Copyright (c) 2014 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Development of Rapid Tooling Material Formula Based on Aluminum Filled Epoxy Resin
Corresponding Author(s) : Guang Yang
Asian Journal of Chemistry,
Vol. 26 No. 17 (2014): Vol 26 Issue 17
Abstract
This paper examined a new pouring process that utilized an aluminum filled epoxy resin rapid tooling material.The pouring parameters were optimized through variances in the amount of curing agent, diluent and filler. The study comprised of four factors and three orthogonal levels. The optimal formula was determined through range analysis, fracture morphology through scanning electron microscopy (SEM) and analysis of the material combination between the internal interfaces. Aluminum filled epoxy resin materials presented optimized mechanical performance for use as mold materials.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- Y.Y. Quan and L.Z. Zhang, Appl. Surf. Sci., 292, 44 (2014); doi:10.1016/j.apsusc.2013.11.060.
- J.L. Song, Y.C. Jin, G.S. Fu, A.J. He and W.J. Fu, J. Appl. Polym. Sci., 124, 1744 (2012); doi:10.1002/app.35180.
- W. Zhang, L.T. Kuhn, P.S. Jørgensen, K. Thydén, J.J. Bentzen, E. Abdellahi, B.R. Sudireddy, M. Chen and J.R. Bowen, Microsc. Microanal., 19, 501 (2013); doi:10.1017/S1431927613000019.
- D. King and T. Tansey, J. Mater. Process. Technol., 121, 313 (2002); doi:10.1016/S0924-0136(01)01145-1.
- J.H. Zhao and J. Zhang, Eng. Plastics Appl., 35, 47 (2007).
- K. Nagahanumaiah, K. Subburaj and B. Ravi, Comput. Ind., 59, 262 (2008); doi:10.1016/j.compind.2007.06.021.
- Y.G. Wang, Rapid Tooling and Its Applications, Huazhong University of Science and Technology Press, Wuhan (2003).
- J.P. Sun. Experimental Research on Materials Components and Process of Metal Resin Mold, Shandong University Press, Shandong (2005).
- R.J. Liu, Y.W. Zhang, C.H. Wen and J. Tang, Test Technol. Manag., 27, 52 (2010).
- L. Liu, Z. X. Xin, Rubber/Plastic Technol. Equipment, 30, 8 (2004).
- V.G.M. Sivel, J. Van Den Brand, W.R. Wang, H. Mohdadi, F.D. Tichelaar, P.F.A. Alkemade and H.W. Zandbergen, J. Master Process Technol., 214, 237 (2004).
- G. Yang, Y.G. Zhou, Y.D. Zhang and Y.F. Yue, Mater. Sci. Eng., 35, 60 (2012).
- L.J. Pan and J.Q. Chen, Experiment Design and Data Processing, Southeast University Press, Nanjing (2008).
- R.L. Zhang, Y.S. Liu and Y.X. Jin, Mater. Des., 12, 71 (2011).
- J. Zhang, Urban Construction and Commercial Outlets, 42, 287 (2009).
- J. Zhang, Study on Rapid Prototyping Material Based on Epoxy Resin, Chongqing University, Chongqing, China, p. 19 (2007).
References
Y.Y. Quan and L.Z. Zhang, Appl. Surf. Sci., 292, 44 (2014); doi:10.1016/j.apsusc.2013.11.060.
J.L. Song, Y.C. Jin, G.S. Fu, A.J. He and W.J. Fu, J. Appl. Polym. Sci., 124, 1744 (2012); doi:10.1002/app.35180.
W. Zhang, L.T. Kuhn, P.S. Jørgensen, K. Thydén, J.J. Bentzen, E. Abdellahi, B.R. Sudireddy, M. Chen and J.R. Bowen, Microsc. Microanal., 19, 501 (2013); doi:10.1017/S1431927613000019.
D. King and T. Tansey, J. Mater. Process. Technol., 121, 313 (2002); doi:10.1016/S0924-0136(01)01145-1.
J.H. Zhao and J. Zhang, Eng. Plastics Appl., 35, 47 (2007).
K. Nagahanumaiah, K. Subburaj and B. Ravi, Comput. Ind., 59, 262 (2008); doi:10.1016/j.compind.2007.06.021.
Y.G. Wang, Rapid Tooling and Its Applications, Huazhong University of Science and Technology Press, Wuhan (2003).
J.P. Sun. Experimental Research on Materials Components and Process of Metal Resin Mold, Shandong University Press, Shandong (2005).
R.J. Liu, Y.W. Zhang, C.H. Wen and J. Tang, Test Technol. Manag., 27, 52 (2010).
L. Liu, Z. X. Xin, Rubber/Plastic Technol. Equipment, 30, 8 (2004).
V.G.M. Sivel, J. Van Den Brand, W.R. Wang, H. Mohdadi, F.D. Tichelaar, P.F.A. Alkemade and H.W. Zandbergen, J. Master Process Technol., 214, 237 (2004).
G. Yang, Y.G. Zhou, Y.D. Zhang and Y.F. Yue, Mater. Sci. Eng., 35, 60 (2012).
L.J. Pan and J.Q. Chen, Experiment Design and Data Processing, Southeast University Press, Nanjing (2008).
R.L. Zhang, Y.S. Liu and Y.X. Jin, Mater. Des., 12, 71 (2011).
J. Zhang, Urban Construction and Commercial Outlets, 42, 287 (2009).
J. Zhang, Study on Rapid Prototyping Material Based on Epoxy Resin, Chongqing University, Chongqing, China, p. 19 (2007).