Copyright (c) 2018 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Synthesis and Characterization of Polyacid Doped Conducting and Non-Conducting Polymers: A Comparative Study
Corresponding Author(s) : Jeyabalan Thavasikani
Asian Journal of Chemistry,
Vol. 30 No. 4 (2018): Vol 30 Issue 4
Abstract
Keggin type polyacid doped conducting (polyaniline) and non-conducting polymer (starch) with various molar ratios were synthesized by wet chemical method. The prepared compound is characterized by spectral techniques like FT-IR, SEM and XRD. The conductivity studies were also performed for the polyacid doped conducting and non-conducting polymer.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- S.-S. Wang and G.-Y. Yang, Chem. Rev., 115, 4893 (2015); https://doi.org/10.1021/cr500390v.
- J. Kafawein, H.K. Juwhari and M.A. AlDamen, J. Clust. Sci., 26, 1683 (2015); https://doi.org/10.1007/s10876-015-0867-9.
- S. Upreti and A. Ramanan, Cryst. Growth Des., 6, 2066 (2006); https://doi.org/10.1021/cg0601610.
- M.T. Pope and A. Muller, Angew. Chem. Int. Ed. Engl., 30, 34 (1991); https://doi.org/10.1002/anie.199100341.
- T. Ito, H. Yashiro and T. Yamase, Langmuir, 22, 2806 (2006); https://doi.org/10.1021/la052972w.
- W. Salomon, Y. Lan, E. Rivière, S. Yang, C. Roch-Marchal, A. Dolbecq, C. Simonnet-Jégat, N. Steunou, N. Leclerc-Laronze, L. Ruhlmann, T. Mallah, W. Wernsdorfer and P. Mialane, Chem. Eur. J., 22, 6409 (2016); https://doi.org/10.1002/chem.201601356.
- M. Rohani, F.F. Bamoharram, M. Khosravi, J. Baharara and M.M. Heravi, J. Exp. Nanosci., 12, 1 (2017); https://doi.org/10.1080/17458080.2016.1246754.
- M.S. Malik, A.A. Qaiser and M.A. Arif, RSC Advances, 6, 115046 (2016); https://doi.org/10.1039/C6RA24594C.
- R. Chandra and R. Rustgi, Biodegrad. Polymers Prog. Polym. Sci., 23, 1273 (1998); https://doi.org/10.1016/S0079-6700(97)00039-7.
- D.A. Seanor, Electrical Properties of Polymers, Academic Press, p. 15 (2013).
- C.O. Baker, X. Huang, W. Nelson and R.B. Kaner, Chem. Soc. Rev., 46, 1510 (2017); https://doi.org/10.1039/C6CS00555A.
- A. Morrin, F. Wilbeer, O. Ngamna, S.E. Moulton, A.J. Killard, G.G. Wallace and M.R. Smyth, Electrochem. Commun., 7, 317 (2005); https://doi.org/10.1016/j.elecom.2005.01.014.
- J. Jang, J. Bae and K. Lee, Polymer, 46, 3677 (2005); https://doi.org/10.1016/j.polymer.2005.03.030.
- N. Plesu, G. Ilia, A. Pascariu and G. Vlase, Synth. Met., 156, 230 (2006); https://doi.org/10.1016/j.synthmet.2005.11.006.
- G. Bidan, M. Lapkowski and J.P. Travers, Synth. Met., 28, 113 (1989); https://doi.org/10.1016/0379-6779(89)90507-9.
- G.G. Papagianni, D.V. Stergiou, G.S. Armatas, M.G. Kanatzidis and M.I. Prodromidis, Sens. Actuators B, 173, 346 (2012); https://doi.org/10.1016/j.snb.2012.07.020.
- S. Herrmann, C. Ritchie and C. Streb, Dalton Trans., 44, 7092 (2015); https://doi.org/10.1039/C4DT03763D.
- X. Xia, D. Fan, B. An, Y. Cai and Q. Wei, J. Mol. Liq., 206, 335 (2015); https://doi.org/10.1016/j.molliq.2015.03.011.
- A. G. Macdiarmid, R.J. Mammone, J.R. Krawczyk and S.J. Porter, Mol. Cryst. Liq. Cryst., 105, 89 (1984); https://doi.org/10.1080/00268948408071645.
References
S.-S. Wang and G.-Y. Yang, Chem. Rev., 115, 4893 (2015); https://doi.org/10.1021/cr500390v.
J. Kafawein, H.K. Juwhari and M.A. AlDamen, J. Clust. Sci., 26, 1683 (2015); https://doi.org/10.1007/s10876-015-0867-9.
S. Upreti and A. Ramanan, Cryst. Growth Des., 6, 2066 (2006); https://doi.org/10.1021/cg0601610.
M.T. Pope and A. Muller, Angew. Chem. Int. Ed. Engl., 30, 34 (1991); https://doi.org/10.1002/anie.199100341.
T. Ito, H. Yashiro and T. Yamase, Langmuir, 22, 2806 (2006); https://doi.org/10.1021/la052972w.
W. Salomon, Y. Lan, E. Rivière, S. Yang, C. Roch-Marchal, A. Dolbecq, C. Simonnet-Jégat, N. Steunou, N. Leclerc-Laronze, L. Ruhlmann, T. Mallah, W. Wernsdorfer and P. Mialane, Chem. Eur. J., 22, 6409 (2016); https://doi.org/10.1002/chem.201601356.
M. Rohani, F.F. Bamoharram, M. Khosravi, J. Baharara and M.M. Heravi, J. Exp. Nanosci., 12, 1 (2017); https://doi.org/10.1080/17458080.2016.1246754.
M.S. Malik, A.A. Qaiser and M.A. Arif, RSC Advances, 6, 115046 (2016); https://doi.org/10.1039/C6RA24594C.
R. Chandra and R. Rustgi, Biodegrad. Polymers Prog. Polym. Sci., 23, 1273 (1998); https://doi.org/10.1016/S0079-6700(97)00039-7.
D.A. Seanor, Electrical Properties of Polymers, Academic Press, p. 15 (2013).
C.O. Baker, X. Huang, W. Nelson and R.B. Kaner, Chem. Soc. Rev., 46, 1510 (2017); https://doi.org/10.1039/C6CS00555A.
A. Morrin, F. Wilbeer, O. Ngamna, S.E. Moulton, A.J. Killard, G.G. Wallace and M.R. Smyth, Electrochem. Commun., 7, 317 (2005); https://doi.org/10.1016/j.elecom.2005.01.014.
J. Jang, J. Bae and K. Lee, Polymer, 46, 3677 (2005); https://doi.org/10.1016/j.polymer.2005.03.030.
N. Plesu, G. Ilia, A. Pascariu and G. Vlase, Synth. Met., 156, 230 (2006); https://doi.org/10.1016/j.synthmet.2005.11.006.
G. Bidan, M. Lapkowski and J.P. Travers, Synth. Met., 28, 113 (1989); https://doi.org/10.1016/0379-6779(89)90507-9.
G.G. Papagianni, D.V. Stergiou, G.S. Armatas, M.G. Kanatzidis and M.I. Prodromidis, Sens. Actuators B, 173, 346 (2012); https://doi.org/10.1016/j.snb.2012.07.020.
S. Herrmann, C. Ritchie and C. Streb, Dalton Trans., 44, 7092 (2015); https://doi.org/10.1039/C4DT03763D.
X. Xia, D. Fan, B. An, Y. Cai and Q. Wei, J. Mol. Liq., 206, 335 (2015); https://doi.org/10.1016/j.molliq.2015.03.011.
A. G. Macdiarmid, R.J. Mammone, J.R. Krawczyk and S.J. Porter, Mol. Cryst. Liq. Cryst., 105, 89 (1984); https://doi.org/10.1080/00268948408071645.