Copyright (c) 2021 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Castor Oil-Based Nanolubricants: An Overview
Corresponding Author(s) : Jyoti Srivastava
Asian Journal of Chemistry,
Vol. 33 No. 12 (2021): Vol 33 Issue 12, 2021
Abstract
Vegetable oils are very effective, economic and appealing option as compared to conventional lubricants due to their environment-friendly nature, sustainable behaviour and biodegradability. Castor oil, one of the promising non-edible vegetable oils with nanoparticle additives has the potential to serve as base lubricating oil. The benefit of using nanoparticles in base oils is their small size, which works as a roller on contacting surfaces and results in reducing the wear and friction more efficiently. The present review paper has been structured as follows. The first part of this technical article is designed to give a brief about vegetable oils as a lubricant with special reference to castor oil. The second part of the review paper describes the effects of nanoparticles especially molybdenum disulfide (MoS2) in different lubricating oils, especially in castor oil. Finally, the applications of nanolubricants and their future prospects are also discussed.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- Y. Gerbig, S.I.U. Ahmed, F.A. Gerbig and H. Haefke, J. Synth. Lubrication, 21, 177 (2004); https://doi.org/10.1002/jsl.3000210302
- S. Boyde, Green Chem., 4, 293 (2002); https://doi.org/10.1039/b202272a
- G. Geethanjali, K.V. Padmaja and R.B.N. Prasad, Ind. Eng. Chem. Res., 55, 9109 (2016); https://doi.org/10.1021/acs.iecr.6b01550
- K.M. Talkit, D.T. Mahajan and V.H. Masand, Arch. Appl. Sci. Res., 7, 22 (2015).
- S.Z. Erhan and S. Asadauskas, Ind. Crops Prod., 11, 277 (2000); https://doi.org/10.1016/S0926-6690(99)00061-8
- T.Y. Woma, S.A. Lawal, A.S. Abdulrahman, M.A. Olutoye and M.M. Ojapah, Tribology Online, 14, 60 (2019); https://doi.org/10.2474/trol.14.60
- S. Syahrullail, S. Kamitani and A. Shakirin, Procedia Eng., 68, 172 (2013); https://doi.org/10.1016/j.proeng.2013.12.164
- L.A. Quinchia, M.A. Delgado, T. Reddyhoff, C. Gallegos and H.A. Spikes, Tribol. Int., 69, 110 (2014); https://doi.org/10.1016/j.triboint.2013.08.016
- A. Nakarmi and A. Joshi, Nepal J. Sci. Technol., 15, 45 (2015); https://doi.org/10.3126/njst.v15i1.12009
- D.S. Chinchkar, S.T. Satpute and N.R. Kumbhar, Int. J. Eng. Res. Technol., 1, 2 (2012).
- X. Wu, G. Zhao, X. Wang and X. Liu, Tribol. Lett., 65, 51 (2017); https://doi.org/10.1007/s11249-017-0833-9
- H.A. Elemsimit and D. Grecov, Proc. Inst. Mech. Eng., Part J J. Eng. Tribol., 230, 257 (2016); https://doi.org/10.1177/1350650115599013
- K.J. Mannekote and S.V. Kailas, Tribology Online, 6, 76 (2011); https://doi.org/10.2474/trol.6.76
- K.S.V.K. Reddy, N. Kabra, U. Kunchum and T. Vijayakumar, Chinese J. Eng., 2014, Article ID 643521 (2014); https://doi.org/10.1155/2014/643521
- A. Arnšek and J. Vi•intin, J. Synth. Lubrication, 16, 281 (2006); https://doi.org/10.1002/jsl.3000160402
- C.D. Rakopoulos, Energy, 17, 787 (1992); https://doi.org/10.1016/0360-5442(92)90122-G
- R. Radu and Z. Mircea, The Use of Sunflower Oil in Diesel Engines, SAE Technical Paper 972979, Event: International Fuels & Lubricants Meeting & Exposition (1997).
- N.L. Gunjal, D.S. Bajaj and A.K. Mishra, International Advanced Research Journal in Science, Engineering and Technology, 2nd International Conference on Advances in Mechanical Engineering Amrutvahini College of Engineering, Sangamner, India, vol. 3, Special Issue 1, March (2016).
- L.A.T. Honary, Bioresour. Technol., 56, 41 (1996); https://doi.org/10.1016/0960-8524(95)00184-0
- A. Imran, H.H. Masjuki, M.A. Kalam, M. Varman, M. Hasmelidin, K.A.H.A. Mahmud, S.A. Shahir and M. Habibullah, Procedia Eng., 68, 178 (2013); https://doi.org/10.1016/j.proeng.2013.12.165
- A. Savan, A. Pflüger, P. Voumard, A. Schröer and M. Simmonds, Lubr. Sci., 12, 185 (2000); https://doi.org/10.1002/ls.3010120206
- S.U.S. Choi and J.A. Eastman, Enhancing Thermal Conductivity of Fluids with Nanoparticles, Paper presented at ASME International Mechanical Engineering Congress & Exposition, San Francisco, CA, November 12-17 (1995).
- S. Baskar, G. Sriram and S. Arumugam, Tribol. Ind., 37, 449 (2015).
- Y. Su, L. Gong and D. Chan, J. Nanomater., 2015, 276753 (2015); https://doi.org/10.1155/2015/276753
- T. Panhwar, S.A. Mahesar, A.A. Kandhro, S.T.H. Sheerazi, A.H. Kori, Z.H. Laghari and J.-R. Memon, Ukr. Food J., 8, 778 (2019); https://doi.org/10.24263/2304-974X-2019-8-4-9
- B. Chidambaranathan, S. Gopinath, R. Aravindraj, A. Devaraj, S.Gokula Krishnan and J.K.S. Jeevaananthan, Mater. Today: Proc., 33, 84 (2020); https://doi.org/10.1016/j.matpr.2020.03.205
- V. Umarji, Castor Seed Production Estimated to Grow by 88% in 2019-20: Agriwatch Business standards February 22 (2020); https://www.business-standard.com/article/economy-policy/castorseed-production.
- O. Gokdogan, T. Eryilmaz and M.K. Yesilyurt, Cienc., Tecnol. Futuro, 6, 95 (2015); https://doi.org/10.29047/01225383.29
- P.V. Joseph, D. Saxena and D.K. Sharma, J. Synth. Lubrication, 24, 181 (2007); https://doi.org/10.1002/jsl.39
- P. Ghosh, M. Hoque and G. Karmakar, Polym. Bull., 75, 501 (2018); https://doi.org/10.1007/s00289-017-2047-6
- M.B. Mensah, J.A.M. Awudza and P. O’Brien, R. Soc. Open Sci., 5, 180824 (2018); https://doi.org/10.1098/rsos.180824
- A.S. Abdulkareem, A. Jimoh, A.S. Afolabi, J.O. Odigure and D. Patience, Production and Characterization of Biofuel from Non-Edible Oils: An Alternative Energy Sources to Petrol Diesel, Energy Conservation (2012); https://doi.org/10.5772/51341
- O.J. Omohu and A.C. Omale, Eur. J. Biophysics, 5, 62 (2017); https://doi.org/10.11648/j.ejb.20170504.11
- M.A. Saied, S.H. Mansour, M. Eweis, M.Z. El-Sabee, A.L.G. Saad and K.N.A. Nour, Eur. J. Lipid Sci. Technol., 110, 926 (2008); https://doi.org/10.1002/ejlt.200800001
- V.R. Patel, G.G. Dumancas, L.C.K. Viswanath, R. Maples and B.J.J. Subong, Lipid Insights, 9, (2016); https://doi.org/10.4137/LPI.S40233
- O. Kazeem, O. Taiwo and A. Kazeem, Int. J. Sci. Eng. Technol., 3, 1503 (2017).
- S. Guo, C. Li, Y. Zhang, Y. Wang, B. Li, M. Yang, X. Zhang and G. Liu, J. Clean. Prod., 140, 1060 (2017); https://doi.org/10.1016/j.jclepro.2016.10.073
- H.J. Pei, W.J. Zheng, G.C. Wang and H.Q. Wang, Adv. Mater. Res., 381, 20 (2012); https://doi.org/10.4028/www.scientific.net/AMR.381.20
- H.J. Pei, Y.J. Shen, C.G. Shen and G.C. Wang, Appl. Mech. Mater., 130-134, 3830 (2011); https://doi.org/10.4028/www.scientific.net/AMM.130-134.3830
- J. Salimon, D.A.M. Noor, A.T. Nazrizawati, M.Y.M. Firdaus and A. Noraishah, Sains Malays., 39, 761 (2010).
- W.M.L.B. Naranpanawe, M.A.R.M. Fernando, J.R.S.S. Kumara and E.M.S.N. Naramapanawa, Performance Analysis of Natural Esters as Transformer Liquid Insulation Coconut, Castor and Sesame Oils, Paper Presented at IEEE 8th International Conference on Industrial and Information Systems, Dec 17-20 (2013); https://doi.org/10.1109/ICIInfS.2013.6731694
- A. Suhane, R.M. Sarviya, A. Rehman and H.K. Khaira, Int. J. Eng. Res. Appl., 4, 104 (2014).
- K.M. Talkit, D.T. Mahajan and V.H. Masand, J. Chem. Pharm. Res., 4, 5139 (2012).
- M.A. Delgado, L.A. Quinchia, H.A. Spikes and C. Gallegos, J. Clean. Prod., 151, 1 (2017); https://doi.org/10.1016/j.jclepro.2017.03.023
- T.K.K.S. Pathmasiri, G.I.P. Perera and R. Gallage, Energy Sources A, (2019); https://doi.org/10.1080/15567036.2019.1643425
- A.K. Singh, Ind. Crops Prod., 33, 287 (2011); https://doi.org/10.1016/j.indcrop.2010.12.014
- H.Y. Shrirame, N.L. Panwar and B.R. Bamniya, Low Carbon Econ., 2, 1 (2011); https://doi.org/10.4236/lce.2011.21001
- Z.L.A. García, J.M. Franco, C. Valencia, M.A. Delgado, C. Gallegos and M.V. Ruiz-Méndez, Eur. J. Lipid Sci. Technol., 115, 1173 (2013); https://doi.org/10.1002/ejlt.201300066
- D.K. Karupannasamy and R. Ruthuraraj, Int. J. Recent Technol. Eng., 8, 1902 (2013).
- Q.F. Zeng and G.N. Dong, Trans. Nonferrous Met. Soc. China, 24, 354 (2014); https://doi.org/10.1016/S1003-6326(14)63068-5
- B. Bongfa, P.A. Atabor, A. Barnabas and M.O. Adeoti, J. Tribologi, 5, 1 (2015).
- S.M. Nasri, S.A. Nama and M.T. Mezher, J. Mechan. Eng. Res. Develop., 42, 30 (2019); https://doi.org/10.26480/jmerd.03.2019.30.34
- R. Padmini, P.V. Krishna and G.K. Mohana Rao, Proc. Inst. Mech. Eng., B, 229, 2196 (2015); https://doi.org/10.1177/0954405414548465
- R. Padmini, P. Vamsi Krishna and G.K. Mohana Rao, Tribol. Int., 94, 490 (2016); https://doi.org/10.1016/j.triboint.2015.10.006
- T. Chaitanya, N. Harsha and V.S.N. Venkata Ramana, Int. J. Innov. Res. Sci., Eng. Technol., 3, 30 (2018).
- Sonali, D., Karandikar, P. M., Int. J. Innov. Res. Sci., Eng. Technol., 7, 6862 (2018).
- W. Dai, B. Kheireddin, H. Gao and H. Liang, Tribol. Int., 102, 88 (2016); https://doi.org/10.1016/j.triboint.2016.05.020
- D. Kim, D. Sun, W. Lu, Z. Cheng, Y. Zhu, D. Le, T.S. Rahman and L. Bartels, Langmuir, 27, 11650 (2011); https://doi.org/10.1021/la201878f
- X. Zhang, B. Luster, A. Church, C. Muratore, A.A. Voevodin, P. Kohli, S. Aouadi and S. Talapatra, Appl. Mater. Interf., 1, 735 (2009); https://doi.org/10.1021/am800240e
- C.L. Stender, E.C. Greyson, Y. Babayan and T.W. Odom, Adv. Mater., 17, 2837 (2005); https://doi.org/10.1002/adma.200500856
- M.M. Mdleleni, T. Hyeon and K.S. Suslick, J. Am. Chem. Soc., 120, 6189 (1998); https://doi.org/10.1021/ja9800333
- F.A. Deorsola, N. Russo, G.A. Blengini and D. Fino, Chem. Eng. J., 195-196, 1 (2012); https://doi.org/10.1016/j.cej.2012.04.080
- S.V.P. Vattikuti and C. Byon, J. Nanomater., 2015, 710462 (2015); https://doi.org/10.1155/2015/710462
- L.O. Shyyko, V.O. Kotsyubynsky and I.M. Budzulyak, J. Nanosci. Nanotechnol., 16, 7792 (2016); https://doi.org/10.1166/jnn.2016.12559
- B. Gao and X. Zhang, S. Afr. J. Chem., 67, 6 (2014).
- Z. Wu, D. Wang and A. Sun, J. Cryst. Growth, 312, 340 (2010); https://doi.org/10.1016/j.jcrysgro.2009.10.024
- J. Chen, S.L. Li and Z.L. Tao, J. Alloys Compd., 356-357, 413 (2003); https://doi.org/10.1016/S0925-8388(03)00114-2
- Y. Tian, J. Zhao, W. Fu, Y. Liu, Y. Zhu and Z. Wang, Mater. Lett., 59, 3452 (2005); https://doi.org/10.1016/j.matlet.2005.06.012
- W.J. Li, E.W. Shi, J.M. Ko, Z. Chen, H. Ogino and T. Fukuda, J. Cryst. Growth, 250, 418 (2003); https://doi.org/10.1016/S0022-0248(02)02412-0
- M. Liu, X. Li, Z. Xu, B. Li, L.L. Chen and N.N. Shan, Chin. Sci. Bull., 57, 3862 (2012); https://doi.org/10.1007/s11434-012-5339-0
- G. Santillo, F.A. Deorsola, S. Bensaid, N. Russo and D. Fino, Chem. Eng. J., 207-208, 322 (2012); https://doi.org/10.1016/j.cej.2012.06.127
- J.A. Eastman, S.U.S. Choi, S. Li, W. Yu and L.J. Thompson, Appl. Phys. Lett., 78, 718 (2001); https://doi.org/10.1063/1.1341218
- P.C. Hiemenz and R. Rajagopalan, Principles of Colloids and Surface Chemistry, CRC Press: New York, Edn. 3 (1997).
- Y. Chen, P. Renner and H. Liang, Lubricants, 7, 7 (2019); https://doi.org/10.3390/lubricants7010007
- R. Akiyama, N. Fujino, K. Kaneda and M. Kinoshita, Condens. Matter Phys., 10, 587 (2007); https://doi.org/10.5488/CMP.10.4.587
- H. Reerink and J.Th.G. Overbeek, Discuss. Faraday Soc., 18, 74 (1954); https://doi.org/10.1039/df9541800074
- R. Choudhary, D. Khurana, A. Kumar and S. Subudhi, J. Exp. Nanosci., 12, 140 (2017); https://doi.org/10.1080/17458080.2017.1285445
- S. Lee, S.U.S. Choi, S. Li and J.A. Eastman, J. Heat Transfer, 121, 280 (1999); https://doi.org/10.1115/1.2825978
- H. Xie, J. Wang, T. Xi, Y. Liu, F. Ai and Q. Wu, J. Appl. Phys., 91, 4568 (2002); https://doi.org/10.1063/1.1454184
- S.U.S. Choi, Z.G. Zhang, W. Yu, F.E. Lockwood and E.A. Grulke, Appl. Phys. Lett., 79, 2252 (2001); https://doi.org/10.1063/1.1408272
- S.M. Muzakkir, K.P. Lijesh and H. Hirani, Int. J. Curr. Eng. Technol., 5, 681 (2015).
- C. Shi, D. Mao and H. Feng, J. Cent. South Univ. Technol., 14, 673 (2007); https://doi.org/10.1007/s11771-007-0129-6
- J. Padgurskas, R. Rukuiza, I. Prosycevas and R. Kreivaitis, Tribol. Int., 60, 224 (2013); https://doi.org/10.1016/j.triboint.2012.10.024
- Y.Y. Wu, W.C. Tsui and T.C. Liu, Wear, 262, 819 (2007); https://doi.org/10.1016/j.wear.2006.08.021
- M.I.H.C. Abdullah, N. Tamaldin, H. Amiruddin and N.R.M. Nuri, Ind. Lubricat. Tribol., 68, 441 (2016); https://doi.org/10.1108/ILT-10-2015-0157
- C.P. Twist, I. Bassanetti, M. Snow, M. Delferro, H. Bazzi, Y.-W. Chung, L. Marchió, T.J. Marks and Q.J. Wang, Tribol. Lett., 52, 261 (2013); https://doi.org/10.1007/s11249-013-0211-1
- K. Kirhorn, L.U. Lanny, G. Oleksandr and M. Oleksandr, Nano Graphite Flakes as Lubricant Additive, Paper presented at Proceedings of the 6th Swedish Production Symposium, The Swedish Production Academy (2014).
- M. Praveena, V. Jayaram and S.K. Biswas, Ind. Eng. Chem. Res., 51, 12321 (2012); https://doi.org/10.1021/ie3011337
- P. Tao, L. Shu, J. Zhang, C. Lee, Q. Ye, H. Guo and T. Deng, Progr. Nat. Sci. Mater. Int., 28, 554 (2018); https://doi.org/10.1016/j.pnsc.2018.09.003
- N.G. Demas, R.A. Erck, C. Lorenzo-Martin, O.O. Ajayi and G.R. Fenske, J. Nanomater., 2017, 8425782 (2017); https://doi.org/10.1155/2017/8425782
- S.M. Alves, V.S. Mello, E.A. Faria and A.P.P. Camargo, Tribol. Int., 100, 263 (2016); https://doi.org/10.1016/j.triboint.2016.01.050
- A. Hernández Battez, R. González, J.L. Viesca, J.E. Fernández, J.M. Díaz-Fernández, A. Machado, R. Chou and J. Riba, Wear, 265, 422 (2008); https://doi.org/10.1016/j.wear.2007.11.013
- R.N. Gupta, A.P. Harsha and S. Singh, Appl. Nanosci., 8, 567 (2018); https://doi.org/10.1007/s13204-018-0670-7
- A. Das, S.K. Patel and S.R. Das, Mech. Ind., 20, 506 (2019); https://doi.org/10.1051/meca/2019036
- L. Kerni, A. Raina and M.I.U. Haq, Wear, 426-427, 819 (2019); https://doi.org/10.1016/j.wear.2019.01.022
- V. Cortes, K. Sanchez, R. Gonzalez, M. Alcoutlabi and J.A. Ortega, Lubricants, 8, 10 (2020); https://doi.org/10.3390/lubricants8010010
- M.F. Trajano, E.F. Moura, K.B. Ribeiro and S.M. Alves, Mater. Res., 17, 1124 (2014); https://doi.org/10.1590/1516-1439.228213
- G. Zhang, Y. Xu, X. Xiang, G. Zheng, X. Zeng, Z. Li, T. Ren and Y. Zhang, Tribol. Int., 126, 39 (2018); https://doi.org/10.1016/j.triboint.2018.05.004
- M.S. Khan, M. S. Sisodia, S. Gupta, M. Feroskhan, S. Kannan and K. Krishnasamy, Eng. Sci. Technol. Int. J., 22, 1187 (2019); https://doi.org/10.1016/j.jestch.2019.04.005
- S.K. Mechiri, V. Vasu and A. Venu Gopal, Exp. Heat Transf., 30, 205 (2017); https://doi.org/10.1080/08916152.2016.1233147
- V. Kumar, A. Dhanola, H.C. Garg and G. Kumar, Mater. Today Proc., 28, 1392 (2020); https://doi.org/10.1016/j.matpr.2020.04.807
- B. Suresha, G. Hemanth, A. Rakesh and K.M. Adarsh, Adv. Tribol., 2020, 1 (2020); https://doi.org/10.1155/2020/1984931
- A.G.N. Sofiah, M. Samykano, S. Shahabuddin, K. Kadirgama and A.K. Pandey, J. Therm. Anal. Calorim., 145, 2967 (2020); https://doi.org/10.1007/s10973-020-09891-6
- X. Tao, Z. Jiazheng and X. Kang, J. Phys. D Appl. Phys., 29, 2932 (1996); https://doi.org/10.1088/0022-3727/29/11/029
- R.B. Rastogi, M. Yadav and A. Bhattacharya, Wear, 252, 686 (2002); https://doi.org/10.1016/S0043-1648(01)00878-X
- G. Liu, X. Li, B. Qin, D. Xing, Y. Guo and R. Fan, Tribol. Lett., 17, 961 (2004); https://doi.org/10.1007/s11249-004-8109-6
- A.A. Noori, H.A. Hussein and N.S.M. Namer, IOP Conf. Ser.: Mater. Sci. Eng., 518, 032040 (2019); https://doi.org/10.1088/1757-899X/518/3/032040
- S. Bhaumik, R. Maggirwar, S. Datta and S.D. Pathak, Appl. Surf. Sci., 449, 277 (2018); https://doi.org/10.1016/j.apsusc.2017.12.131
- R.N. Gupta and A.P. Harsha, Proc. Inst. Mechan. Eng., Part J: J. Eng. Tribol., 232, 1055 (2017); https://doi.org/10.1177/1350650117739159
- V.S. Rao and M.V.S. Babu, Int. Res. J. Eng. Technol., 5, 827 (2018).
- K.N. Thakkar, S.S. Mhatre and R.Y. Parikh, Nanomedicine, 6, 257 (2010); https://doi.org/10.1016/j.nano.2009.07.002
- J.N. Tiwari, R.N. Tiwari and K.S. Kim, Prog. Mater. Sci., 57, 724 (2012); https://doi.org/10.1016/j.pmatsci.2011.08.003
- S.U.S. Choi, Eds.: D.A. Signer and H.P. Wang, Developments and Applications of Non-Newtonian Flows, ASME, New York, vol. 66, pp. 99-105 (1995).
- J.S. Loveday, R.J. Nelmes, M. Guthrie, D.D. Klug and J.S. Tse, Phys. Rev. Lett., 87, 215501 (2001); https://doi.org/10.1103/PhysRevLett.87.215501
- B.M. Berkovsky, V.F. Medvedef and M.S. Krakov, Magnetic Fluids in Engineering Applications, Oxford University Press: Oxford, New York (1993).
- Y. Wang, Z. Wan, Z. Lu, Z. Zhang and Y. Tang, Tribol. Int., 124, 10 (2018); https://doi.org/10.1016/j.triboint.2018.03.035
- R.N. Gupta and A.P. Harsha, Ind. Lubr. Tribol., 70, 700 (2018); https://doi.org/10.1108/ILT-02-2017-0030
- S. Bhaumik, S. Datta and S.D. Pathak, J. Tribol., 139, 061802 (2017); https://doi.org/10.1115/1.4036379
- M. Gulzar, H.H. Masjuki, M. Varman, M.A. Kalam, R.A. Mufti, N.W.M. Zulkifli, R. Yunus and R. Zahid, Tribol. Int., 88, 271 (2015); https://doi.org/10.1016/j.triboint.2015.03.035
- Z.Y. Xu, K.H. Hu, C.L. Han, X.G. Hu and Y.F. Xu, Tribol. Lett., 49, 513 (2013); https://doi.org/10.1007/s11249-012-0092-8
- C.P. Koshy, P.K. Rajendrakumar and M.V. Thottackkad, Wear, 330-331, 288 (2015); https://doi.org/10.1016/j.wear.2014.12.044.
- Z.Y. Xu, K.H. Hu, Y.K. Cai, F. Huang and C.L. Han, Tribology- Mater. Surf. Interf., 8, 179 (2014); https://doi.org/10.1179/1751584X14Y.0000000074
- M. Lovell, C.F. Higgs, P. Deshmukh and A. Mobley, J. Mater. Process. Technol., 177, 87 (2006); https://doi.org/10.1016/j.jmatprotec.2006.04.045
- N. Salih, J. Salimon, E. Yousif and B.M. Abdullah, Chem. Cent. J., 7, 128 (2013); https://doi.org/10.1186/1752-153X-7-128
- B. Shen, P. Kalita, A.P. Malshe and A.J. Shih, Performance of Novel MoS2 Nanoparticles-Based Grinding Fluids in Mini-Mum Quantity Lubrication Grinding, Transactions of NAMRI/SME, vol. 36, pp. 357-364 (2008).
- D. Jia, C. Li, Y. Zhang, M. Yang, Y. Wang, S. Guo and H. Cao, Precis. Eng., 50, 248 (2017); https://doi.org/10.1016/j.precisioneng.2017.05.012
- C.G. Lee, S.W. Cho, Y. Hwang and J.K. Lee, Effects of Nanolubricants on the Friction and Wear Characteristics at Thrust Slide Bearing of Scroll Compressor, International Proceeding of the 22nd International Congress of Refrigeration, Beijing (China) August 21-26 (2007).
- R.X. Wang and H.B. Xie, A Refrigerating System Using HFC134a and Mineral Lubricant Appended with N-TiO2 as Working Fluids, Proceedings of the 4thInternational Symposium on HAVC, Beijing, China: Tsinghua University Press (2003).
- S.S. Bi, S. Shi and L.L. Zhang, Appl. Therm. Eng., 28, 1834 (2008); https://doi.org/10.1016/j.applthermaleng.2007.11.018
- N. Subramani and M.J. Prakash, Int. J. Eng. Sci. Technol., 3, 95 (2011); https://doi.org/10.4314/ijest.v3i9.8
- D.S. Kumar and R. Elansezhian, Int. J. Modern Eng. Res., 2, 3927 (2012).
- N.J. Fox and G.W. Stachowiak, Tribol. Int., 40, 1035 (2007); https://doi.org/10.1016/j.triboint.2006.10.001
References
Y. Gerbig, S.I.U. Ahmed, F.A. Gerbig and H. Haefke, J. Synth. Lubrication, 21, 177 (2004); https://doi.org/10.1002/jsl.3000210302
S. Boyde, Green Chem., 4, 293 (2002); https://doi.org/10.1039/b202272a
G. Geethanjali, K.V. Padmaja and R.B.N. Prasad, Ind. Eng. Chem. Res., 55, 9109 (2016); https://doi.org/10.1021/acs.iecr.6b01550
K.M. Talkit, D.T. Mahajan and V.H. Masand, Arch. Appl. Sci. Res., 7, 22 (2015).
S.Z. Erhan and S. Asadauskas, Ind. Crops Prod., 11, 277 (2000); https://doi.org/10.1016/S0926-6690(99)00061-8
T.Y. Woma, S.A. Lawal, A.S. Abdulrahman, M.A. Olutoye and M.M. Ojapah, Tribology Online, 14, 60 (2019); https://doi.org/10.2474/trol.14.60
S. Syahrullail, S. Kamitani and A. Shakirin, Procedia Eng., 68, 172 (2013); https://doi.org/10.1016/j.proeng.2013.12.164
L.A. Quinchia, M.A. Delgado, T. Reddyhoff, C. Gallegos and H.A. Spikes, Tribol. Int., 69, 110 (2014); https://doi.org/10.1016/j.triboint.2013.08.016
A. Nakarmi and A. Joshi, Nepal J. Sci. Technol., 15, 45 (2015); https://doi.org/10.3126/njst.v15i1.12009
D.S. Chinchkar, S.T. Satpute and N.R. Kumbhar, Int. J. Eng. Res. Technol., 1, 2 (2012).
X. Wu, G. Zhao, X. Wang and X. Liu, Tribol. Lett., 65, 51 (2017); https://doi.org/10.1007/s11249-017-0833-9
H.A. Elemsimit and D. Grecov, Proc. Inst. Mech. Eng., Part J J. Eng. Tribol., 230, 257 (2016); https://doi.org/10.1177/1350650115599013
K.J. Mannekote and S.V. Kailas, Tribology Online, 6, 76 (2011); https://doi.org/10.2474/trol.6.76
K.S.V.K. Reddy, N. Kabra, U. Kunchum and T. Vijayakumar, Chinese J. Eng., 2014, Article ID 643521 (2014); https://doi.org/10.1155/2014/643521
A. Arnšek and J. Vi•intin, J. Synth. Lubrication, 16, 281 (2006); https://doi.org/10.1002/jsl.3000160402
C.D. Rakopoulos, Energy, 17, 787 (1992); https://doi.org/10.1016/0360-5442(92)90122-G
R. Radu and Z. Mircea, The Use of Sunflower Oil in Diesel Engines, SAE Technical Paper 972979, Event: International Fuels & Lubricants Meeting & Exposition (1997).
N.L. Gunjal, D.S. Bajaj and A.K. Mishra, International Advanced Research Journal in Science, Engineering and Technology, 2nd International Conference on Advances in Mechanical Engineering Amrutvahini College of Engineering, Sangamner, India, vol. 3, Special Issue 1, March (2016).
L.A.T. Honary, Bioresour. Technol., 56, 41 (1996); https://doi.org/10.1016/0960-8524(95)00184-0
A. Imran, H.H. Masjuki, M.A. Kalam, M. Varman, M. Hasmelidin, K.A.H.A. Mahmud, S.A. Shahir and M. Habibullah, Procedia Eng., 68, 178 (2013); https://doi.org/10.1016/j.proeng.2013.12.165
A. Savan, A. Pflüger, P. Voumard, A. Schröer and M. Simmonds, Lubr. Sci., 12, 185 (2000); https://doi.org/10.1002/ls.3010120206
S.U.S. Choi and J.A. Eastman, Enhancing Thermal Conductivity of Fluids with Nanoparticles, Paper presented at ASME International Mechanical Engineering Congress & Exposition, San Francisco, CA, November 12-17 (1995).
S. Baskar, G. Sriram and S. Arumugam, Tribol. Ind., 37, 449 (2015).
Y. Su, L. Gong and D. Chan, J. Nanomater., 2015, 276753 (2015); https://doi.org/10.1155/2015/276753
T. Panhwar, S.A. Mahesar, A.A. Kandhro, S.T.H. Sheerazi, A.H. Kori, Z.H. Laghari and J.-R. Memon, Ukr. Food J., 8, 778 (2019); https://doi.org/10.24263/2304-974X-2019-8-4-9
B. Chidambaranathan, S. Gopinath, R. Aravindraj, A. Devaraj, S.Gokula Krishnan and J.K.S. Jeevaananthan, Mater. Today: Proc., 33, 84 (2020); https://doi.org/10.1016/j.matpr.2020.03.205
V. Umarji, Castor Seed Production Estimated to Grow by 88% in 2019-20: Agriwatch Business standards February 22 (2020); https://www.business-standard.com/article/economy-policy/castorseed-production.
O. Gokdogan, T. Eryilmaz and M.K. Yesilyurt, Cienc., Tecnol. Futuro, 6, 95 (2015); https://doi.org/10.29047/01225383.29
P.V. Joseph, D. Saxena and D.K. Sharma, J. Synth. Lubrication, 24, 181 (2007); https://doi.org/10.1002/jsl.39
P. Ghosh, M. Hoque and G. Karmakar, Polym. Bull., 75, 501 (2018); https://doi.org/10.1007/s00289-017-2047-6
M.B. Mensah, J.A.M. Awudza and P. O’Brien, R. Soc. Open Sci., 5, 180824 (2018); https://doi.org/10.1098/rsos.180824
A.S. Abdulkareem, A. Jimoh, A.S. Afolabi, J.O. Odigure and D. Patience, Production and Characterization of Biofuel from Non-Edible Oils: An Alternative Energy Sources to Petrol Diesel, Energy Conservation (2012); https://doi.org/10.5772/51341
O.J. Omohu and A.C. Omale, Eur. J. Biophysics, 5, 62 (2017); https://doi.org/10.11648/j.ejb.20170504.11
M.A. Saied, S.H. Mansour, M. Eweis, M.Z. El-Sabee, A.L.G. Saad and K.N.A. Nour, Eur. J. Lipid Sci. Technol., 110, 926 (2008); https://doi.org/10.1002/ejlt.200800001
V.R. Patel, G.G. Dumancas, L.C.K. Viswanath, R. Maples and B.J.J. Subong, Lipid Insights, 9, (2016); https://doi.org/10.4137/LPI.S40233
O. Kazeem, O. Taiwo and A. Kazeem, Int. J. Sci. Eng. Technol., 3, 1503 (2017).
S. Guo, C. Li, Y. Zhang, Y. Wang, B. Li, M. Yang, X. Zhang and G. Liu, J. Clean. Prod., 140, 1060 (2017); https://doi.org/10.1016/j.jclepro.2016.10.073
H.J. Pei, W.J. Zheng, G.C. Wang and H.Q. Wang, Adv. Mater. Res., 381, 20 (2012); https://doi.org/10.4028/www.scientific.net/AMR.381.20
H.J. Pei, Y.J. Shen, C.G. Shen and G.C. Wang, Appl. Mech. Mater., 130-134, 3830 (2011); https://doi.org/10.4028/www.scientific.net/AMM.130-134.3830
J. Salimon, D.A.M. Noor, A.T. Nazrizawati, M.Y.M. Firdaus and A. Noraishah, Sains Malays., 39, 761 (2010).
W.M.L.B. Naranpanawe, M.A.R.M. Fernando, J.R.S.S. Kumara and E.M.S.N. Naramapanawa, Performance Analysis of Natural Esters as Transformer Liquid Insulation Coconut, Castor and Sesame Oils, Paper Presented at IEEE 8th International Conference on Industrial and Information Systems, Dec 17-20 (2013); https://doi.org/10.1109/ICIInfS.2013.6731694
A. Suhane, R.M. Sarviya, A. Rehman and H.K. Khaira, Int. J. Eng. Res. Appl., 4, 104 (2014).
K.M. Talkit, D.T. Mahajan and V.H. Masand, J. Chem. Pharm. Res., 4, 5139 (2012).
M.A. Delgado, L.A. Quinchia, H.A. Spikes and C. Gallegos, J. Clean. Prod., 151, 1 (2017); https://doi.org/10.1016/j.jclepro.2017.03.023
T.K.K.S. Pathmasiri, G.I.P. Perera and R. Gallage, Energy Sources A, (2019); https://doi.org/10.1080/15567036.2019.1643425
A.K. Singh, Ind. Crops Prod., 33, 287 (2011); https://doi.org/10.1016/j.indcrop.2010.12.014
H.Y. Shrirame, N.L. Panwar and B.R. Bamniya, Low Carbon Econ., 2, 1 (2011); https://doi.org/10.4236/lce.2011.21001
Z.L.A. García, J.M. Franco, C. Valencia, M.A. Delgado, C. Gallegos and M.V. Ruiz-Méndez, Eur. J. Lipid Sci. Technol., 115, 1173 (2013); https://doi.org/10.1002/ejlt.201300066
D.K. Karupannasamy and R. Ruthuraraj, Int. J. Recent Technol. Eng., 8, 1902 (2013).
Q.F. Zeng and G.N. Dong, Trans. Nonferrous Met. Soc. China, 24, 354 (2014); https://doi.org/10.1016/S1003-6326(14)63068-5
B. Bongfa, P.A. Atabor, A. Barnabas and M.O. Adeoti, J. Tribologi, 5, 1 (2015).
S.M. Nasri, S.A. Nama and M.T. Mezher, J. Mechan. Eng. Res. Develop., 42, 30 (2019); https://doi.org/10.26480/jmerd.03.2019.30.34
R. Padmini, P.V. Krishna and G.K. Mohana Rao, Proc. Inst. Mech. Eng., B, 229, 2196 (2015); https://doi.org/10.1177/0954405414548465
R. Padmini, P. Vamsi Krishna and G.K. Mohana Rao, Tribol. Int., 94, 490 (2016); https://doi.org/10.1016/j.triboint.2015.10.006
T. Chaitanya, N. Harsha and V.S.N. Venkata Ramana, Int. J. Innov. Res. Sci., Eng. Technol., 3, 30 (2018).
Sonali, D., Karandikar, P. M., Int. J. Innov. Res. Sci., Eng. Technol., 7, 6862 (2018).
W. Dai, B. Kheireddin, H. Gao and H. Liang, Tribol. Int., 102, 88 (2016); https://doi.org/10.1016/j.triboint.2016.05.020
D. Kim, D. Sun, W. Lu, Z. Cheng, Y. Zhu, D. Le, T.S. Rahman and L. Bartels, Langmuir, 27, 11650 (2011); https://doi.org/10.1021/la201878f
X. Zhang, B. Luster, A. Church, C. Muratore, A.A. Voevodin, P. Kohli, S. Aouadi and S. Talapatra, Appl. Mater. Interf., 1, 735 (2009); https://doi.org/10.1021/am800240e
C.L. Stender, E.C. Greyson, Y. Babayan and T.W. Odom, Adv. Mater., 17, 2837 (2005); https://doi.org/10.1002/adma.200500856
M.M. Mdleleni, T. Hyeon and K.S. Suslick, J. Am. Chem. Soc., 120, 6189 (1998); https://doi.org/10.1021/ja9800333
F.A. Deorsola, N. Russo, G.A. Blengini and D. Fino, Chem. Eng. J., 195-196, 1 (2012); https://doi.org/10.1016/j.cej.2012.04.080
S.V.P. Vattikuti and C. Byon, J. Nanomater., 2015, 710462 (2015); https://doi.org/10.1155/2015/710462
L.O. Shyyko, V.O. Kotsyubynsky and I.M. Budzulyak, J. Nanosci. Nanotechnol., 16, 7792 (2016); https://doi.org/10.1166/jnn.2016.12559
B. Gao and X. Zhang, S. Afr. J. Chem., 67, 6 (2014).
Z. Wu, D. Wang and A. Sun, J. Cryst. Growth, 312, 340 (2010); https://doi.org/10.1016/j.jcrysgro.2009.10.024
J. Chen, S.L. Li and Z.L. Tao, J. Alloys Compd., 356-357, 413 (2003); https://doi.org/10.1016/S0925-8388(03)00114-2
Y. Tian, J. Zhao, W. Fu, Y. Liu, Y. Zhu and Z. Wang, Mater. Lett., 59, 3452 (2005); https://doi.org/10.1016/j.matlet.2005.06.012
W.J. Li, E.W. Shi, J.M. Ko, Z. Chen, H. Ogino and T. Fukuda, J. Cryst. Growth, 250, 418 (2003); https://doi.org/10.1016/S0022-0248(02)02412-0
M. Liu, X. Li, Z. Xu, B. Li, L.L. Chen and N.N. Shan, Chin. Sci. Bull., 57, 3862 (2012); https://doi.org/10.1007/s11434-012-5339-0
G. Santillo, F.A. Deorsola, S. Bensaid, N. Russo and D. Fino, Chem. Eng. J., 207-208, 322 (2012); https://doi.org/10.1016/j.cej.2012.06.127
J.A. Eastman, S.U.S. Choi, S. Li, W. Yu and L.J. Thompson, Appl. Phys. Lett., 78, 718 (2001); https://doi.org/10.1063/1.1341218
P.C. Hiemenz and R. Rajagopalan, Principles of Colloids and Surface Chemistry, CRC Press: New York, Edn. 3 (1997).
Y. Chen, P. Renner and H. Liang, Lubricants, 7, 7 (2019); https://doi.org/10.3390/lubricants7010007
R. Akiyama, N. Fujino, K. Kaneda and M. Kinoshita, Condens. Matter Phys., 10, 587 (2007); https://doi.org/10.5488/CMP.10.4.587
H. Reerink and J.Th.G. Overbeek, Discuss. Faraday Soc., 18, 74 (1954); https://doi.org/10.1039/df9541800074
R. Choudhary, D. Khurana, A. Kumar and S. Subudhi, J. Exp. Nanosci., 12, 140 (2017); https://doi.org/10.1080/17458080.2017.1285445
S. Lee, S.U.S. Choi, S. Li and J.A. Eastman, J. Heat Transfer, 121, 280 (1999); https://doi.org/10.1115/1.2825978
H. Xie, J. Wang, T. Xi, Y. Liu, F. Ai and Q. Wu, J. Appl. Phys., 91, 4568 (2002); https://doi.org/10.1063/1.1454184
S.U.S. Choi, Z.G. Zhang, W. Yu, F.E. Lockwood and E.A. Grulke, Appl. Phys. Lett., 79, 2252 (2001); https://doi.org/10.1063/1.1408272
S.M. Muzakkir, K.P. Lijesh and H. Hirani, Int. J. Curr. Eng. Technol., 5, 681 (2015).
C. Shi, D. Mao and H. Feng, J. Cent. South Univ. Technol., 14, 673 (2007); https://doi.org/10.1007/s11771-007-0129-6
J. Padgurskas, R. Rukuiza, I. Prosycevas and R. Kreivaitis, Tribol. Int., 60, 224 (2013); https://doi.org/10.1016/j.triboint.2012.10.024
Y.Y. Wu, W.C. Tsui and T.C. Liu, Wear, 262, 819 (2007); https://doi.org/10.1016/j.wear.2006.08.021
M.I.H.C. Abdullah, N. Tamaldin, H. Amiruddin and N.R.M. Nuri, Ind. Lubricat. Tribol., 68, 441 (2016); https://doi.org/10.1108/ILT-10-2015-0157
C.P. Twist, I. Bassanetti, M. Snow, M. Delferro, H. Bazzi, Y.-W. Chung, L. Marchió, T.J. Marks and Q.J. Wang, Tribol. Lett., 52, 261 (2013); https://doi.org/10.1007/s11249-013-0211-1
K. Kirhorn, L.U. Lanny, G. Oleksandr and M. Oleksandr, Nano Graphite Flakes as Lubricant Additive, Paper presented at Proceedings of the 6th Swedish Production Symposium, The Swedish Production Academy (2014).
M. Praveena, V. Jayaram and S.K. Biswas, Ind. Eng. Chem. Res., 51, 12321 (2012); https://doi.org/10.1021/ie3011337
P. Tao, L. Shu, J. Zhang, C. Lee, Q. Ye, H. Guo and T. Deng, Progr. Nat. Sci. Mater. Int., 28, 554 (2018); https://doi.org/10.1016/j.pnsc.2018.09.003
N.G. Demas, R.A. Erck, C. Lorenzo-Martin, O.O. Ajayi and G.R. Fenske, J. Nanomater., 2017, 8425782 (2017); https://doi.org/10.1155/2017/8425782
S.M. Alves, V.S. Mello, E.A. Faria and A.P.P. Camargo, Tribol. Int., 100, 263 (2016); https://doi.org/10.1016/j.triboint.2016.01.050
A. Hernández Battez, R. González, J.L. Viesca, J.E. Fernández, J.M. Díaz-Fernández, A. Machado, R. Chou and J. Riba, Wear, 265, 422 (2008); https://doi.org/10.1016/j.wear.2007.11.013
R.N. Gupta, A.P. Harsha and S. Singh, Appl. Nanosci., 8, 567 (2018); https://doi.org/10.1007/s13204-018-0670-7
A. Das, S.K. Patel and S.R. Das, Mech. Ind., 20, 506 (2019); https://doi.org/10.1051/meca/2019036
L. Kerni, A. Raina and M.I.U. Haq, Wear, 426-427, 819 (2019); https://doi.org/10.1016/j.wear.2019.01.022
V. Cortes, K. Sanchez, R. Gonzalez, M. Alcoutlabi and J.A. Ortega, Lubricants, 8, 10 (2020); https://doi.org/10.3390/lubricants8010010
M.F. Trajano, E.F. Moura, K.B. Ribeiro and S.M. Alves, Mater. Res., 17, 1124 (2014); https://doi.org/10.1590/1516-1439.228213
G. Zhang, Y. Xu, X. Xiang, G. Zheng, X. Zeng, Z. Li, T. Ren and Y. Zhang, Tribol. Int., 126, 39 (2018); https://doi.org/10.1016/j.triboint.2018.05.004
M.S. Khan, M. S. Sisodia, S. Gupta, M. Feroskhan, S. Kannan and K. Krishnasamy, Eng. Sci. Technol. Int. J., 22, 1187 (2019); https://doi.org/10.1016/j.jestch.2019.04.005
S.K. Mechiri, V. Vasu and A. Venu Gopal, Exp. Heat Transf., 30, 205 (2017); https://doi.org/10.1080/08916152.2016.1233147
V. Kumar, A. Dhanola, H.C. Garg and G. Kumar, Mater. Today Proc., 28, 1392 (2020); https://doi.org/10.1016/j.matpr.2020.04.807
B. Suresha, G. Hemanth, A. Rakesh and K.M. Adarsh, Adv. Tribol., 2020, 1 (2020); https://doi.org/10.1155/2020/1984931
A.G.N. Sofiah, M. Samykano, S. Shahabuddin, K. Kadirgama and A.K. Pandey, J. Therm. Anal. Calorim., 145, 2967 (2020); https://doi.org/10.1007/s10973-020-09891-6
X. Tao, Z. Jiazheng and X. Kang, J. Phys. D Appl. Phys., 29, 2932 (1996); https://doi.org/10.1088/0022-3727/29/11/029
R.B. Rastogi, M. Yadav and A. Bhattacharya, Wear, 252, 686 (2002); https://doi.org/10.1016/S0043-1648(01)00878-X
G. Liu, X. Li, B. Qin, D. Xing, Y. Guo and R. Fan, Tribol. Lett., 17, 961 (2004); https://doi.org/10.1007/s11249-004-8109-6
A.A. Noori, H.A. Hussein and N.S.M. Namer, IOP Conf. Ser.: Mater. Sci. Eng., 518, 032040 (2019); https://doi.org/10.1088/1757-899X/518/3/032040
S. Bhaumik, R. Maggirwar, S. Datta and S.D. Pathak, Appl. Surf. Sci., 449, 277 (2018); https://doi.org/10.1016/j.apsusc.2017.12.131
R.N. Gupta and A.P. Harsha, Proc. Inst. Mechan. Eng., Part J: J. Eng. Tribol., 232, 1055 (2017); https://doi.org/10.1177/1350650117739159
V.S. Rao and M.V.S. Babu, Int. Res. J. Eng. Technol., 5, 827 (2018).
K.N. Thakkar, S.S. Mhatre and R.Y. Parikh, Nanomedicine, 6, 257 (2010); https://doi.org/10.1016/j.nano.2009.07.002
J.N. Tiwari, R.N. Tiwari and K.S. Kim, Prog. Mater. Sci., 57, 724 (2012); https://doi.org/10.1016/j.pmatsci.2011.08.003
S.U.S. Choi, Eds.: D.A. Signer and H.P. Wang, Developments and Applications of Non-Newtonian Flows, ASME, New York, vol. 66, pp. 99-105 (1995).
J.S. Loveday, R.J. Nelmes, M. Guthrie, D.D. Klug and J.S. Tse, Phys. Rev. Lett., 87, 215501 (2001); https://doi.org/10.1103/PhysRevLett.87.215501
B.M. Berkovsky, V.F. Medvedef and M.S. Krakov, Magnetic Fluids in Engineering Applications, Oxford University Press: Oxford, New York (1993).
Y. Wang, Z. Wan, Z. Lu, Z. Zhang and Y. Tang, Tribol. Int., 124, 10 (2018); https://doi.org/10.1016/j.triboint.2018.03.035
R.N. Gupta and A.P. Harsha, Ind. Lubr. Tribol., 70, 700 (2018); https://doi.org/10.1108/ILT-02-2017-0030
S. Bhaumik, S. Datta and S.D. Pathak, J. Tribol., 139, 061802 (2017); https://doi.org/10.1115/1.4036379
M. Gulzar, H.H. Masjuki, M. Varman, M.A. Kalam, R.A. Mufti, N.W.M. Zulkifli, R. Yunus and R. Zahid, Tribol. Int., 88, 271 (2015); https://doi.org/10.1016/j.triboint.2015.03.035
Z.Y. Xu, K.H. Hu, C.L. Han, X.G. Hu and Y.F. Xu, Tribol. Lett., 49, 513 (2013); https://doi.org/10.1007/s11249-012-0092-8
C.P. Koshy, P.K. Rajendrakumar and M.V. Thottackkad, Wear, 330-331, 288 (2015); https://doi.org/10.1016/j.wear.2014.12.044.
Z.Y. Xu, K.H. Hu, Y.K. Cai, F. Huang and C.L. Han, Tribology- Mater. Surf. Interf., 8, 179 (2014); https://doi.org/10.1179/1751584X14Y.0000000074
M. Lovell, C.F. Higgs, P. Deshmukh and A. Mobley, J. Mater. Process. Technol., 177, 87 (2006); https://doi.org/10.1016/j.jmatprotec.2006.04.045
N. Salih, J. Salimon, E. Yousif and B.M. Abdullah, Chem. Cent. J., 7, 128 (2013); https://doi.org/10.1186/1752-153X-7-128
B. Shen, P. Kalita, A.P. Malshe and A.J. Shih, Performance of Novel MoS2 Nanoparticles-Based Grinding Fluids in Mini-Mum Quantity Lubrication Grinding, Transactions of NAMRI/SME, vol. 36, pp. 357-364 (2008).
D. Jia, C. Li, Y. Zhang, M. Yang, Y. Wang, S. Guo and H. Cao, Precis. Eng., 50, 248 (2017); https://doi.org/10.1016/j.precisioneng.2017.05.012
C.G. Lee, S.W. Cho, Y. Hwang and J.K. Lee, Effects of Nanolubricants on the Friction and Wear Characteristics at Thrust Slide Bearing of Scroll Compressor, International Proceeding of the 22nd International Congress of Refrigeration, Beijing (China) August 21-26 (2007).
R.X. Wang and H.B. Xie, A Refrigerating System Using HFC134a and Mineral Lubricant Appended with N-TiO2 as Working Fluids, Proceedings of the 4thInternational Symposium on HAVC, Beijing, China: Tsinghua University Press (2003).
S.S. Bi, S. Shi and L.L. Zhang, Appl. Therm. Eng., 28, 1834 (2008); https://doi.org/10.1016/j.applthermaleng.2007.11.018
N. Subramani and M.J. Prakash, Int. J. Eng. Sci. Technol., 3, 95 (2011); https://doi.org/10.4314/ijest.v3i9.8
D.S. Kumar and R. Elansezhian, Int. J. Modern Eng. Res., 2, 3927 (2012).
N.J. Fox and G.W. Stachowiak, Tribol. Int., 40, 1035 (2007); https://doi.org/10.1016/j.triboint.2006.10.001