Copyright (c) 2014 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Effects of Surface-Modified Graphite on Tribological Properties and Thermal Conductivity of Fabric Self-Lubricating Liner
Corresponding Author(s) : Xiaowen Qi
Asian Journal of Chemistry,
Vol. 26 No. 17 (2014): Vol 26 Issue 17
Abstract
The surface-modified graphite powder was used as high thermal conductivity filler to fabricate the woven structure fabric self-lubricating liner. Thermal conductivity and tribological properties of the fabric self-lubricating liners filled with graphite were investigated using KY-DRX-RW tester and MMU-5G tribological tester, respectively. Results showed that the thermal conductivity of the liner filled with 10 wt. % graphite was improved by about 15 % under normal temperature comparing with liner without graphite. By affecting the viscosity of the tribofilm, the graphite improved the wear resistance of the fabric liner filled with graphite and showed opposite effect on the antifriction property. In particular, fabric self-lubricating liner filled with 10 wt. % graphite showed relatively high thermal conductivity, significant low wear loss, slightly increased but steady friction coefficient and integrated weave structure.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- L. Cheng and C. Van Der Geld, Heat. Transfer. Eng., 26, 18 (2005); doi:10.1080/01457630590897033.
- B. Weidenfeller, M. Höfer and R.F. Schilling, Composites Part A, 35, 423 (2004); doi:10.1016/j.compositesa.2003.11.005.
- Z.D. Han and A. Fina, Prog. Polym. Sci., 36, 914 (2011); doi:10.1016/j.progpolymsci.2010.11.004.
- J. Hong, D.W. Park and S.E. Shim, Macromol. Res., 20, 465 (2012); doi:10.1007/s13233-012-0066-6.
- M.G. Miller, M.J. Keith, A.J. King, J.B. Edwards, N. Klinkenberg and A.D. Schiraldi, Polym. Compos., 27, 388 (2006); doi:10.1002/pc.20231.
- D.C. Moreira, L.A. Sphaier, J.M.L. Reis and L.C.S. Nunes, Exp. Therm. Fluid Sci., 35, 1458 (2011); doi:10.1016/j.expthermflusci.2011.06.004.
- R.J. Kuriger and M.K. Alam, Exp. Heat. Transfer., 15, 19 (2002); doi:10.1080/089161502753341843.
- D. Kumlutaş, I.H. Tavman and M. Turhan Çoban, Compos. Sci. Technol., 63, 113 (2003); doi:10.1016/S0266-3538(02)00194-X.
- C. T’Joen, Y. Park, Q. Wang, A. Sommers, X. Han and A. Jacobi, Int. J. Refrig., 32, 763 (2009); doi:10.1016/j.ijrefrig.2008.11.008.
- B. Suresha, G. Chandramohan, N.M. Renukappa and Siddaramaiah, J. Appl. Polym. Sci., 103, 2472 (2007); doi:10.1002/app.25413.
- Z. Zhang, C. Breidt, L. Chang, F. Haupert and K. Friedrich, Composites Part A, 35, 1385 (2004); doi:10.1016/j.compositesa.2004.05.005.
- B.S. Tripathy and M.J. Furey, Wear, 162-164, 385 (1993); doi:10.1016/0043-1648(93)90522-N.
- F. Li, F. Yan, L. Yu and W. Liu, Wear, 237, 33 (2000); doi:10.1016/S0043-1648(99)00303-8.
- P. Werner, V. Altstädt, R. Jaskulka, O. Jacobs, J.K. Sandler, M.S. Shaffer and A.H. Windle, Wear, 257, 1006 (2004); doi:10.1016/j.wear.2004.07.010.
- B. Chen, Q. Bi, J. Yang, Y. Xia and J. Hao, Tribol. Int., 41, 1145 (2008); doi:10.1016/j.triboint.2008.02.014.
- S. Azeem and M. Zain-ul-Abdein, Int. J. Eng. Sci., 52, 30 (2012); doi:10.1016/j.ijengsci.2011.12.002.
- A. Yu, P. Ramesh, M.E. Itkis, E. Bekyarova and R.C. Haddon, J. Phys. Chem. Lett., 111, 7565 (2007); doi:10.1021/jp071761s.
- S. Ganguli, A.K. Roy and D.P. Anderson, Carbon, 46, 806 (2008); doi:10.1016/j.carbon.2008.02.008.
- X. Py, R. Olives and S. Mauran, Int. J. Heat Mass Transfer, 44, 2727 (2001); doi:10.1016/S0017-9310(00)00309-4.
- H. Fukushima, L.T. Drzal, B.P. Rook and M.J. Rich, J. Therm. Anal. Calorim., 85, 235 (2006); doi:10.1007/s10973-005-7344-x.
References
L. Cheng and C. Van Der Geld, Heat. Transfer. Eng., 26, 18 (2005); doi:10.1080/01457630590897033.
B. Weidenfeller, M. Höfer and R.F. Schilling, Composites Part A, 35, 423 (2004); doi:10.1016/j.compositesa.2003.11.005.
Z.D. Han and A. Fina, Prog. Polym. Sci., 36, 914 (2011); doi:10.1016/j.progpolymsci.2010.11.004.
J. Hong, D.W. Park and S.E. Shim, Macromol. Res., 20, 465 (2012); doi:10.1007/s13233-012-0066-6.
M.G. Miller, M.J. Keith, A.J. King, J.B. Edwards, N. Klinkenberg and A.D. Schiraldi, Polym. Compos., 27, 388 (2006); doi:10.1002/pc.20231.
D.C. Moreira, L.A. Sphaier, J.M.L. Reis and L.C.S. Nunes, Exp. Therm. Fluid Sci., 35, 1458 (2011); doi:10.1016/j.expthermflusci.2011.06.004.
R.J. Kuriger and M.K. Alam, Exp. Heat. Transfer., 15, 19 (2002); doi:10.1080/089161502753341843.
D. Kumlutaş, I.H. Tavman and M. Turhan Çoban, Compos. Sci. Technol., 63, 113 (2003); doi:10.1016/S0266-3538(02)00194-X.
C. T’Joen, Y. Park, Q. Wang, A. Sommers, X. Han and A. Jacobi, Int. J. Refrig., 32, 763 (2009); doi:10.1016/j.ijrefrig.2008.11.008.
B. Suresha, G. Chandramohan, N.M. Renukappa and Siddaramaiah, J. Appl. Polym. Sci., 103, 2472 (2007); doi:10.1002/app.25413.
Z. Zhang, C. Breidt, L. Chang, F. Haupert and K. Friedrich, Composites Part A, 35, 1385 (2004); doi:10.1016/j.compositesa.2004.05.005.
B.S. Tripathy and M.J. Furey, Wear, 162-164, 385 (1993); doi:10.1016/0043-1648(93)90522-N.
F. Li, F. Yan, L. Yu and W. Liu, Wear, 237, 33 (2000); doi:10.1016/S0043-1648(99)00303-8.
P. Werner, V. Altstädt, R. Jaskulka, O. Jacobs, J.K. Sandler, M.S. Shaffer and A.H. Windle, Wear, 257, 1006 (2004); doi:10.1016/j.wear.2004.07.010.
B. Chen, Q. Bi, J. Yang, Y. Xia and J. Hao, Tribol. Int., 41, 1145 (2008); doi:10.1016/j.triboint.2008.02.014.
S. Azeem and M. Zain-ul-Abdein, Int. J. Eng. Sci., 52, 30 (2012); doi:10.1016/j.ijengsci.2011.12.002.
A. Yu, P. Ramesh, M.E. Itkis, E. Bekyarova and R.C. Haddon, J. Phys. Chem. Lett., 111, 7565 (2007); doi:10.1021/jp071761s.
S. Ganguli, A.K. Roy and D.P. Anderson, Carbon, 46, 806 (2008); doi:10.1016/j.carbon.2008.02.008.
X. Py, R. Olives and S. Mauran, Int. J. Heat Mass Transfer, 44, 2727 (2001); doi:10.1016/S0017-9310(00)00309-4.
H. Fukushima, L.T. Drzal, B.P. Rook and M.J. Rich, J. Therm. Anal. Calorim., 85, 235 (2006); doi:10.1007/s10973-005-7344-x.