Copyright (c) 2021 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Optimizing Parameters for the Remediation of Chromium(VI) Contaminated Groundwater on Tamil Nadu Chromates and Chemicals Limited (TCCL) Site of Ranipet, Tamilnadu using Electrocoagulation Process
Corresponding Author(s) : Vanitha Murugaiyan
Asian Journal of Chemistry,
Vol. 33 No. 2 (2021): Vol 33 Issue 2
Abstract
This paper presents the effects of variables such as electrode material, electrode distance, pH, initial concentration of Cr(VI), applied current, electrolyte and time duration in the treatment of contaminated groundwater for the removal of Cr(VI) at two different concentrations of 200 and 800 mg/L of Cr(VI) using batch electrocoagulation process. Initially, the conditions were optimized from synthetic contaminated water, which was in congruence with chloride and sulphate ions as present in the contaminated groundwater. The optimum conditions obtained on removal of Cr(VI) from synthetic contaminated water were applied in real Cr(VI) contaminated groundwater collected from a bore well at chromate ore processing residue (COPR) dumpsite. The results of the treated contaminated groundwater were found that all the parameters were within the limits of Pollution Control Board discharge standards. The efficiency and energy consumption on the removal of Cr(VI) from real contaminated groundwater were compared with and without addition of NaCl. The results suggest that the optimum conditions for a 99.99% removal efficiency were initial concentration 200 mg/L of Cr(VI), pH 6.0, applied current 2 A, electrolyte 2 g/L of NaCl, time duration 35 min and energy consumption 2.625 Whr/m3.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- G. Godgul and K.C. Sahu, Environ. Geol., 25, 251 (1995);https://doi.org/10.1007/BF00766754
- C.A. Basha, P. Soloman, M. Velan, L.R. Miranda, N. Balasubramanian and R. Siva, J. Hazard. Mater., 176, 154 (2010);https://doi.org/10.1016/j.jhazmat.2009.10.131
- D.E. Paul, J.T. Black and A.R. Kohser, Materials and Process in Manufacturing, Wiley: New York, edn 9, pp. 793-794 (2003).
- V. Murugaiyan and S. Kanmani, Indian J. Environ. Prot., 29, 304 (2009).
- B.K. Dey, M.A. Hashim, S. Hasan and B. Sen Gupta, Adv. Environ. Res., 8, 455 (2004);https://doi.org/10.1016/S1093-0191(02)00122-3
- C.N. Sivaramakrishnan, Textiles and the Environment, Colour Publications Pvt. Ltd.: Mumbai, India (2013).
- S.B. Kameswari Kanchinadham, V.D. Loganathan and C. Kalyanaraman, Environ. Prog. Sustain. Energy, 32, 1096 (2012);https://doi.org/10.1002/ep.11722
- M. Tang, F. Wang and M. Edwards, Environ. Eng. Sci., 35, 11 (2018);https://doi.org/10.1089/ees.2017.0088
- T. Sun, J. Chen, X. Lei and C. Zhou, J. Environ. Chem. Eng., 2, 304 (2014);https://doi.org/10.1016/j.jece.2013.12.022
- S. Hillier, M.J. Roe, J.S. Geelhoed, A.R. Fraser, J.G. Farmer and E. Paterson, Sci. Total Environ., 308, 195 (2003);https://doi.org/10.1016/S0048-9697(02)00680-0
- US EPA, Report No. EPA/570/9-76/003;Washington, DC (1976).
- Q. Liao, J. Tang, H. Wang, W. Yang, L. He, Y. Wang and Z. Yang, J. Hazard. Mater., 386, 121988 (2020);https://doi.org/10.1016/j.jhazmat.2019.121988
- A. Kumar, C. Guo, G. Sharma, D. Pathania, M. Naushad, S. Kalia and P. Dhiman, RSC Adv., 6, 13251 (2016);https://doi.org/10.1039/C5RA23372K
- Y. Zhao, Int. J. Electrochem. Sci., 3, 1250 (2018);https://doi.org/10.20964/2018.02.46
- S.U. Khan, D.T. Islam, I.H. Farooqi, S. Ayub and F. Basheer, Process Saf. Environ. Prot., 122, 118 (2019);https://doi.org/10.1016/j.psep.2018.11.024
- C. Pan, L.D. Troyer, P. Liao, J.G. Catalano, W. Li and D.E. Giammar, Environ. Sci. Technol., 51, 6308 (2017);https://doi.org/10.1021/acs.est.7b00371
- D. Ghernaout and N. Elboughdiri, Open Access Libr. J., 7, 1 (2020);https://doi.org/10.4236/oalib.1106396
- I. Korus and K. Loska, Desalination, 247, 390 (2009);https://doi.org/10.1016/j.desal.2008.12.036
- J. Jeyasingh and L. Philip, J. Hazard. Mater., 118, 113 (2005);https://doi.org/10.1016/j.jhazmat.2004.10.003
- G. Tamma Rao, V.V.S. Gurunadha and K. Ranganathan, J. Earth Syst. Sci., 22, 855 (2013);https://doi.org/10.1007/s12040-013-0295-x
- N. Venkatesan and M.A. Asokan, Int. J. ChemTech Res., 6, 3651 (2014).
- G. Darrie, Environ. Geochem. Health, 23, 187 (2001);https://doi.org/10.1023/A:1012295927081
- N. Parsa, A. Moheb, A. Mehrabani-Zeinabad and M.A. Masigol, Chem. Eng. Res. Des., 98, 81 (2015);https://doi.org/10.1016/j.cherd.2015.03.025
- A. Singh, A. Chaudhary and A. Sharma, Port. Electrochim. Acta, 30, 99 (2012);https://doi.org/10.4152/pea.201202099
- I.L. Mickova, Am. Sci. Res. J. Eng. Technol. Soc., 14, 273 (2015).
- L.E. Eary and D. Rai, Environ. Sci. Technol., 22, 972 (1988);https://doi.org/10.1021/es00173a018
- J. Fruchter, Environ. Sci. Technol., 36, 464A (2002);https://doi.org/10.1021/es022466i
- K. Ulucan, H.A. Kabuk, F. Ilhan and U. Kurt, Int. J. Electrochem. Sci., 9, 2316 (2014).
- B.M. Sass and D. Rai, Inorg. Chem., 26, 2228 (1987);https://doi.org/10.1021/ic00261a013
- M. Kobya, E. Gengec and E. Demirbas, Chem. Eng. Process.: Process Intensif., 101, 87 (2016);https://doi.org/10.1016/j.cep.2015.11.012
- E. Keshmirizadeh, S. Yousefi and M.K. Rofouei, J. Hazard. Mater., 190, 119 (2011);https://doi.org/10.1016/j.jhazmat.2011.03.010
- W.F. Ntengwe, N. Mazana and F. Samadi, Int. J. ChemTech Res., 2, 1289 (2010).
- S.S. Hamdan and M.H. El-Naas, J. Ind. Eng. Chem., 20, 2775 (2014);https://doi.org/10.1016/j.jiec.2013.11.006
References
G. Godgul and K.C. Sahu, Environ. Geol., 25, 251 (1995);https://doi.org/10.1007/BF00766754
C.A. Basha, P. Soloman, M. Velan, L.R. Miranda, N. Balasubramanian and R. Siva, J. Hazard. Mater., 176, 154 (2010);https://doi.org/10.1016/j.jhazmat.2009.10.131
D.E. Paul, J.T. Black and A.R. Kohser, Materials and Process in Manufacturing, Wiley: New York, edn 9, pp. 793-794 (2003).
V. Murugaiyan and S. Kanmani, Indian J. Environ. Prot., 29, 304 (2009).
B.K. Dey, M.A. Hashim, S. Hasan and B. Sen Gupta, Adv. Environ. Res., 8, 455 (2004);https://doi.org/10.1016/S1093-0191(02)00122-3
C.N. Sivaramakrishnan, Textiles and the Environment, Colour Publications Pvt. Ltd.: Mumbai, India (2013).
S.B. Kameswari Kanchinadham, V.D. Loganathan and C. Kalyanaraman, Environ. Prog. Sustain. Energy, 32, 1096 (2012);https://doi.org/10.1002/ep.11722
M. Tang, F. Wang and M. Edwards, Environ. Eng. Sci., 35, 11 (2018);https://doi.org/10.1089/ees.2017.0088
T. Sun, J. Chen, X. Lei and C. Zhou, J. Environ. Chem. Eng., 2, 304 (2014);https://doi.org/10.1016/j.jece.2013.12.022
S. Hillier, M.J. Roe, J.S. Geelhoed, A.R. Fraser, J.G. Farmer and E. Paterson, Sci. Total Environ., 308, 195 (2003);https://doi.org/10.1016/S0048-9697(02)00680-0
US EPA, Report No. EPA/570/9-76/003;Washington, DC (1976).
Q. Liao, J. Tang, H. Wang, W. Yang, L. He, Y. Wang and Z. Yang, J. Hazard. Mater., 386, 121988 (2020);https://doi.org/10.1016/j.jhazmat.2019.121988
A. Kumar, C. Guo, G. Sharma, D. Pathania, M. Naushad, S. Kalia and P. Dhiman, RSC Adv., 6, 13251 (2016);https://doi.org/10.1039/C5RA23372K
Y. Zhao, Int. J. Electrochem. Sci., 3, 1250 (2018);https://doi.org/10.20964/2018.02.46
S.U. Khan, D.T. Islam, I.H. Farooqi, S. Ayub and F. Basheer, Process Saf. Environ. Prot., 122, 118 (2019);https://doi.org/10.1016/j.psep.2018.11.024
C. Pan, L.D. Troyer, P. Liao, J.G. Catalano, W. Li and D.E. Giammar, Environ. Sci. Technol., 51, 6308 (2017);https://doi.org/10.1021/acs.est.7b00371
D. Ghernaout and N. Elboughdiri, Open Access Libr. J., 7, 1 (2020);https://doi.org/10.4236/oalib.1106396
I. Korus and K. Loska, Desalination, 247, 390 (2009);https://doi.org/10.1016/j.desal.2008.12.036
J. Jeyasingh and L. Philip, J. Hazard. Mater., 118, 113 (2005);https://doi.org/10.1016/j.jhazmat.2004.10.003
G. Tamma Rao, V.V.S. Gurunadha and K. Ranganathan, J. Earth Syst. Sci., 22, 855 (2013);https://doi.org/10.1007/s12040-013-0295-x
N. Venkatesan and M.A. Asokan, Int. J. ChemTech Res., 6, 3651 (2014).
G. Darrie, Environ. Geochem. Health, 23, 187 (2001);https://doi.org/10.1023/A:1012295927081
N. Parsa, A. Moheb, A. Mehrabani-Zeinabad and M.A. Masigol, Chem. Eng. Res. Des., 98, 81 (2015);https://doi.org/10.1016/j.cherd.2015.03.025
A. Singh, A. Chaudhary and A. Sharma, Port. Electrochim. Acta, 30, 99 (2012);https://doi.org/10.4152/pea.201202099
I.L. Mickova, Am. Sci. Res. J. Eng. Technol. Soc., 14, 273 (2015).
L.E. Eary and D. Rai, Environ. Sci. Technol., 22, 972 (1988);https://doi.org/10.1021/es00173a018
J. Fruchter, Environ. Sci. Technol., 36, 464A (2002);https://doi.org/10.1021/es022466i
K. Ulucan, H.A. Kabuk, F. Ilhan and U. Kurt, Int. J. Electrochem. Sci., 9, 2316 (2014).
B.M. Sass and D. Rai, Inorg. Chem., 26, 2228 (1987);https://doi.org/10.1021/ic00261a013
M. Kobya, E. Gengec and E. Demirbas, Chem. Eng. Process.: Process Intensif., 101, 87 (2016);https://doi.org/10.1016/j.cep.2015.11.012
E. Keshmirizadeh, S. Yousefi and M.K. Rofouei, J. Hazard. Mater., 190, 119 (2011);https://doi.org/10.1016/j.jhazmat.2011.03.010
W.F. Ntengwe, N. Mazana and F. Samadi, Int. J. ChemTech Res., 2, 1289 (2010).
S.S. Hamdan and M.H. El-Naas, J. Ind. Eng. Chem., 20, 2775 (2014);https://doi.org/10.1016/j.jiec.2013.11.006