Copyright (c) 2014 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Structure and Magnetic Behaviours of Melt-Spun Ti1.4V0.6Ni Alloy Containing Icosahedral Quasicrystalline Phase
Corresponding Author(s) : W.Q. Liu
Asian Journal of Chemistry,
Vol. 26 No. 17 (2014): Vol 26 Issue 17
Abstract
The ribbons of Ti1.4V0.6Ni and TiVNi alloys were synthesized by arc-melting and subsequent melt-spinning techniques. The structures and magnetic properties were investigated. The results showed that the icosahedral quasicrystal (I-phase), Ti2Ni-type face centered cubic (FCC) phase and body centered cubic (BCC) structural solid solution phase existed in Ti1.4V0.6Ni alloy and the Ti2Ni-type FCC phase and BCC solid solution phase presented in TiVNi alloy. The relationships of M-H (magnetization - magnetic field) and M-T (magnetization-temperature) of the alloy ribbons were investigated by using SQUID (superconductivity quantum interference device). The results demonstrated that the magnetic behaviour was different, which is the Ti1.4V0.6Ni alloy ribbons exhibited higher ferromagnetic properties than those of TiVNi alloy ribbons both at 15 and 300 K.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- R.M. Stroud, A.M. Viano, P.C. Gibbons, K.F. Kelton and S.T. Misture, Appl. Phys. Lett., 69, 2998 (1996); doi:10.1063/1.117756.
- K.F. Kelton, W.J. Kim and R.M. Stroud, Appl. Phys. Lett., 70, 3230 (1997); doi:10.1063/1.119133.
- A.M. Viano, R.M. Stroud, P.C. Gibbons, A.F. McDowell, M.S. Conradi and K.F. Kelton, Phys. Rev. B, 51, 12026 (1995); doi:10.1103/PhysRevB.51.12026.
- J.Y. Kim, R. Hennig, V.T. Huett, P.C. Gibbons and K.F. Kelton, J. Alloys Comp., 404-406, 388 (2005); doi:10.1016/j.jallcom.2005.02.089.
- W.J. Kim and K.F. Kelton, Philos. Mag. A, 72, 1397 (1995); doi:10.1080/01418619508236263.
- W.J. Kim and K.F. Kelton, Philos. Mag. Lett., 74, 439 (1996); doi:10.1080/095008396179977.
- W.J. Kim, P.C. Gibbons and K.F. Kelton, Philos. Mag. A, 78, 1111 (1998); doi:10.1080/01418619808239978.
- A. Sadoc, J.Y. Kim and K.F. Kelton, Philos. Mag. A, 79, 2763 (1999); doi:10.1080/01418619908212022.
- S. Nimori, A.P. Tsai and G. Kido, Physica B, 237-238, 565 (1997); doi:10.1016/S0921-4526(97)00250-0.
- M. Roy, J. Magn. Magn. Mater., 302, 52 (2006); doi:10.1016/j.jmmm.2005.08.021.
- D. Rau, J.L. Gavilano, Sh. Mushkolaj, C. Beeli and H.R. Ott, J. Magn. Magn. Mater., 272-276, 1330 (2004); doi:10.1016/j.jmmm.2003.12.098.
- I.R. Fisher, Z. Islam, J. Zarestky, C. Stassis, M.J. Kramer, A.I. Goldman and P.C. Canfield, J. Alloys Comp., 303-304, 223 (2000); doi:10.1016/S0925-8388(00)00635-6.
- J.Y. Kim, J.S. Schilling and K.F. Kelton, Solid State Commun., 105, 551 (1998); doi:10.1016/S0038-1098(97)10199-5.
- Y.M. Lee, J.K. Jeon, H.M. Shin and J.Y. Kim, Z. Kristallogr., 224, 67 (2009); doi:10.1524/zkri.2009.1071.
- V. Azhazha, A. Grib, G. Khadzhay, S. Malikhin, B. Merisov and A. Pugachov, Phys. Lett. A, 303, 87 (2002); doi:10.1016/S0375-9601(02)01227-6.
- P. Termsuksawad, S. Niyomsoan, R.B. Goldfarb, V.I. Kaydanov, D.L. Olson, B. Mishra and Z. Gavra, J. Alloys Comp., 373, 86 (2004); doi:10.1016/j.jallcom.2003.10.038.
References
R.M. Stroud, A.M. Viano, P.C. Gibbons, K.F. Kelton and S.T. Misture, Appl. Phys. Lett., 69, 2998 (1996); doi:10.1063/1.117756.
K.F. Kelton, W.J. Kim and R.M. Stroud, Appl. Phys. Lett., 70, 3230 (1997); doi:10.1063/1.119133.
A.M. Viano, R.M. Stroud, P.C. Gibbons, A.F. McDowell, M.S. Conradi and K.F. Kelton, Phys. Rev. B, 51, 12026 (1995); doi:10.1103/PhysRevB.51.12026.
J.Y. Kim, R. Hennig, V.T. Huett, P.C. Gibbons and K.F. Kelton, J. Alloys Comp., 404-406, 388 (2005); doi:10.1016/j.jallcom.2005.02.089.
W.J. Kim and K.F. Kelton, Philos. Mag. A, 72, 1397 (1995); doi:10.1080/01418619508236263.
W.J. Kim and K.F. Kelton, Philos. Mag. Lett., 74, 439 (1996); doi:10.1080/095008396179977.
W.J. Kim, P.C. Gibbons and K.F. Kelton, Philos. Mag. A, 78, 1111 (1998); doi:10.1080/01418619808239978.
A. Sadoc, J.Y. Kim and K.F. Kelton, Philos. Mag. A, 79, 2763 (1999); doi:10.1080/01418619908212022.
S. Nimori, A.P. Tsai and G. Kido, Physica B, 237-238, 565 (1997); doi:10.1016/S0921-4526(97)00250-0.
M. Roy, J. Magn. Magn. Mater., 302, 52 (2006); doi:10.1016/j.jmmm.2005.08.021.
D. Rau, J.L. Gavilano, Sh. Mushkolaj, C. Beeli and H.R. Ott, J. Magn. Magn. Mater., 272-276, 1330 (2004); doi:10.1016/j.jmmm.2003.12.098.
I.R. Fisher, Z. Islam, J. Zarestky, C. Stassis, M.J. Kramer, A.I. Goldman and P.C. Canfield, J. Alloys Comp., 303-304, 223 (2000); doi:10.1016/S0925-8388(00)00635-6.
J.Y. Kim, J.S. Schilling and K.F. Kelton, Solid State Commun., 105, 551 (1998); doi:10.1016/S0038-1098(97)10199-5.
Y.M. Lee, J.K. Jeon, H.M. Shin and J.Y. Kim, Z. Kristallogr., 224, 67 (2009); doi:10.1524/zkri.2009.1071.
V. Azhazha, A. Grib, G. Khadzhay, S. Malikhin, B. Merisov and A. Pugachov, Phys. Lett. A, 303, 87 (2002); doi:10.1016/S0375-9601(02)01227-6.
P. Termsuksawad, S. Niyomsoan, R.B. Goldfarb, V.I. Kaydanov, D.L. Olson, B. Mishra and Z. Gavra, J. Alloys Comp., 373, 86 (2004); doi:10.1016/j.jallcom.2003.10.038.