (2008).
  34. J. Saji and M.L.P. Reddy, Hydrometallurgy, 61, 81 (2001); doi:10.1016/S0304-386X(01)00146-3.
  35. B. Pospiech, W. Walkowiak and M.J. Woznlak, Physicochem. Probl. Miner. Process., 39, 89 (2005).
  36. R.K. Mishra, P.C. Rout, K. Sarangi and K.C. Nathsarma, Hydrometallurgy, 104, 298 (2010); doi:10.1016/j.hydromet.2010.07.003.
  37. B.R. Reddy and P.V.R. Bhaskara Sarma, Hydrometallurgy, 43, 299 (1996); doi:10.1016/0304-386X(95)00117-Y.
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 2 Download : 0