Copyright (c) 2022 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Different Coating Methods of Titanium Dioxide on Metal Substrates for Orthopedic and Dental Applications: A Review
Corresponding Author(s) : Suja Mathai
Asian Journal of Chemistry,
Vol. 34 No. 1 (2022): Vol 34 Issue 1, 2022
Abstract
The outstanding physico-chemical characteristics to assist bone regeneration and cell development, titanium dioxide (TiO2) based materials have showed significant promise for applications in implants. Due to its excellent performance in a wide variety of applications, chemical stability, and inexpensive cost, this metal oxide has received the more attention. Coating techniques for creating surfaces made of this substance have been thoroughly investigated. The aim of this review article is to look at the current status of TiO2 technology for orthopedic and dental implants. Over the years, researchers have investigated several TiO2 coating deposition techniques on metal implants, with the goal of improving adhesion strength and long-term dependability. This review examines a variety of TiO2 deposition techniques on metal substrates in depth. Anodization, sol-gel method, plasma spray coating, cold spray coating, high velocity oxy-fuel spray, high velocity suspension flame spraying, pulsed laser deposition (PLD), ion beam deposition (IBD), magnetron sputtering deposition, electrophoretic deposition (EPD), electrochemical deposition and biomimetic deposition are among the methods examined.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- Q. Chen and G.A. Thouas, Mater. Sci. Eng. Rep., 87, 1 (2015); https://doi.org/10.1016/j.mser.2014.10.001
- D.F. Williams, Biomaterials, 29, 2941 (2008); https://doi.org/10.1016/j.biomaterials.2008.04.023
- W. Elshahawy, eds.: C. Sikalidis, Biocompatibility, In: Advances in Ceramics - Electric and Magnetic Ceramics, Bioceramics, Ceramics and Environment, Chapt. 15, InTech (2011); https://doi.org/10.5772/726
- R. Murugan and S. Ramakrishna, Compos. Sci. Technol., 65, 2385 (2005); https://doi.org/10.1016/j.compscitech.2005.07.022
- B. Allo, D. Costa, S. Dixon, K. Mequanint and A. Rizkalla, J. Funct. Biomater., 3, 432 (2012); https://doi.org/10.3390/jfb3020432
- B. Richards, Sol. Energy Mater. Sol. Cells, 79, 369 (2003); https://doi.org/10.1016/S0927-0248(02)00473-7
- K. Alvarez and H. Nakajima, Materials, 2, 790 (2009); https://doi.org/10.3390/ma2030790
- X.Q. Zhang, L.H. Yin, T. Tang and Y.P. Pu, Biomed. Environ. Sci., 24, 661 (2011); https://doi.org/10.3967/0895-3988.2011.06.011
- G. Shen, Y. Chen, L. Lin, C. Lin and D. Scantlebury, Electrochim. Acta, 50, 5083 (2005); https://doi.org/10.1016/j.electacta.2005.04.048
- S. Jafari, B. Mahyad, H. Hashemzadeh, S. Janfaza, T. Gholikhani and L. Tayebi, Int. J. Nanomed., 15, 3447 (2020); https://doi.org/10.2147/IJN.S249441
- Z.N. Jameel, A.J. Haider, S.Y. Taha, S. Gangopadhyay and S. Bok, AIP Conf. Proc., 1758, 020001 (2016); https://doi.org/10.1063/1.4959377
- J. Feng, X. Yan, K. Lin, S. Wang, J. Luo and Y. Wu, Mater. Lett., 214, 178 (2018); https://doi.org/10.1016/j.matlet.2017.12.005
- I.E. Shepa, E. Mudra, M. Vojtko, P. Tatarko, V. Girman, O. Milkovic, T. Sopcak, V. Medvecka and J. Dusza, Ceram. Int., 44, 17925 (2018); https://doi.org/10.1016/j.ceramint.2018.06.268
- M. Pelaez, N.T. Nolan, S.C. Pillai, M.K. Seery, P. Falaras, A.G. Kontos, P.S. Dunlop, J.W. Hamilton, J.A. Byrne, K. O’Shea, M.H. Entezari and D.D. Dionysiou, Appl. Catal. B, 125, 331 (2012); https://doi.org/10.1016/j.apcatb.2012.05.036
- A.J. Haider, R.H. Al-Anbari, G.R. Kadhim and C.T. Salame, Energy Procedia, 119, 332 (2017); https://doi.org/10.1016/j.egypro.2017.07.117
- Y. Li, J. Luo, X. Hu, X. Wang, J. Liang and K. Yu, J. Alloys Compd., 651, 685 (2015); https://doi.org/10.1016/j.jallcom.2015.08.168
- P. Roy, S. Berger and P. Schmuki, Angew. Chem. Int. Ed., 50, 2904 (2011); https://doi.org/10.1002/anie.201001374
- B. Sarkar, N. Singhal, R. Goyal, A. Bordoloi, L.N. Sivakumar Konathala, U. Kumar and R. Bal, Catal. Commun., 74, 43 (2016); https://doi.org/10.1016/j.catcom.2015.10.035
- S. Shen, J. Chen, M. Wang, X. Sheng, X. Chen, X. Feng and S.S. Mao, Prog. Mater. Sci., 98, 299 (2018); https://doi.org/10.1016/j.pmatsci.2018.07.006
- J. Singh, S.A. Khan, J. Shah, R. Kotnala and S. Mohapatra, Appl. Surf. Sci., 422, 953 (2017); https://doi.org/10.1016/j.apsusc.2017.06.068
- T. Tao, I.T. Bae, K.B. Woodruff, K. Sauer and J. Cho, Ceram. Int., 45, 23216 (2019); https://doi.org/10.1016/j.ceramint.2019.08.017
- X. Chen and A. Selloni, Chem. Rev., 114, 9281 (2014); https://doi.org/10.1021/cr500422r
- G. Fostad, B. Hafell, A. Førde, R. Dittmann, R. Sabetrasekh, J. Will, J. Ellingsen, S. Lyngstadaas and J. Haugen, Eur. Ceram. Soc., 29, 2773 (2009); https://doi.org/10.1016/j.jeurceramsoc.2009.03.017
- H. Haugen, J. Will, A. Köhler, U. Hopfner, J. Aigner and E. Wintermantel, J. Eur. Ceram. Soc., 24, 661 (2004); https://doi.org/10.1016/S0955-2219(03)00255-3
- T. Kasuga, H. Kondo and M. Nogami, J. Cryst. Growth, 235, 235 (2002); https://doi.org/10.1016/S0022-0248(01)01782-1
- K. Lee, A. Mazare and P. Schmuki, Chem. Rev., 114, 9385 (2014); https://doi.org/10.1021/cr500061m
- H. Nygren, P. Tengvall and I. Lundström, J. Biomed. Mater. Res., 34, 487 (1997); https://doi.org/10.1002/(SICI)1097-4636(19970315)34:4<487::AIDJBM9>3.0.CO;2-G
- Y. Fu and A. Mo, Nanoscale Res. Lett., 13, 187 (2018); https://doi.org/10.1186/s11671-018-2597-z
- M. Garcia-Lobato, A. Mtz-Enriquez, C. Garcia, M. VelazquezManzanares, F. Avalos-Belmontes, R. Ramos-Gonzalez and L. GarciaCerda, Appl. Surf. Sci., 484, 975 (2019); https://doi.org/10.1016/j.apsusc.2019.04.108
- N.K. Awad, S.L. Edwards and Y.S. Morsi, Mater. Sci. Eng. C, 76, 1401 (2017); https://doi.org/10.1016/j.msec.2017.02.150
- L.M. Bjursten, L. Rasmusson, S. Oh, G.C. Smith, K.S. Brammer and S. Jin, J. Biomed. Mater. Res. A, 92, 1218 (2010); https://doi.org/10.1002/jbm.a.32463
- S.M.F. Gad El-Rab, S.A. Fadl-allah and A.A. Montser, Appl. Surf. Sci., 261, 1 (2012); https://doi.org/10.1016/j.apsusc.2012.05.139
- A. Bandyopadhyay, A. Shivaram, I. Mitra and S. Bose, Acta Biomater., 96, 686 (2019); https://doi.org/10.1016/j.actbio.2019.07.028
- K. Cowden, M.F. Dias-Netipanyj and K.C. Popat, Nanomedicine (Lond.), 17, 380 (2019); https://doi.org/10.1016/j.nano.2019.01.008
- F. Visentin, A. Galenda, M. Fabrizio, S. Battiston, N. Brianese, R. Gerbasi, V. Zin and N. El Habra, Appl. Surf. Sci., 490, 568 (2019); https://doi.org/10.1016/j.apsusc.2019.06.067
- T. Wang, Z. Weng, X. Liu, K.W. Yeung, H. Pan and S. Wu, Bioact. Mater., 2, 44 (2017); https://doi.org/10.1016/j.bioactmat.2017.02.001
- M. Enayati-Jazi, M. Solati-Hashjin, A. Nemati and F. Bakhshi, Superlattices Microstruct., 51, 877 (2012); https://doi.org/10.1016/j.spmi.2012.02.013
- A.E. Hannora and S. Ataya, J. Alloys Compd., 658, 222 (2016); https://doi.org/10.1016/j.jallcom.2015.10.240
- H.W. Kim, Y.H. Koh, L.H. Li, S. Lee and H.E. Kim, Biomaterials, 25, 2533 (2004); https://doi.org/10.1016/j.biomaterials.2003.09.041
- Anushika, P. Sharma, A. Trivedi and H. Begam, Mater. Today Proc., 16, 302 (2019); https://doi.org/10.1016/j.matpr.2019.05.094
- C. Frandsen, K. Noh, K. Brammer, G. Johnston and S. Jin, Mater. Sci. Eng. C, 33, 2752 (2013); https://doi.org/10.1016/j.msec.2013.02.045
- L. Bao, J. Liu, F. Shi, Y. Jiang and G. Liu, Appl. Surf. Sci., 290, 48 (2014); https://doi.org/10.1016/j.apsusc.2013.10.185
- M. Mirak, M. Alizadeh, M. Ghaffari and M. Ashtiani, J. Mech. Behav. Biomed. Mater., 62, 282 (2016); https://doi.org/10.1016/j.jmbbm.2016.05.016
- D. Pradhan, A. Wren, S. Misture and N. Mellott, Mater. Sci. Eng. C, 58, 918 (2016); https://doi.org/10.1016/j.msec.2015.09.059
- H. Fukuda and Y. Matsumoto, Electrochim. Acta, 50, 5329 (2005); https://doi.org/10.1016/j.electacta.2005.03.010
- Y. Ohko, S. Saitoh, T. Tatsuma and A. Fujishima, J. Electrochem. Soc., 148, B24 (2001); https://doi.org/10.1149/1.1339030
- A. Majeed, J. He, L. Jiao, X. Zhong and Z. Sheng, Nanoscale Res. Lett., 10, 56 (2015); https://doi.org/10.1186/s11671-015-0732-7
- L. Bait, L. Azzouz, N. Madaoui and N. Saoula, Appl. Surf. Sci., 395, 72 (2017); https://doi.org/10.1016/j.apsusc.2016.07.101
- D.S.R. Krishna and Y. Sun, Appl. Surf. Sci., 252, 1107 (2005); https://doi.org/10.1016/j.apsusc.2005.02.046
- G. Shen, Y. Chen, L. Lin, C. Lin and D. Scantlebury, Electrochim. Acta, 50, 5083 (2005); https://doi.org/10.1016/j.electacta.2005.04.048
- L. Bamoulid, M.-T. Maurette, D. De Caro, A. Guenbour, A. Ben Bachir, L. Aries, S. El Hajjaji, F. Benoît-Marquié and F. Ansart, Surf. Coat. Technol., 202, 5020 (2008); https://doi.org/10.1016/j.surfcoat.2008.05.011
- C. Shan, X. Hou and K.L. Choy, Surf. Coat. Technol., 202, 2399 (2008); https://doi.org/10.1016/j.surfcoat.2007.08.066
- T. Liu, F. Zhang, C. Xue, L. Li and Y. Yin, Surf. Coat. Technol., 205, 2335 (2010); https://doi.org/10.1016/j.surfcoat.2010.09.028
- S. Berger, R. Hahn, P. Roy and P. Schmuki, Phys. Status Solidi, Basic Res., 247, 2424 (2010); https://doi.org/10.1002/pssb.201046373
- A.B. Neta, M.F. Mota, H.L. Lira, G.A. Neves and R.R. Menezes, Ceramica, 66, 440 (2020); https://doi.org/10.1590/0366-69132020663802905
- K. Indira, U.K. Mudali, T. Nishimura and N. Rajendran, J. Bio. Tribo. Corros., 1, 28 (2015); https://doi.org/10.1007/s40735-015-0024-x
- Y. Alivov, M. Pandikunta, S. Nikishin and Z.Y. Fan, Nanotechnology, 20, 225602 (2009); https://doi.org/10.1088/0957-4484/20/22/225602
- J.E. Yoo and P. Schmuki, J. Electrochem. Soc., 166, C3389 (2019); https://doi.org/10.1149/2.0381911jes
- M. Tak, H. Tomar and R.G. Mote, Procedia CIRP, 95, 803 (2020); https://doi.org/10.1016/j.procir.2020.01.140
- J. Harle, H. Kim, N. Mordan, J. Knowles and V. Salih, Acta Biomater., 2, 547 (2006); https://doi.org/10.1016/j.actbio.2006.05.005
- A. Dehghanghadikolaei, J. Ansary and R. Ghoreishi, Proc. Nat. Res. Soc., 2, 02008 (2018).
- X. Wang, F. Shi, X. Gao, C. Fan, W. Huang and X. Feng, Thin Solid Films, 548, 34 (2013); https://doi.org/10.1016/j.tsf.2013.08.056
- M. Advincula, F. Rahemtulla, R. Advincula, E. Ada, J. Lemons and S. Bellis, Biomaterials, 27, 2201 (2006); https://doi.org/10.1016/j.biomaterials.2005.11.014
- H. Paldan, S. Areva, T. Tirri, T. Peltola, T. Lindholm, L. Lassila, L. Pelliniemi, R.-P. Happonen and T.O. Närhi, J. Mater. Sci. Mater. Med., 19, 1283 (2008); https://doi.org/10.1007/s10856-007-3234-z
- A. Ochsenbein, F. Chai, S. Winter, M. Traisnel, J. Breme and H. Hildebrand, Acta Biomater., 4, 1506 (2008); https://doi.org/10.1016/j.actbio.2008.03.012
- S. Areva, H. Paldan, N.T. Peltola, M. Jokinen and M. Lindén, J. Biomed. Mater. Res. A, 70, 169 (2004); https://doi.org/10.1002/jbm.a.20120
- L. Guo, W. Feng and X. Liu, Mater. Lett., 160, 448 (2015); https://doi.org/10.1016/j.matlet.2015.08.027
- G. Fu, P. Vary and C. Lin, J. Phys. Chem. B, 109, 8889 (2005); https://doi.org/10.1021/jp0502196
- A. Kubacka, M. Diez, D. Rojo, R. Bargiela, S. Ciordia, I. Zapico, J. Albar, C. Barbas, V.A.P. Martins Dos Santos, M. Fernande-Garcia and M. Ferrer, Sci. Rep., 4, 4134 (2014); https://doi.org/10.1038/srep04134
- A.E. Danks, S.R. Hall and Z. Schnepp, Mater. Horiz., 3, 91 (2016); https://doi.org/10.1039/C5MH00260E
- M. Gardon and J.M. Guilemany, J. Therm. Spray Technol., 23, 577 (2014); https://doi.org/10.1007/s11666-014-0066-5
- A. Dehghanghadikolaei and B. Fotovvati, Materials, 12, 1795 (2019); https://doi.org/10.3390/ma12111795
- A. Jemat, M.J. Ghazali, M. Razali, Y. Otsuka and A. Rajabi, Ceram. Int., 44, 4271 (2018); https://doi.org/10.1016/j.ceramint.2017.12.008
- R.S. Pillai, M. Frasnelli and V.M. Sglavo, Ceram. Int., 44, 1328 (2018); https://doi.org/10.1016/j.ceramint.2017.08.113
- R. Narayanan, S.K. Seshadri, T.Y. Kwon and K.H. Kim, J. Biomed. Mater. Res. B Appl. Biomater., 85, 279 (2008); https://doi.org/10.1002/jbm.b.30932
- K. Ahmed and M. Shoeib, Sch. J. Appl. Sci. Res., 1, 20 (2018).
- H. Gutzmann, S. Freese, F. Gartner and T. Klassen, J. Therm. Spray Technol., 20, 292 (2011); https://doi.org/10.1007/s11666-010-9563-3
- N.I. Omar, S. Selvami, M. Kaisho, M. Yamada, T. Yasui and M. Fukumoto, Coatings, 10, 991 (2020); https://doi.org/10.3390/coatings10100991
- P. Poza and M.A. Garrido-Maneiro, Prog. Mater. Sci., 123, 100839 (2022); https://doi.org/10.1016/j.pmatsci.2021.100839
- S. Pathak and G.C. Saha, Coatings, 7, 122 (2017); https://doi.org/10.3390/coatings7080122
- M. Winnicki, A. Baszczuk, M. Jasiorski, B. Borak and A. Malachowska, Surf. Coat. Technol., 371, 194 (2019); https://doi.org/10.1016/j.surfcoat.2018.09.057
- K. Schmidt, S. Buhl, N. Davoudi, C. Godard, R. Merz, I. Raid, E. Kerscher, M. Kopnarski, C. Müller-Renno, S. Ripperger, J. Seewig, C. Ziegler and S. Antonyuk, Surf. Coat. Technol., 309, 749 (2017); https://doi.org/10.1016/j.surfcoat.2016.10.091
- J.O. Kliemann, H. Gutzmann, F. Gärtner, H. Hübner, C. Borchers and T. Klassen, J. Therm. Spray Technol., 20, 292 (2011); https://doi.org/10.1007/s11666-010-9563-3
- H. Hajipour, A. Abdollah-Zadeh, H. Assadi, E. Taheri-Nassaj and H. Jahed, J. Therm. Spray Technol., 27, 1542 (2018); https://doi.org/10.1007/s11666-018-0782-3
- T. Hussain, Key Eng. Mater., 533, 53 (2013); https://doi.org/10.4028/www.scientific.net/KEM.533.53
- S. Kamnis and S. Gu, Chem. Eng. Sci., 61, 5427 (2006); https://doi.org/10.1016/j.ces.2006.04.005
- J.A. Hearley and J.A. Little, Surf. Coat. Technol., 33, 671 (2000).
- M. Li and P.D. Christofides, Chem. Eng. Sci., 58, 849 (2003); https://doi.org/10.1016/S0009-2509(02)00616-4
- G.J. Yang, C.J. Li, F. Han and A. Ohmori, Thin Solid Films, 466, 81 (2004); https://doi.org/10.1016/j.tsf.2004.02.015
- M. Bozorgtabar and M. Jafarpour, Am. J. Eng. Res., 4, 82 (2015).
- C. -J. Li, G.-J. Yang, Y.-Y. Wang, C.-X. Li, F.-X. Ye and A. Ohmori, Mater. Trans., 47, 1690 (2006); https://doi.org/10.2320/matertrans.47.1690
- M. Bozorgtabar, M. Rahimipour and M. Salehi, Mater. Lett., 64, 1173 (2010); https://doi.org/10.1016/j.matlet.2010.02.042
- M. Li and P.D. Christofides, J. Therm. Spray Technol., 18, 753 (2009); https://doi.org/10.1007/s11666-009-9309-2
- N. Stiegler, D. Bellucci, G. Bolelli, V. Cannillo, R. Gadow, A. Killinger, L. Lusvarghi and A. Sola, J. Therm. Spray Technol., 21, 275 (2012); https://doi.org/10.1007/s11666-011-9724-z
- H. Li, K. Khor and P. Cheang, Biomaterials, 23, 85 (2002); https://doi.org/10.1016/S0142-9612(01)00082-5
- G. Bolelli, R. Giovanardi, L. Lusvarghi and T. Manfredini, Corros. Sci., 48, 3375 (2006); https://doi.org/10.1016/j.corsci.2006.03.001
- Z.G. Ban and L.L. Shaw, J. Spray Technol., 12, 112 (2003); https://doi.org/10.1361/105996303770348564
- L. Visai, L. De Nardo, C. Punta, L. Melone, A. Cigada, M. Imbriani and C.R. Arciola, Int. J. Artif. Organs, 34, 929 (2011); https://doi.org/10.5301/ijao.5000050
- B. Song, Z. Pala, K. Voisey and T. Hussain, Surf. Coat. Technol., 318, 224 (2017); https://doi.org/10.1016/j.surfcoat.2016.07.046
- R.B. Heimann and H.D. Lehmann, Bioceramic Coatings for Medical Implants: Trends and Techniques, Wiley, Chap. 6, pp 253-294 (2015).
- G. Bolelli, R. Cannillo, R. Gadow, A. Killinger, L. Lusvarghi and J. Rauch, Surf. Coat. Technol., 203, 1722 (2009);
- https://doi.org/10.1016/j.surfcoat.2009.01.006
- R. Gadow, A. Killinger and J. Rauch, J. Therm. Spray Technol., 17, 655 (2008); https://doi.org/10.1007/s11666-008-9264-3
- U. Brohede, J. Forsgren, S. Roos, A. Mihranyan, H. Engqvist and M. Strømme, J. Mater. Sci. Mater. Med., 20, 1859 (2009); https://doi.org/10.1007/s10856-009-3749-6
- B.M. Kang, W.J. Jeong, G.C. Park, D.J. Yoon, H.G. Ahn and Y.S. Lim, J. Nanosci. Nanotechnol., 15, 6020 (2015); https://doi.org/10.1166/jnn.2015.10417
- J.M. Lackner, W. Waldhauser, R. Ebner, B. Major and T. Schoberl, Surf. Coat. Technol., 180-181, 585 (2004); https://doi.org/10.1016/j.surfcoat.2003.10.099
- S. Murugesan, P. Kuppusami, N. Parvathavarthini and E. Mohandas, Surf. Coat. Technol., 201, 7713 (2007); https://doi.org/10.1016/j.surfcoat.2007.03.004
- M. Filipescu, A. Palla-Papavlu and D. Maria, Functional Metal Oxide Thin Films Grown by Pulsed Laser Deposition, Crystalline and Noncrystalline Solids, IntechOpen (2016); https://doi.org/10.5772/62986
- E. Bogdanov, Y. Vavllina, N. Shusharina, A. Goykhman and M. Patrushev, J. Nanomed. Nanotechnol., 5, 1 (2014); https://doi.org/10.4172/2157-7439.1000189
- M.K. Ji, S.W. Park, K. Lee, I.C. Kang, K.D. Yun, H.S. Kim and H.P. Lim, J. Adv. Prosthodont., 7, 166 (2015); https://doi.org/10.4047/jap.2015.7.2.166
- K.S. Novoselov, A.K. Geim, S.V. Morozov, D. Jiang, Y. Zhang, S.V. Dubonos, A.A. Grigorieva IV and A.A. Firsov, Science, 306, 666 (2004); https://doi.org/10.1126/science.1102896
- N. Ohtsu, K. Saito, K. Asami and T. Hanawa, Surf. Coat. Technol., 200, 5455 (2006); https://doi.org/10.1016/j.surfcoat.2005.07.003
- M. Hamdi and A. Ide-Ektessabi, Surf. Coat. Technol., 163-164, 362 (2003); https://doi.org/10.1016/S0257-8972(02)00625-4
- Z.S. Luo, F.Z. Cui, Q.L. Feng, H.D. Li, X.D. Zhu and M. Spector, Hamdi and A. Ide-Ektessabi, Surf. Coat. Technol., 163-164, 362 (2003); https://doi.org/10.1016/S0257-8972(02)00625-4
- Z.S. Luo, F.Z. Cui, Q.L. Feng, H.D. Li, X.D. Zhu and M. Spector, Surf. Coat. Technol., 131, 192 (2000); https://doi.org/10.1016/S0257-8972(00)00824-0
- S. Boukrouh, R. Bensaha, S. Bourgeois, E. Finot and M.C. Marco de Lucas, Thin Solid Films, 516, 6353 (2008); https://doi.org/10.1016/j.tsf.2007.12.150
- S. Davidsdóttir, R. Shabadi, A.C. Galca, I.H. Andersen, K. Dirscherl and R. Ambat, Appl. Surf. Sci., 313, 677 (2014); https://doi.org/10.1016/j.apsusc.2014.06.047
- C.J. Tavares, J. Vieira, L. Rebouta, G. Hungerford, P. Coutinho, V. Teixeira, J.O. Carneiro and A.J. Fernandes, Mater. Sci. Eng. B-Solid State Mater. Adv. Technol., 138, 139 (2007); https://doi.org/10.1016/j.mseb.2005.11.043
- W. Schönberger, H. Bartzsch, S. Schippel and T. Bachmann, Surf. Coat. Technol., 293, 16 (2016); https://doi.org/10.1016/j.surfcoat.2015.12.073
- X. Wang, F. Prokert, H. Reuther, M.F. Maitz and F. Zhang, Surf. Coat. Technol., 185, 12 (2004); https://doi.org/10.1016/j.surfcoat.2003.12.002
- W. Schönberger, H. Bartzsch, S. Schippel and T. Bachmann, Surf. Coat. Technol., 293, 16 (2016); https://doi.org/10.1016/j.surfcoat.2015.12.073
- A.Y. Goikhman, S.A. Sheludyakov and E.A. Bogdanov, J. Novel Mater.: Coats Nanoeng., 674, 195 (2011); https://doi.org/10.4028/www.scientific.net/MSF.674.195
- J. Xu, Y. Li, X. Zhou, Y. Li, Z.D. Gao, Y.Y. Song and P. Schmuki, Chem. Eur. J., 22, 3947 (2016); https://doi.org/10.1002/chem.201505173
- S. Reghunath, D. Pinheiro and K.R. Sunaja Devi, App. Surf. Sci. Adv., 3, 100063 (2021); https://doi.org/10.1016/j.apsadv.2021.100063
- L. Besra and M. Liu, Progr. Mater. Sci., 52, 1 (2007); https://doi.org/10.1016/j.pmatsci.2006.07.001
- I. Gibson and W. Bonfield, J. Mater. Sci. Mater. Med., 13, 685 (2002); https://doi.org/10.1023/A:1015793927364
- H. Shalom, Y. Feldman, R. Rosentsveig, I. Pinkas, I. Kaplan-Ashiri, A. Moshkovich, V. Perfilyev, L. Rapoport and R. Tenne, Int. J. Mol. Sci., 19, 657 (2018); https://doi.org/10.3390/ijms19030657
- D.H. He, P. Wang, P. Liu, X.K. Liu, F.C. Ma and J. Zhao, Surf. Coat. Technol., 301, 6 (2016); https://doi.org/10.1016/j.surfcoat.2016.07.005
- L. Yan, Y. Xiang, J. Yu, Y. Wang and W. Cui, ACS Appl. Mater. Interfaces, 9, 5023 (2017); https://doi.org/10.1021/acsami.6b15979
- B. Bakin, T. Koc Delice, U. Tiric, I. Birlik and F. Ak Azem, Surf. Coat. Technol., 301, 29 (2016); https://doi.org/10.1016/j.surfcoat.2015.12.078
- R. Chakraborty, V.S. Seesala, S. Sengupta, S. Dhara, P. Saha, K. Das and S. Das, Surf. Interfaces, 10, 1 (2018); https://doi.org/10.1016/j.surfin.2017.11.002
- X. Zhao, T. Hu, H. Li, M. Chen, S. Cao, L. Zhang and X. Hou, Appl. Surf. Sci., 257, 3612 (2011); https://doi.org/10.1016/j.apsusc.2010.11.088
- A. Tahmasbi Rad, M. Solati-Hashjin, N.A.A. Osman and S. Faghihi, Ceram. Int., 40, 12681 (2014); https://doi.org/10.1016/j.ceramint.2014.04.116
- M. Sankar, S. Suwas, S. Balasubramanian and G. Manivasagam, Surf. Coat. Technol., 309, 840 (2017); https://doi.org/10.1016/j.surfcoat.2016.10.077
- T. Kokubo, H. Kushitani, S. Sakka, T. Kitsugi and T. Yamamuro, J. Biomed. Mater. Res., 24, 721 (1990); https://doi.org/10.1002/jbm.820240607
- A.L. Escada, J.P.B. Machado, S.G. Schneider, M.C.R.A. Rezende and A.P.R.A. Claro, J. Mater. Sci. Mater. Electron., 22, 2457 (2011); https://doi.org/10.1007/s10856-011-4434-0
- W. Xia, C. Lindahl, J. Lausmaa, P. Borchardt, A. Ballo, P. Thomsen and H. Engqvist, Acta Biomater., 6, 1591 (2010); https://doi.org/10.1016/j.actbio.2009.10.030
- B. Burnat, J. Robak, A. Leniart, I. Piwoñski and D. Batory, Ceram. Int., 43, 13735 (2017); https://doi.org/10.1016/j.ceramint.2017.07.086
- B. Burnat, J. Robak, D. Batory, A. Leniart, I. Piwoñski, S. Skrzypek and M. Brycht, Surf. Coat. Technol., 280, 291 (2015); https://doi.org/10.1016/j.surfcoat.2015.09.018
- J. Coreño, A. Martínez, O.A. Coreño, A. Bolarín and F. Sánchez, J. Biomed. Mater. Res. A, 64, 131 (2003); https://doi.org/10.1002/jbm.a.10395
- M. Uchida, H.M. Kim, T. Kokubo, S. Fujibayashi and T. Nakamura, J. Biomed. Mater. Res. A, 64, 164 (2003); https://doi.org/10.1002/jbm.a.10414
- T. Peltola, M. Jokinen, H. Rahiala, J.I. Heikkilä, I. Kangasniemi, M. Pätsi and A. Yli-Urpo, J. Biomed. Mater. Res., 51, 200 (2000); https://doi.org/10.1002/(SICI)1097-4636(200008)51:2<200::AIDJBM8>3.0.CO;2-Z
- P. Li, C. Ohtsuki, T. Kokubo, K. Nakanishi, N. Soga and K. deGroot, J. Biomed. Mater. Res., 28, 7 (1994); https://doi.org/10.1002/jbm.820280103
References
Q. Chen and G.A. Thouas, Mater. Sci. Eng. Rep., 87, 1 (2015); https://doi.org/10.1016/j.mser.2014.10.001
D.F. Williams, Biomaterials, 29, 2941 (2008); https://doi.org/10.1016/j.biomaterials.2008.04.023
W. Elshahawy, eds.: C. Sikalidis, Biocompatibility, In: Advances in Ceramics - Electric and Magnetic Ceramics, Bioceramics, Ceramics and Environment, Chapt. 15, InTech (2011); https://doi.org/10.5772/726
R. Murugan and S. Ramakrishna, Compos. Sci. Technol., 65, 2385 (2005); https://doi.org/10.1016/j.compscitech.2005.07.022
B. Allo, D. Costa, S. Dixon, K. Mequanint and A. Rizkalla, J. Funct. Biomater., 3, 432 (2012); https://doi.org/10.3390/jfb3020432
B. Richards, Sol. Energy Mater. Sol. Cells, 79, 369 (2003); https://doi.org/10.1016/S0927-0248(02)00473-7
K. Alvarez and H. Nakajima, Materials, 2, 790 (2009); https://doi.org/10.3390/ma2030790
X.Q. Zhang, L.H. Yin, T. Tang and Y.P. Pu, Biomed. Environ. Sci., 24, 661 (2011); https://doi.org/10.3967/0895-3988.2011.06.011
G. Shen, Y. Chen, L. Lin, C. Lin and D. Scantlebury, Electrochim. Acta, 50, 5083 (2005); https://doi.org/10.1016/j.electacta.2005.04.048
S. Jafari, B. Mahyad, H. Hashemzadeh, S. Janfaza, T. Gholikhani and L. Tayebi, Int. J. Nanomed., 15, 3447 (2020); https://doi.org/10.2147/IJN.S249441
Z.N. Jameel, A.J. Haider, S.Y. Taha, S. Gangopadhyay and S. Bok, AIP Conf. Proc., 1758, 020001 (2016); https://doi.org/10.1063/1.4959377
J. Feng, X. Yan, K. Lin, S. Wang, J. Luo and Y. Wu, Mater. Lett., 214, 178 (2018); https://doi.org/10.1016/j.matlet.2017.12.005
I.E. Shepa, E. Mudra, M. Vojtko, P. Tatarko, V. Girman, O. Milkovic, T. Sopcak, V. Medvecka and J. Dusza, Ceram. Int., 44, 17925 (2018); https://doi.org/10.1016/j.ceramint.2018.06.268
M. Pelaez, N.T. Nolan, S.C. Pillai, M.K. Seery, P. Falaras, A.G. Kontos, P.S. Dunlop, J.W. Hamilton, J.A. Byrne, K. O’Shea, M.H. Entezari and D.D. Dionysiou, Appl. Catal. B, 125, 331 (2012); https://doi.org/10.1016/j.apcatb.2012.05.036
A.J. Haider, R.H. Al-Anbari, G.R. Kadhim and C.T. Salame, Energy Procedia, 119, 332 (2017); https://doi.org/10.1016/j.egypro.2017.07.117
Y. Li, J. Luo, X. Hu, X. Wang, J. Liang and K. Yu, J. Alloys Compd., 651, 685 (2015); https://doi.org/10.1016/j.jallcom.2015.08.168
P. Roy, S. Berger and P. Schmuki, Angew. Chem. Int. Ed., 50, 2904 (2011); https://doi.org/10.1002/anie.201001374
B. Sarkar, N. Singhal, R. Goyal, A. Bordoloi, L.N. Sivakumar Konathala, U. Kumar and R. Bal, Catal. Commun., 74, 43 (2016); https://doi.org/10.1016/j.catcom.2015.10.035
S. Shen, J. Chen, M. Wang, X. Sheng, X. Chen, X. Feng and S.S. Mao, Prog. Mater. Sci., 98, 299 (2018); https://doi.org/10.1016/j.pmatsci.2018.07.006
J. Singh, S.A. Khan, J. Shah, R. Kotnala and S. Mohapatra, Appl. Surf. Sci., 422, 953 (2017); https://doi.org/10.1016/j.apsusc.2017.06.068
T. Tao, I.T. Bae, K.B. Woodruff, K. Sauer and J. Cho, Ceram. Int., 45, 23216 (2019); https://doi.org/10.1016/j.ceramint.2019.08.017
X. Chen and A. Selloni, Chem. Rev., 114, 9281 (2014); https://doi.org/10.1021/cr500422r
G. Fostad, B. Hafell, A. Førde, R. Dittmann, R. Sabetrasekh, J. Will, J. Ellingsen, S. Lyngstadaas and J. Haugen, Eur. Ceram. Soc., 29, 2773 (2009); https://doi.org/10.1016/j.jeurceramsoc.2009.03.017
H. Haugen, J. Will, A. Köhler, U. Hopfner, J. Aigner and E. Wintermantel, J. Eur. Ceram. Soc., 24, 661 (2004); https://doi.org/10.1016/S0955-2219(03)00255-3
T. Kasuga, H. Kondo and M. Nogami, J. Cryst. Growth, 235, 235 (2002); https://doi.org/10.1016/S0022-0248(01)01782-1
K. Lee, A. Mazare and P. Schmuki, Chem. Rev., 114, 9385 (2014); https://doi.org/10.1021/cr500061m
H. Nygren, P. Tengvall and I. Lundström, J. Biomed. Mater. Res., 34, 487 (1997); https://doi.org/10.1002/(SICI)1097-4636(19970315)34:4<487::AIDJBM9>3.0.CO;2-G
Y. Fu and A. Mo, Nanoscale Res. Lett., 13, 187 (2018); https://doi.org/10.1186/s11671-018-2597-z
M. Garcia-Lobato, A. Mtz-Enriquez, C. Garcia, M. VelazquezManzanares, F. Avalos-Belmontes, R. Ramos-Gonzalez and L. GarciaCerda, Appl. Surf. Sci., 484, 975 (2019); https://doi.org/10.1016/j.apsusc.2019.04.108
N.K. Awad, S.L. Edwards and Y.S. Morsi, Mater. Sci. Eng. C, 76, 1401 (2017); https://doi.org/10.1016/j.msec.2017.02.150
L.M. Bjursten, L. Rasmusson, S. Oh, G.C. Smith, K.S. Brammer and S. Jin, J. Biomed. Mater. Res. A, 92, 1218 (2010); https://doi.org/10.1002/jbm.a.32463
S.M.F. Gad El-Rab, S.A. Fadl-allah and A.A. Montser, Appl. Surf. Sci., 261, 1 (2012); https://doi.org/10.1016/j.apsusc.2012.05.139
A. Bandyopadhyay, A. Shivaram, I. Mitra and S. Bose, Acta Biomater., 96, 686 (2019); https://doi.org/10.1016/j.actbio.2019.07.028
K. Cowden, M.F. Dias-Netipanyj and K.C. Popat, Nanomedicine (Lond.), 17, 380 (2019); https://doi.org/10.1016/j.nano.2019.01.008
F. Visentin, A. Galenda, M. Fabrizio, S. Battiston, N. Brianese, R. Gerbasi, V. Zin and N. El Habra, Appl. Surf. Sci., 490, 568 (2019); https://doi.org/10.1016/j.apsusc.2019.06.067
T. Wang, Z. Weng, X. Liu, K.W. Yeung, H. Pan and S. Wu, Bioact. Mater., 2, 44 (2017); https://doi.org/10.1016/j.bioactmat.2017.02.001
M. Enayati-Jazi, M. Solati-Hashjin, A. Nemati and F. Bakhshi, Superlattices Microstruct., 51, 877 (2012); https://doi.org/10.1016/j.spmi.2012.02.013
A.E. Hannora and S. Ataya, J. Alloys Compd., 658, 222 (2016); https://doi.org/10.1016/j.jallcom.2015.10.240
H.W. Kim, Y.H. Koh, L.H. Li, S. Lee and H.E. Kim, Biomaterials, 25, 2533 (2004); https://doi.org/10.1016/j.biomaterials.2003.09.041
Anushika, P. Sharma, A. Trivedi and H. Begam, Mater. Today Proc., 16, 302 (2019); https://doi.org/10.1016/j.matpr.2019.05.094
C. Frandsen, K. Noh, K. Brammer, G. Johnston and S. Jin, Mater. Sci. Eng. C, 33, 2752 (2013); https://doi.org/10.1016/j.msec.2013.02.045
L. Bao, J. Liu, F. Shi, Y. Jiang and G. Liu, Appl. Surf. Sci., 290, 48 (2014); https://doi.org/10.1016/j.apsusc.2013.10.185
M. Mirak, M. Alizadeh, M. Ghaffari and M. Ashtiani, J. Mech. Behav. Biomed. Mater., 62, 282 (2016); https://doi.org/10.1016/j.jmbbm.2016.05.016
D. Pradhan, A. Wren, S. Misture and N. Mellott, Mater. Sci. Eng. C, 58, 918 (2016); https://doi.org/10.1016/j.msec.2015.09.059
H. Fukuda and Y. Matsumoto, Electrochim. Acta, 50, 5329 (2005); https://doi.org/10.1016/j.electacta.2005.03.010
Y. Ohko, S. Saitoh, T. Tatsuma and A. Fujishima, J. Electrochem. Soc., 148, B24 (2001); https://doi.org/10.1149/1.1339030
A. Majeed, J. He, L. Jiao, X. Zhong and Z. Sheng, Nanoscale Res. Lett., 10, 56 (2015); https://doi.org/10.1186/s11671-015-0732-7
L. Bait, L. Azzouz, N. Madaoui and N. Saoula, Appl. Surf. Sci., 395, 72 (2017); https://doi.org/10.1016/j.apsusc.2016.07.101
D.S.R. Krishna and Y. Sun, Appl. Surf. Sci., 252, 1107 (2005); https://doi.org/10.1016/j.apsusc.2005.02.046
G. Shen, Y. Chen, L. Lin, C. Lin and D. Scantlebury, Electrochim. Acta, 50, 5083 (2005); https://doi.org/10.1016/j.electacta.2005.04.048
L. Bamoulid, M.-T. Maurette, D. De Caro, A. Guenbour, A. Ben Bachir, L. Aries, S. El Hajjaji, F. Benoît-Marquié and F. Ansart, Surf. Coat. Technol., 202, 5020 (2008); https://doi.org/10.1016/j.surfcoat.2008.05.011
C. Shan, X. Hou and K.L. Choy, Surf. Coat. Technol., 202, 2399 (2008); https://doi.org/10.1016/j.surfcoat.2007.08.066
T. Liu, F. Zhang, C. Xue, L. Li and Y. Yin, Surf. Coat. Technol., 205, 2335 (2010); https://doi.org/10.1016/j.surfcoat.2010.09.028
S. Berger, R. Hahn, P. Roy and P. Schmuki, Phys. Status Solidi, Basic Res., 247, 2424 (2010); https://doi.org/10.1002/pssb.201046373
A.B. Neta, M.F. Mota, H.L. Lira, G.A. Neves and R.R. Menezes, Ceramica, 66, 440 (2020); https://doi.org/10.1590/0366-69132020663802905
K. Indira, U.K. Mudali, T. Nishimura and N. Rajendran, J. Bio. Tribo. Corros., 1, 28 (2015); https://doi.org/10.1007/s40735-015-0024-x
Y. Alivov, M. Pandikunta, S. Nikishin and Z.Y. Fan, Nanotechnology, 20, 225602 (2009); https://doi.org/10.1088/0957-4484/20/22/225602
J.E. Yoo and P. Schmuki, J. Electrochem. Soc., 166, C3389 (2019); https://doi.org/10.1149/2.0381911jes
M. Tak, H. Tomar and R.G. Mote, Procedia CIRP, 95, 803 (2020); https://doi.org/10.1016/j.procir.2020.01.140
J. Harle, H. Kim, N. Mordan, J. Knowles and V. Salih, Acta Biomater., 2, 547 (2006); https://doi.org/10.1016/j.actbio.2006.05.005
A. Dehghanghadikolaei, J. Ansary and R. Ghoreishi, Proc. Nat. Res. Soc., 2, 02008 (2018).
X. Wang, F. Shi, X. Gao, C. Fan, W. Huang and X. Feng, Thin Solid Films, 548, 34 (2013); https://doi.org/10.1016/j.tsf.2013.08.056
M. Advincula, F. Rahemtulla, R. Advincula, E. Ada, J. Lemons and S. Bellis, Biomaterials, 27, 2201 (2006); https://doi.org/10.1016/j.biomaterials.2005.11.014
H. Paldan, S. Areva, T. Tirri, T. Peltola, T. Lindholm, L. Lassila, L. Pelliniemi, R.-P. Happonen and T.O. Närhi, J. Mater. Sci. Mater. Med., 19, 1283 (2008); https://doi.org/10.1007/s10856-007-3234-z
A. Ochsenbein, F. Chai, S. Winter, M. Traisnel, J. Breme and H. Hildebrand, Acta Biomater., 4, 1506 (2008); https://doi.org/10.1016/j.actbio.2008.03.012
S. Areva, H. Paldan, N.T. Peltola, M. Jokinen and M. Lindén, J. Biomed. Mater. Res. A, 70, 169 (2004); https://doi.org/10.1002/jbm.a.20120
L. Guo, W. Feng and X. Liu, Mater. Lett., 160, 448 (2015); https://doi.org/10.1016/j.matlet.2015.08.027
G. Fu, P. Vary and C. Lin, J. Phys. Chem. B, 109, 8889 (2005); https://doi.org/10.1021/jp0502196
A. Kubacka, M. Diez, D. Rojo, R. Bargiela, S. Ciordia, I. Zapico, J. Albar, C. Barbas, V.A.P. Martins Dos Santos, M. Fernande-Garcia and M. Ferrer, Sci. Rep., 4, 4134 (2014); https://doi.org/10.1038/srep04134
A.E. Danks, S.R. Hall and Z. Schnepp, Mater. Horiz., 3, 91 (2016); https://doi.org/10.1039/C5MH00260E
M. Gardon and J.M. Guilemany, J. Therm. Spray Technol., 23, 577 (2014); https://doi.org/10.1007/s11666-014-0066-5
A. Dehghanghadikolaei and B. Fotovvati, Materials, 12, 1795 (2019); https://doi.org/10.3390/ma12111795
A. Jemat, M.J. Ghazali, M. Razali, Y. Otsuka and A. Rajabi, Ceram. Int., 44, 4271 (2018); https://doi.org/10.1016/j.ceramint.2017.12.008
R.S. Pillai, M. Frasnelli and V.M. Sglavo, Ceram. Int., 44, 1328 (2018); https://doi.org/10.1016/j.ceramint.2017.08.113
R. Narayanan, S.K. Seshadri, T.Y. Kwon and K.H. Kim, J. Biomed. Mater. Res. B Appl. Biomater., 85, 279 (2008); https://doi.org/10.1002/jbm.b.30932
K. Ahmed and M. Shoeib, Sch. J. Appl. Sci. Res., 1, 20 (2018).
H. Gutzmann, S. Freese, F. Gartner and T. Klassen, J. Therm. Spray Technol., 20, 292 (2011); https://doi.org/10.1007/s11666-010-9563-3
N.I. Omar, S. Selvami, M. Kaisho, M. Yamada, T. Yasui and M. Fukumoto, Coatings, 10, 991 (2020); https://doi.org/10.3390/coatings10100991
P. Poza and M.A. Garrido-Maneiro, Prog. Mater. Sci., 123, 100839 (2022); https://doi.org/10.1016/j.pmatsci.2021.100839
S. Pathak and G.C. Saha, Coatings, 7, 122 (2017); https://doi.org/10.3390/coatings7080122
M. Winnicki, A. Baszczuk, M. Jasiorski, B. Borak and A. Malachowska, Surf. Coat. Technol., 371, 194 (2019); https://doi.org/10.1016/j.surfcoat.2018.09.057
K. Schmidt, S. Buhl, N. Davoudi, C. Godard, R. Merz, I. Raid, E. Kerscher, M. Kopnarski, C. Müller-Renno, S. Ripperger, J. Seewig, C. Ziegler and S. Antonyuk, Surf. Coat. Technol., 309, 749 (2017); https://doi.org/10.1016/j.surfcoat.2016.10.091
J.O. Kliemann, H. Gutzmann, F. Gärtner, H. Hübner, C. Borchers and T. Klassen, J. Therm. Spray Technol., 20, 292 (2011); https://doi.org/10.1007/s11666-010-9563-3
H. Hajipour, A. Abdollah-Zadeh, H. Assadi, E. Taheri-Nassaj and H. Jahed, J. Therm. Spray Technol., 27, 1542 (2018); https://doi.org/10.1007/s11666-018-0782-3
T. Hussain, Key Eng. Mater., 533, 53 (2013); https://doi.org/10.4028/www.scientific.net/KEM.533.53
S. Kamnis and S. Gu, Chem. Eng. Sci., 61, 5427 (2006); https://doi.org/10.1016/j.ces.2006.04.005
J.A. Hearley and J.A. Little, Surf. Coat. Technol., 33, 671 (2000).
M. Li and P.D. Christofides, Chem. Eng. Sci., 58, 849 (2003); https://doi.org/10.1016/S0009-2509(02)00616-4
G.J. Yang, C.J. Li, F. Han and A. Ohmori, Thin Solid Films, 466, 81 (2004); https://doi.org/10.1016/j.tsf.2004.02.015
M. Bozorgtabar and M. Jafarpour, Am. J. Eng. Res., 4, 82 (2015).
C. -J. Li, G.-J. Yang, Y.-Y. Wang, C.-X. Li, F.-X. Ye and A. Ohmori, Mater. Trans., 47, 1690 (2006); https://doi.org/10.2320/matertrans.47.1690
M. Bozorgtabar, M. Rahimipour and M. Salehi, Mater. Lett., 64, 1173 (2010); https://doi.org/10.1016/j.matlet.2010.02.042
M. Li and P.D. Christofides, J. Therm. Spray Technol., 18, 753 (2009); https://doi.org/10.1007/s11666-009-9309-2
N. Stiegler, D. Bellucci, G. Bolelli, V. Cannillo, R. Gadow, A. Killinger, L. Lusvarghi and A. Sola, J. Therm. Spray Technol., 21, 275 (2012); https://doi.org/10.1007/s11666-011-9724-z
H. Li, K. Khor and P. Cheang, Biomaterials, 23, 85 (2002); https://doi.org/10.1016/S0142-9612(01)00082-5
G. Bolelli, R. Giovanardi, L. Lusvarghi and T. Manfredini, Corros. Sci., 48, 3375 (2006); https://doi.org/10.1016/j.corsci.2006.03.001
Z.G. Ban and L.L. Shaw, J. Spray Technol., 12, 112 (2003); https://doi.org/10.1361/105996303770348564
L. Visai, L. De Nardo, C. Punta, L. Melone, A. Cigada, M. Imbriani and C.R. Arciola, Int. J. Artif. Organs, 34, 929 (2011); https://doi.org/10.5301/ijao.5000050
B. Song, Z. Pala, K. Voisey and T. Hussain, Surf. Coat. Technol., 318, 224 (2017); https://doi.org/10.1016/j.surfcoat.2016.07.046
R.B. Heimann and H.D. Lehmann, Bioceramic Coatings for Medical Implants: Trends and Techniques, Wiley, Chap. 6, pp 253-294 (2015).
G. Bolelli, R. Cannillo, R. Gadow, A. Killinger, L. Lusvarghi and J. Rauch, Surf. Coat. Technol., 203, 1722 (2009);
https://doi.org/10.1016/j.surfcoat.2009.01.006
R. Gadow, A. Killinger and J. Rauch, J. Therm. Spray Technol., 17, 655 (2008); https://doi.org/10.1007/s11666-008-9264-3
U. Brohede, J. Forsgren, S. Roos, A. Mihranyan, H. Engqvist and M. Strømme, J. Mater. Sci. Mater. Med., 20, 1859 (2009); https://doi.org/10.1007/s10856-009-3749-6
B.M. Kang, W.J. Jeong, G.C. Park, D.J. Yoon, H.G. Ahn and Y.S. Lim, J. Nanosci. Nanotechnol., 15, 6020 (2015); https://doi.org/10.1166/jnn.2015.10417
J.M. Lackner, W. Waldhauser, R. Ebner, B. Major and T. Schoberl, Surf. Coat. Technol., 180-181, 585 (2004); https://doi.org/10.1016/j.surfcoat.2003.10.099
S. Murugesan, P. Kuppusami, N. Parvathavarthini and E. Mohandas, Surf. Coat. Technol., 201, 7713 (2007); https://doi.org/10.1016/j.surfcoat.2007.03.004
M. Filipescu, A. Palla-Papavlu and D. Maria, Functional Metal Oxide Thin Films Grown by Pulsed Laser Deposition, Crystalline and Noncrystalline Solids, IntechOpen (2016); https://doi.org/10.5772/62986
E. Bogdanov, Y. Vavllina, N. Shusharina, A. Goykhman and M. Patrushev, J. Nanomed. Nanotechnol., 5, 1 (2014); https://doi.org/10.4172/2157-7439.1000189
M.K. Ji, S.W. Park, K. Lee, I.C. Kang, K.D. Yun, H.S. Kim and H.P. Lim, J. Adv. Prosthodont., 7, 166 (2015); https://doi.org/10.4047/jap.2015.7.2.166
K.S. Novoselov, A.K. Geim, S.V. Morozov, D. Jiang, Y. Zhang, S.V. Dubonos, A.A. Grigorieva IV and A.A. Firsov, Science, 306, 666 (2004); https://doi.org/10.1126/science.1102896
N. Ohtsu, K. Saito, K. Asami and T. Hanawa, Surf. Coat. Technol., 200, 5455 (2006); https://doi.org/10.1016/j.surfcoat.2005.07.003
M. Hamdi and A. Ide-Ektessabi, Surf. Coat. Technol., 163-164, 362 (2003); https://doi.org/10.1016/S0257-8972(02)00625-4
Z.S. Luo, F.Z. Cui, Q.L. Feng, H.D. Li, X.D. Zhu and M. Spector, Hamdi and A. Ide-Ektessabi, Surf. Coat. Technol., 163-164, 362 (2003); https://doi.org/10.1016/S0257-8972(02)00625-4
Z.S. Luo, F.Z. Cui, Q.L. Feng, H.D. Li, X.D. Zhu and M. Spector, Surf. Coat. Technol., 131, 192 (2000); https://doi.org/10.1016/S0257-8972(00)00824-0
S. Boukrouh, R. Bensaha, S. Bourgeois, E. Finot and M.C. Marco de Lucas, Thin Solid Films, 516, 6353 (2008); https://doi.org/10.1016/j.tsf.2007.12.150
S. Davidsdóttir, R. Shabadi, A.C. Galca, I.H. Andersen, K. Dirscherl and R. Ambat, Appl. Surf. Sci., 313, 677 (2014); https://doi.org/10.1016/j.apsusc.2014.06.047
C.J. Tavares, J. Vieira, L. Rebouta, G. Hungerford, P. Coutinho, V. Teixeira, J.O. Carneiro and A.J. Fernandes, Mater. Sci. Eng. B-Solid State Mater. Adv. Technol., 138, 139 (2007); https://doi.org/10.1016/j.mseb.2005.11.043
W. Schönberger, H. Bartzsch, S. Schippel and T. Bachmann, Surf. Coat. Technol., 293, 16 (2016); https://doi.org/10.1016/j.surfcoat.2015.12.073
X. Wang, F. Prokert, H. Reuther, M.F. Maitz and F. Zhang, Surf. Coat. Technol., 185, 12 (2004); https://doi.org/10.1016/j.surfcoat.2003.12.002
W. Schönberger, H. Bartzsch, S. Schippel and T. Bachmann, Surf. Coat. Technol., 293, 16 (2016); https://doi.org/10.1016/j.surfcoat.2015.12.073
A.Y. Goikhman, S.A. Sheludyakov and E.A. Bogdanov, J. Novel Mater.: Coats Nanoeng., 674, 195 (2011); https://doi.org/10.4028/www.scientific.net/MSF.674.195
J. Xu, Y. Li, X. Zhou, Y. Li, Z.D. Gao, Y.Y. Song and P. Schmuki, Chem. Eur. J., 22, 3947 (2016); https://doi.org/10.1002/chem.201505173
S. Reghunath, D. Pinheiro and K.R. Sunaja Devi, App. Surf. Sci. Adv., 3, 100063 (2021); https://doi.org/10.1016/j.apsadv.2021.100063
L. Besra and M. Liu, Progr. Mater. Sci., 52, 1 (2007); https://doi.org/10.1016/j.pmatsci.2006.07.001
I. Gibson and W. Bonfield, J. Mater. Sci. Mater. Med., 13, 685 (2002); https://doi.org/10.1023/A:1015793927364
H. Shalom, Y. Feldman, R. Rosentsveig, I. Pinkas, I. Kaplan-Ashiri, A. Moshkovich, V. Perfilyev, L. Rapoport and R. Tenne, Int. J. Mol. Sci., 19, 657 (2018); https://doi.org/10.3390/ijms19030657
D.H. He, P. Wang, P. Liu, X.K. Liu, F.C. Ma and J. Zhao, Surf. Coat. Technol., 301, 6 (2016); https://doi.org/10.1016/j.surfcoat.2016.07.005
L. Yan, Y. Xiang, J. Yu, Y. Wang and W. Cui, ACS Appl. Mater. Interfaces, 9, 5023 (2017); https://doi.org/10.1021/acsami.6b15979
B. Bakin, T. Koc Delice, U. Tiric, I. Birlik and F. Ak Azem, Surf. Coat. Technol., 301, 29 (2016); https://doi.org/10.1016/j.surfcoat.2015.12.078
R. Chakraborty, V.S. Seesala, S. Sengupta, S. Dhara, P. Saha, K. Das and S. Das, Surf. Interfaces, 10, 1 (2018); https://doi.org/10.1016/j.surfin.2017.11.002
X. Zhao, T. Hu, H. Li, M. Chen, S. Cao, L. Zhang and X. Hou, Appl. Surf. Sci., 257, 3612 (2011); https://doi.org/10.1016/j.apsusc.2010.11.088
A. Tahmasbi Rad, M. Solati-Hashjin, N.A.A. Osman and S. Faghihi, Ceram. Int., 40, 12681 (2014); https://doi.org/10.1016/j.ceramint.2014.04.116
M. Sankar, S. Suwas, S. Balasubramanian and G. Manivasagam, Surf. Coat. Technol., 309, 840 (2017); https://doi.org/10.1016/j.surfcoat.2016.10.077
T. Kokubo, H. Kushitani, S. Sakka, T. Kitsugi and T. Yamamuro, J. Biomed. Mater. Res., 24, 721 (1990); https://doi.org/10.1002/jbm.820240607
A.L. Escada, J.P.B. Machado, S.G. Schneider, M.C.R.A. Rezende and A.P.R.A. Claro, J. Mater. Sci. Mater. Electron., 22, 2457 (2011); https://doi.org/10.1007/s10856-011-4434-0
W. Xia, C. Lindahl, J. Lausmaa, P. Borchardt, A. Ballo, P. Thomsen and H. Engqvist, Acta Biomater., 6, 1591 (2010); https://doi.org/10.1016/j.actbio.2009.10.030
B. Burnat, J. Robak, A. Leniart, I. Piwoñski and D. Batory, Ceram. Int., 43, 13735 (2017); https://doi.org/10.1016/j.ceramint.2017.07.086
B. Burnat, J. Robak, D. Batory, A. Leniart, I. Piwoñski, S. Skrzypek and M. Brycht, Surf. Coat. Technol., 280, 291 (2015); https://doi.org/10.1016/j.surfcoat.2015.09.018
J. Coreño, A. Martínez, O.A. Coreño, A. Bolarín and F. Sánchez, J. Biomed. Mater. Res. A, 64, 131 (2003); https://doi.org/10.1002/jbm.a.10395
M. Uchida, H.M. Kim, T. Kokubo, S. Fujibayashi and T. Nakamura, J. Biomed. Mater. Res. A, 64, 164 (2003); https://doi.org/10.1002/jbm.a.10414
T. Peltola, M. Jokinen, H. Rahiala, J.I. Heikkilä, I. Kangasniemi, M. Pätsi and A. Yli-Urpo, J. Biomed. Mater. Res., 51, 200 (2000); https://doi.org/10.1002/(SICI)1097-4636(200008)51:2<200::AIDJBM8>3.0.CO;2-Z
P. Li, C. Ohtsuki, T. Kokubo, K. Nakanishi, N. Soga and K. deGroot, J. Biomed. Mater. Res., 28, 7 (1994); https://doi.org/10.1002/jbm.820280103