1Applied Chemistry Division, Applied Science Department, University of Technology, Baghdad 10001, Iraq
2Department of Chemical & Process Engineering, Universiti of Kebangsaan Malaysia, Bangi, Selangor 43000, Malaysia
3Industrial Application Center, Industrial Research and Development Directorate, Ministry of Science and Technology, Baghdad, Iraq
*Corresponding author: E-mail: dr.ahmed1975@gmail.com
Hasan R. Obayes1
1Applied Chemistry Division, Applied Science Department, University of Technology, Baghdad 10001, Iraq
2Department of Chemical & Process Engineering, Universiti of Kebangsaan Malaysia, Bangi, Selangor 43000, Malaysia
3Industrial Application Center, Industrial Research and Development Directorate, Ministry of Science and Technology, Baghdad, Iraq
*Corresponding author: E-mail: dr.ahmed1975@gmail.com
Ghadah H. Alwan3
1Applied Chemistry Division, Applied Science Department, University of Technology, Baghdad 10001, Iraq
2Department of Chemical & Process Engineering, Universiti of Kebangsaan Malaysia, Bangi, Selangor 43000, Malaysia
3Industrial Application Center, Industrial Research and Development Directorate, Ministry of Science and Technology, Baghdad, Iraq
*Corresponding author: E-mail: dr.ahmed1975@gmail.com
Abdul Amir H. Kadhum2
1Applied Chemistry Division, Applied Science Department, University of Technology, Baghdad 10001, Iraq
2Department of Chemical & Process Engineering, Universiti of Kebangsaan Malaysia, Bangi, Selangor 43000, Malaysia
3Industrial Application Center, Industrial Research and Development Directorate, Ministry of Science and Technology, Baghdad, Iraq
*Corresponding author: E-mail: dr.ahmed1975@gmail.com
Abu Bakar Mohamad2
1Applied Chemistry Division, Applied Science Department, University of Technology, Baghdad 10001, Iraq
2Department of Chemical & Process Engineering, Universiti of Kebangsaan Malaysia, Bangi, Selangor 43000, Malaysia
3Industrial Application Center, Industrial Research and Development Directorate, Ministry of Science and Technology, Baghdad, Iraq
*Corresponding author: E-mail: dr.ahmed1975@gmail.com
A derivative of 4-hydroxycoumarin, namely, methyl 2-[(2-oxo-2H-chromen-4-yl)oxy]acetate was synthesized and characterized by means of it UV-visible, FT-IR, 1H-NMR and 13C-NMR spectral data. Research has included finding the best method of calculation to six kinds of stretching vibration frequencies contained within the molecule {methyl 2-[(2-oxo-2H-chromen-4-yl)oxy]acetate}. Chosen four DFT models are given by combining the exchange and correlation functional and four basis set to get sixteen different method of calculating. It is found that the best method of calculation to frequency of stretching vibration for (C-H) bond is (HCTH/DGTZVP), for frequency of stretching vibration for (C=O, ester) bond is (MPW1PW91/ LanL2DZ), for frequency of stretching vibration for (C=O, lactone) bond is (HCTH/LanL2DZ), for frequency of stretching vibration for (C=C) bond is (B3LYP/DGTZVP). While calculations showed that the method (HCTH/DGTZVP) needs time more than the rest of the calculation methods.
Keywords
4-hydroxycoumarinDFTB3LYBLUMOHMOM.
Full Article
Generated from XML file
A. Al-Amiery1, A., R. Obayes1, H., H. Alwan3, G., Amir H. Kadhum2, A., & Bakar Mohamad2, A. (2013). Synthesis and Theoretical Studies of Methyl 2-[(2-oxo-2H-chromen-4-yl)oxy]acetate. Asian Journal of Chemistry, 25(18), 10357–10359. https://doi.org/10.14233/ajchem.2013.15469