Issue

Vol. 30 No. 4 (2018): Vol 30 Issue 4

Copyright (c) 2018 AJC

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

An Overview on Smart pH Responsive Polymers

https://doi.org/10.14233/ajchem.2018.21160
Anamica
Department of Applied Sciences, Madan Mohan Malaviya University of Technology, Gorakhpur-273 010, India
P.P. Pande
Department of Applied Sciences, Madan Mohan Malaviya University of Technology, Gorakhpur-273 010, India

Corresponding Author(s) : Anamica

anamicamishra72@gmail.com

Asian Journal of Chemistry, Vol. 30 No. 4 (2018): Vol 30 Issue 4

Abstract

Now a day, a variety of synthetic polymers are synthesized by researchers in some useful manner to several variations in pH, temperature, electric, magnetic fields or other parameters. These polymers are named as stimuli-responsive, environmental-sensitive or smart polymers. These smart polymers are polyelectrolytes in nature and contain acidic/basic groups. They accept or sometimes release proton, in retort to pH change of the environment. The smart pH responsive polymers are manufactured by controlled radical polymerization methods. The smart pH responsive polymeric systems exhibit intelligent behaviour and therefore find numerous uses such as in personal care, delivery of drugs, oil exploration, coating of different objects in industry and water remediation etc. These smart polymers show an intense variation in physical and chemical properties with change in environmental conditions. These behaviours are used for developing several smart drug delivery systems. They deliver the drugs like, tumor drugs, anticancer drugs and antiviral drugs or anti-inflammatory drugs to minimize their toxic effect. Currently, the smart pH responsive polymers are being developed for various biomedical applications and especially for pH targeting nanomedicine.

Keywords

Smart polymers Environmental sensitive polymers Drug Delivery pH-responsive polymers
Anamica, ., & Pande, P. (2018). An Overview on Smart pH Responsive Polymers. Asian Journal of Chemistry, 30(4), 711–718. https://doi.org/10.14233/ajchem.2018.21160
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. M.R. Aguilar, C. Elvira, A. Gallardo, B. Vazquez and J. San Roman, Topics in Tissue Engineering, e-book, Expert issues, Chapter 6, p. 27 (2007).
  2. S. Aoshima and S. Kanaoka, Adv. Polym. Sci., 210, 169 (2007); https://doi.org/10.1007/12_2007_120.
  3. B. Guillerm, S. Monge, V. Lapinte and J.J. Robin, Macromol. Rapid Commun., 33, 1600 (2012); https://doi.org/10.1002/marc.201200266.
  4. J. Turanek, X.F. Wang, P. Knotigova, A. Koudelka, L.F. Dong, E. Vrublova, E. Mahdavian, L. Prochazka, S. Sangsura, A. Vacek, B.A. Salvatore and J. Neuzil, Toxicol. Appl. Pharmacol., 237, 249 (2009); https://doi.org/10.1016/j.taap.2009.01.027.
  5. S.I. Kang, K. Na and Y.H. Bae, Macromol. Symp., 172, 149 (2001); https://doi.org/10.1002/1521-3900(200107)172:1<149::AIDMASY149>3.0.CO;2-G.
  6. Y. Qiu and K. Park, Adv. Drug Deliv. Rev., 53, 321 (2001); https://doi.org/10.1016/S0169-409X(01)00203-4.
  7. S. Dai, P. Ravi and K.C. Tam, Soft Matter, 4, 435 (2008); https://doi.org/10.1039/b714741d.
  8. E.S. Gil and S.M. Hudson, Prog. Polym. Sci., 29, 1173 (2004); https://doi.org/10.1016/j.progpolymsci.2004.08.003.
  9. K. Na, K.H. Lee and Y.H. Bae, J. Control. Release, 97, 513 (2004); https://doi.org/10.1016/S0168-3659(04)00184-1.
  10. S.A. Sukhishvili, Curr. Opin. Colloid Interface Sci., 10, 37 (2005); https://doi.org/10.1016/j.cocis.2005.05.001.
  11. M. Falamarzian and J. Varshosaz, Drug Dev. Ind. Pharm., 24, 667 (1998); https://doi.org/10.3109/03639049809082369.
  12. J.H. Kou, G.L. Amidon and P.I. Lee, Pharm. Res., 5, 592 (1988); https://doi.org/10.1023/A:1015998131160.
  13. L. Brannon-Peppas and N.A. Peppas, Biomaterials, 11, 635 (1990); https://doi.org/10.1016/0142-9612(90)90021-H.
  14. A.R. Khare and N.A. Peppas, J. Biomater. Sci. Polym. Ed., 4, 275 (1993); https://doi.org/10.1163/156856293X00564.
  15. Y. Zhao, H. Yokoi, M. Tanaka, T. Kinoshita and T. Tan, Biomacromolecules, 9, 1511 (2008); https://doi.org/10.1021/bm701143g.
  16. M. Palasis, Implantable or Insertable Therapeutic Agent Delivery Device, US Patent 6506408B1 (2003).
  17. A.K. Dash and G.C. Cudworth II, J. Pharmacol. Toxicol. Methods, 40, 1 (1998); https://doi.org/10.1016/S1056-8719(98)00027-6.
  18. L. Serra, J. Domenech and N.A. Peppas, Biomaterials, 27, 5440 (2006); https://doi.org/10.1016/j.biomaterials.2006.06.011.
  19. T. Yoshida, T.C. Lai, G.S. Kwon and K. Sako, Expert Opin. Drug Deliv., 10, 1497 (2013). https://doi.org/10.1517/17425247.2013.821978.
  20. T.A. Sonia and C.P. Sharma, Drug Discov. Today, 17, 784 (2012); https://doi.org/10.1016/j.drudis.2012.03.019.
  21. R. Gong, C. Li, S. Zhu, Y. Zhang, Y. Du and J. Jiang, Carbohydr. Polym., 85, 869 (2011); https://doi.org/10.1016/j.carbpol.2011.04.011.
  22. W.R. Gombotz and S.F. Wee, Adv. Drug Deliv. Rev., 31, 267 (1998); https://doi.org/10.1016/S0169-409X(97)00124-5.
  23. A. Joshi, S. Solanki, R. Chaudhari, D. Bahadur, M. Aslam and R. Srivastava, Acta Biomater., 7, 3955 (2011); https://doi.org/10.1016/j.actbio.2011.06.053.
  24. I.M. El-Sherbiny, Carbohydr. Polym., 80, 1125 (2010); https://doi.org/10.1016/j.carbpol.2010.01.034.
  25. C.M. Silva, A.J. Ribeiro, I.V. Figueiredo, A.R. Goncalves and F. Veiga, Int. J. Pharm., 311, 1 (2006); https://doi.org/10.1016/j.ijpharm.2005.10.050.
  26. S. Senel, M.J. Kremer, S. Kas, P.W. Wertz, A.A. Hincal and C.A. Squier, Biomaterials, 21, 2067 (2000); https://doi.org/10.1016/S0142-9612(00)00134-4.
  27. H. Kirsebom, M.R. Aguilar, J. San Roman, M. Fernandez, M.A. Prieto and B. Bondar, J. Bioact. Compat. Polym., 22, 621 (2007); https://doi.org/10.1177/0883911507084293.
  28. F.C. Meldrum, Int. Mater. Rev., 48, 187 (2003); https://doi.org/10.1179/095066003225005836.
  29. M. George and T.E. Abraham, J. Control. Release, 114, 1 (2006); https://doi.org/10.1016/j.jconrel.2006.04.017.
  30. S.G. Hu, C.H. Jou and M.C. Yang, Biomaterials, 24, 2685 (2003); https://doi.org/10.1016/S0142-9612(03)00079-6.
  31. I.-Y. Kim, S.-J. Seo, H.-S. Moon, M.-K. Yoo, I.-Y. Park, B.-C. Kim and C.-S. Cho, Biotechnol. Adv., 26, 1 (2008); https://doi.org/10.1016/j.biotechadv.2007.07.009.
  32. C. Alemdaroglu, Z. Degim, N. Çelebi, F. Zor, S. Öztürk and D. Erdogan, Burns, 32, 319 (2006); https://doi.org/10.1016/j.burns.2005.10.015.
  33. S. Ekici, P. Ilgin, S. Butun and N. Sahiner, Carbohydr. Polym., 84, 1306 (2011); https://doi.org/10.1016/j.carbpol.2011.01.028.
  34. R.A. Perez, J.-E. Won, J.C. Knowles and H.-W. Kim, Adv. Drug Deliv. Rev., 65, 471 (2013); https://doi.org/10.1016/j.addr.2012.03.009.
  35. D. Puppi, F. Chiellini, A.M. Piras and E. Chiellini, Prog. Polym. Sci., 35, 403 (2010); https://doi.org/10.1016/j.progpolymsci.2010.01.006.
  36. J. Zhang, B. Senger, D. Vautier, C. Picart, P. Schaaf, J.-C. Voegel and P. Lavalle, Biomaterials, 26, 3353 (2005); https://doi.org/10.1016/j.biomaterials.2004.08.019.
  37. C. Ji, A. Khademhosseini and F. Dehghani, Biomaterials, 32, 9719 (2011); https://doi.org/10.1016/j.biomaterials.2011.09.003.
  38. N. Suchao-in, S. Chirachanchai and S. Perrier, Polymer, 50, 4151 (2009); https://doi.org/10.1016/j.polymer.2009.06.047.
  39. B. Mu, P. Liu, Z. Tang, P. Du and Y. Dong, Nanomedicine, 7, 789 (2011); https://doi.org/10.1016/j.nano.2011.02.009.
  40. C.-Y. Chuang, T.-M. Don and W.-Y. Chiu, J. Polym. Sci. A Polym. Chem., 47, 5126 (2009); https://doi.org/10.1002/pola.23564.
  41. Q. Gao, C. Wang, H. Liu, C. Wang, X. Liu and Z. Tong, Polymer, 50, 2587 (2009); https://doi.org/10.1016/j.polymer.2009.03.049.
  42. J.P. Rao and K.E. Geckeler, Prog. Polym. Sci., 36, 887 (2011); https://doi.org/10.1016/j.progpolymsci.2011.01.001.
  43. D. Braun, Int. J. Polym. Sci., Article ID 893234 (2009); https://doi.org/10.1155/2009/893234.
  44. S.Y. Kim, S.M. Cho, Y.M. Lee and S.J. Kim, J. Appl. Polym. Sci., 78, 1381 (2000); https://doi.org/10.1002/1097-4628(20001114)78:7<1381::AIDAPP90>3.0.CO;2-M.
  45. B. Liu, Algy Kazlauciunas, J.T. Guthrie and S. Perrier, Macromolecules, 38, 2131 (2005); https://doi.org/10.1021/ma048035x.
  46. V. Koul, R. Mohamed, D. Kuckling, H.-J.P. Adler and V. Choudhary, Colloids Surf. B Biointerfaces, 83, 204 (2011); https://doi.org/10.1016/j.colsurfb.2010.11.007.
  47. M. Winkelmann and H.P. Schuchmann, Particuology, 9, 502 (2011); https://doi.org/10.1016/j.partic.2011.02.006.
  48. S. Baruch-Sharon and S. Margel, Colloid Polym. Sci., 288, 869 (2010); https://doi.org/10.1007/s00396-010-2209-7.
  49. F.J. Schork, Y. Luo, W. Smulders, J. Russum, A. Butte and K. Fontenot, Polym. Particles, 175, 129 (2005); https://doi.org/10.1007/b100115.
  50. B.H. Tan and K.C. Tam, Adv. Colloid Interface Sci., 136, 25 (2008); https://doi.org/10.1016/j.cis.2007.07.002.
  51. V. Butun, S. Sonmez, S. Yarligan, F.F. Taktak, A. Atay and S. Butun, Polymer, 49, 4057 (2008); https://doi.org/10.1016/j.polymer.2008.07.026.
  52. E.N. Yamasaki and C.S. Patrickios, Eur. Polym. J., 39, 609 (2003); https://doi.org/10.1016/S0014-3057(02)00244-6.
  53. Y. Miura, N. Nakamura, I. Taniguchi and A. Ichikawa, Polymer, 44, 3461 (2003). https://doi.org/10.1016/S0032-3861(03)00275-1.
  54. S.Y. Park and Y.H. Bae, Macromol. Rapid Commun., 20, 269 (1999); https://doi.org/10.1002/(SICI)1521-3927(19990501)20:5<269::AIDMARC269>3.0.CO;2-3.
  55. B. Grassl, G. Clisson, A. Khoukh and L. Billon, Eur. Polym. J., 44, 50 (2008); https://doi.org/10.1016/j.eurpolymj.2007.10.019.
  56. M.F. Zambaux, F. Bonneaux and R. Gref, J. Control. Release, 50, 31 (1998); https://doi.org/10.1016/S0168-3659(97)00106-5.
  57. K. Matyjaszewski, ACS Symp. Ser.., 1023, 3 (2009); https://doi.org/10.1021/bk-2009-1023.ch001.
  58. W.A. Braunecker and K. Matyjaszewski, Prog. Polym. Sci., 32, 93 (2007); https://doi.org/10.1016/j.progpolymsci.2006.11.002.
  59. L. Mespouille, O. Coulembier, D. Paneva, P. Degee, I. Rashkov and P. Dubois, J. Polym. Sci. A Polym. Chem., 46, 4997 (2008); https://doi.org/10.1002/pola.22827.
  60. P. Satturwar, M.N. Eddine, F. Ravenelle and J.-C. Leroux, Eur. J. Pharm. Biopharm., 65, 379 (2007); https://doi.org/10.1016/j.ejpb.2006.09.012.
  61. Y. Tian, L. Bromberg, S.N. Lin, T. Alan Hatton and K.C. Tam, J. Control. Release, 121, 137 (2007); https://doi.org/10.1016/j.jconrel.2007.05.010.
  62. A. Gregory and M.H. Stenzel, Prog. Polym. Sci., 37, 38 (2012); https://doi.org/10.1016/j.progpolymsci.2011.08.004.
  63. A.E. Smith, X. Xu and C.L. Mccormick, Prog. Polym. Sci., 35, 45 (2010); https://doi.org/10.1016/j.progpolymsci.2009.11.005.
  64. A.B. Lowe and C.L. Mccormick, Prog. Polym. Sci., 32, 283 (2007); https://doi.org/10.1016/j.progpolymsci.2006.11.003.
  65. J. Chiefari, Y.K. Chong, F. Ercole, J. Krstina, J. Jeffery, T.P.T. Le, R.T.A. Mayadunne, G.F. Meijs, C.L. Moad, G. Moad, E. Rizzardo and S.H. Thang, Macromolecules, 31, 5559 (1998); https://doi.org/10.1021/ma9804951.
  66. G. Moad, Y.K. Chong, A. Postma, E. Rizzardo and S.H. Thang, Polymer, 46, 8458 (2005); https://doi.org/10.1016/j.polymer.2004.12.061.
  67. G. Moad, J. Chiefari, Y.K. Chong, J. Krstina, R.T.A. Mayadunne, A. Postma, E. Rizzardo and S.H. Thang, Polym. Int., 49, 993 (2000); https://doi.org/10.1002/1097-0126(200009)49:9<993::AIDPI506>3.0.CO;2-6.
  68. H. Mori and A.H.E. Muller, Prog. Polym. Sci., 28, 1403 (2003); https://doi.org/10.1016/S0079-6700(03)00076-5.
  69. Q. Zhao and P. Ni, Polymer, 46, 3141 (2005); https://doi.org/10.1016/j.polymer.2005.01.089.
  70. C. Zhu, S. Jung, S. Luo, F. Meng, X. Zhu, T.G. Park and Z. Zhong, Biomaterials, 31, 2408 (2010); https://doi.org/10.1016/j.biomaterials.2009.11.077.
  71. H. Tian, Z. Tang, X. Zhuang, X. Chen and X. Jing, Prog. Polym. Sci., 37, 237 (2012); https://doi.org/10.1016/j.progpolymsci.2011.06.004.
  72. J. Yao, Y. Ruan, T. Zhai, J. Guan, G. Tang, H. Li and S. Dai, Polymer, 52, 3396 (2011); https://doi.org/10.1016/j.polymer.2011.05.039.
  73. W. Yuan, J. Zhang, J. Wei, C. Zhang and J. Ren, Eur. Polym. J., 47, 949 (2011); https://doi.org/10.1016/j.eurpolymj.2011.01.002.
  74. E. Ramirez, S.G. Burillo, C. Barrera-Diaz, G. Roa and B. Bilyeu, J. Hazard. Mater., 192, 432 (2011); https://doi.org/10.1016/j.jhazmat.2011.04.109.
  75. W. Wu, J. Liu, S. Cao, H. Tan, J. Li, F. Xu and X. Zhang, Int. J. Pharm., 416, 104 (2011); https://doi.org/10.1016/j.ijpharm.2011.06.015.
  76. L. Yang and H. Liu, Powder Technol., 240, 54 (2013); https://doi.org/10.1016/j.powtec.2012.07.007.
  77. H.-I. Lee, J. Pietrasik, S.S. Sheiko and K. Matyjaszewski, Prog. Polym. Sci., 35, 24 (2010); https://doi.org/10.1016/j.progpolymsci.2009.11.002.
  78. A.K.A.S. Brun-Graeppi, C. Richard, M. Bessodes, D. Scherman and O.-W. Merten, J. Control. Release, 149, 209 (2011); https://doi.org/10.1016/j.jconrel.2010.09.023.
  79. M. Calderon, M.A. Quadir, M. Strumia and R. Haag, Biochimie, 92, 1242 (2010); https://doi.org/10.1016/j.biochi.2010.02.017.
  80. I. Luzinov, S. Minko and V.V. Tsukruk, Prog. Polym. Sci., 29, 635 (2004); https://doi.org/10.1016/j.progpolymsci.2004.03.001.
  81. D.A.Z. Wever, F. Picchioni and A.A. Broekhuis, Prog. Polym. Sci., 36, 1558 (2011); https://doi.org/10.1016/j.progpolymsci.2011.05.006.
  82. C. Zhao, S. Nie, M. Tang and S. Sun, Prog. Polym. Sci., 36, 1499 (2011); https://doi.org/10.1016/j.progpolymsci.2011.05.004.
  83. V.H.B. Ho, N.K.H. Slater and R. Chen, Biomaterials, 32, 2953 (2011); https://doi.org/10.1016/j.biomaterials.2011.01.010.
  84. M. Sauer, D. Streich and W. Meier, Adv. Mater., 13, 1649 (2001); https://doi.org/10.1002/1521-4095(200111)13:21<1649::AIDADMA1649>3.0.CO;2-E.
  85. E.G. Bellomo, M.D. Wyrsta, L. Pakstis, D.J. Pochan and T.J. Deming, Nat. Mater., 3, 244 (2004); https://doi.org/10.1038/nmat1093.
  86. Z. Huang, S. Liu, B. Zhang, L. Xu and X. Hu, Carbohydr. Polym., 88, 609 (2012); https://doi.org/10.1016/j.carbpol.2012.01.009.
  87. D.G. Shchukin, I.L. Radtchenko and G.B. Sukhorukov, Mater. Lett., 57, 1743 (2003); https://doi.org/10.1016/S0167-577X(02)01061-3.
  88. E.M. Shchukina and D.G. Shchukin, Curr. Opin. Colloid Interface Sci., 17, 281 (2012); https://doi.org/10.1016/j.cocis.2012.06.003.
  89. C.S. Satish, H.G. Shivakumar and N.V. Gupta, J. Indian Pharm. Sci., 69, 64 (2007); https://doi.org/10.4103/0250-474X.32110.
  90. P. Gupta, K. Vermani and S. Garg, Drug Discov. Today, 7, 569 (2002); https://doi.org/10.1016/S1359-6446(02)02255-9.
  91. Y. Qiu and K. Park, Adv. Drug Deliv. Rev., 64, 49 (2012); https://doi.org/10.1016/j.addr.2012.09.024.
  92. J. Hu and S. Liu, Macromolecules, 43, 8315 (2010); https://doi.org/10.1021/ma1005815.
  93. P. Bawa, V. Pillay, Y.E. Choonara and L.C. du Toit, Biomed. Mater., 4, 022001 (2009); https://doi.org/10.1088/1748-6041/4/2/022001.
  94. S.I. Kang and Y.H. Bae, J. Control. Release, 80, 145 (2002); https://doi.org/10.1016/S0168-3659(02)00021-4.
  95. S.I. Kang and Y.H. Bae, J. Control. Release, 86, 115 (2003); https://doi.org/10.1016/S0168-3659(02)00409-1.
  96. C. Ruan, K. Zeng and C.A. Grimes, Anal. Chim. Acta, 497, 123 (2003); https://doi.org/10.1016/j.aca.2003.08.051.
  97. H. Maruyama and H. Matsumoto, T. Fukuda and F.Arai, MicroElectro Mechanical Systems, MEMS 2008, IEEE 21st International Conference, pp. 224-227 (2008).
  98. K. Deligkaris, T.S. Tadele, W. Olthuis and A. Van Den Berg, Sens. Actuators B Chem., 147, 765 (2010); https://doi.org/10.1016/j.snb.2010.03.083.
  99. M. Mahkam, Drug Deliv., 14, 147 (2007); https://doi.org/10.1080/10717540601067745.
  100. D.A. Chiappetta and A. Sosnik, Eur. J. Pharm. Biopharm., 66, 303 (2007); https://doi.org/10.1016/j.ejpb.2007.03.022.
  101. M. Torres-Lugo and N.A. Peppas, Biomaterials, 21, 1191 (2000); https://doi.org/10.1016/S0142-9612(00)00011-9.
  102. S. Herber, J. Bomer, W. Olthuis, P. Bergveld and A.V. Berg, Biomed. Microdevices, 7, 197 (2005); https://doi.org/10.1007/s10544-005-3026-5.
  103. H.-J. Park, F. Yang and S.-W. Cho, Adv. Drug Deliv. Rev., 64, 40 (2012); https://doi.org/10.1016/j.addr.2011.09.005.
  104. C.H. Lee, J.-H. Kim, H.J. Lee, K. Jeon, H.J. Lim, H. Choi, E.-R. Lee, S.H. Park, J.-Y. Park, S. Hong, S. Kim and S.-G. Cho, Biomaterials, 32, 6683 (2011); https://doi.org/10.1016/j.biomaterials.2011.05.070.
  105. K. Kataoka, ICMENS 2004, International Conference on, 25-27 August 2004, Banff, Alberta, Canada, pp. 4-5 (20014).
  106. L. Wasungu and D. Hoekstra, J. Control. Release, 116, 255 (2006); https://doi.org/10.1016/j.jconrel.2006.06.024.
  107. B. Gupta, T.S. Levchenko and V.P. Torchilin, Adv. Drug Deliv. Rev., 57, 637 (2005); https://doi.org/10.1016/j.addr.2004.10.007.
  108. S.M. Henry, M.E.H. El-Sayed, C.M. Pirie, A.S. Hoffman and P.S. Stayton, Biomacromolecules, 7, 2407 (2006); https://doi.org/10.1021/bm060143z.
  109. D.W. Pack, A.S. Hoffman, S. Pun and P.S. Stayton, Nat. Rev. Drug Discov., 4, 581 (2005); https://doi.org/10.1038/nrd1775.
  110. M.S. Al-Dosari and X. Gao, AAPS J., 11, 671 (2009); https://doi.org/10.1208/s12248-009-9143-y.
  111. F.J. Xu, Y. Ping, J. Ma, G.P. Tang, W.T. Yang, J. Li, E.T. Kang and K.G. Neoh, Bioconjug. Chem., 20, 1449 (2009); https://doi.org/10.1021/bc900044h.
  112. J. Coelho, P. Ferreira, P. Alves, R. Cordeiro, A. Fonseca, J. Gois and M. Gil, EPMA J., 1, 164 (2010); https://doi.org/10.1007/s13167-010-0001-x.
  113. N. Sakaguchi, C. Kojima, A. Harada and K. Kono, Bioconjug. Chem., 19, 1040 (2008); https://doi.org/10.1021/bc7004736.
  114. H. Akiyama, A. Ito, Y. Kawabe and M. Kamihira, Biomaterials, 31, 1251 (2010); https://doi.org/10.1016/j.biomaterials.2009.11.017.
  115. S.-W. Kang, H.-W. Lim, S.-W. Seo, O. Jeon, M. Lee and B.-S. Kim, Biomaterials, 29, 1109 (2008); https://doi.org/10.1016/j.biomaterials.2007.11.004.
Read More
Author biographies is not available.
Download
PDF
Statistic
Read Counter : 0 Download : 0