This work is licensed under a Creative Commons Attribution 4.0 International License.
Excess Thermodynamic Parameters of Binary Liquid Mixtures of Dimethyl Malonate with Isomeric Xylenes at Different Temperatures
Corresponding Author(s) : K Pavan Krishna
Asian Journal of Chemistry,
Vol. 36 No. 4 (2024): Vol 36 Issue 4, 2024
Abstract
Over the complete composition range of mole fractions, densities and ultrasonic velocities of binary liquid mixtures of dimethyl malonate with o-xylene, p-xylene and m-xylene were investigated at 303.15-318.15 K. These parameters were chosen to investigate the impact of substituents and specific locations on several thermodynamic characteristics of binary mixtures. The deviation in adiabatic compressibility (∆βad), excess molar volume (VE) and excess intermolecular free length (LfE) were estimated using the experimental measurements. These extraneous parameters are fitted to a polynomial equation of the Redlich-Kister type. Along with the obtained parameter values, the standard deviation (σ) was also determined.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- G.R. Satyanarayana, D.B. Karuna Kumar, K. Sujatha, G. Lakshmanarao and C. Rambabu, J. Mol. Liq., 216, 526 (2016); https://doi.org/10.1016/j.molliq.2016.01.054
- R. Koningsveld and R.F.T. Stepto, Macromolecules, 10, 1166 (1977); https://doi.org/10.1021/ma60059a052
- M.I. Aralaguppi, T.M. Aminabhavi, S.B. Harogoppad and R.H. Balundgi, J. Chem. Eng. Data, 37, 298 (1992); https://doi.org/10.1021/je00007a006
- L. Morávková and J. Linek, J. Chem. Thermodyn., 35, 1139 (2003); https://doi.org/10.1016/S0021-9614(03)00077-6
- B. Giner, S. Martin, H. Artigas, M.C. Lopez and C. Lafuente, J. Phys. Chem. B, 110, 17683 (2006); https://doi.org/10.1021/jp062583q
- I. Vibhu, M. Gupta and J.P. Shukla, WCU Paris, 7, 1355 (2003).
- T.S. Savale and J.M. Shewale, J. Interdiscipl. Cycle Res., XII, VI (2020).
- M.S. Rahman and M. Habibullah, Indon. J. Chem. Anal., 3, 1 (2020). https://doi.org/10.20885/ijca.vol3.iss1.art1
- J. Vuksanoviæ, D. Soldatoviæ, I. Radoviæ, Z. Višak and M. Kijevèanin, J. Chem. Thermodyn., 131, 393 (2019); https://doi.org/10.1016/j.jct.2018.11.020
- V.N.S.R. Venkateswararao, G.R. Satyanarayana, S.K. Beebi and C. Rambabu, Chem. Sci. Trans., 7, 211 (2018).
- M.K.M.Z. Hyder, M.A. Saleh, F. Hossain, S.H. Mir, K. Iwakabe and I.M.M. Rahman, J. Chem. Eng. Data, 63, 1370 (2018); https://doi.org/10.1021/acs.jced.7b00971
- S.M. Hossain, S. Akhtar and F. Verpoort, J. Chem. Eng. Data, 63, 1885 (2018); https://doi.org/10.1021/acs.jced.7b01003
- M. Almasi, J. Med. Chemical Sci., 1, 23 (2018); https://doi.org/10.26655/jmchemsci.2018.6.6
- A.A. Kadhem, Ibn Al-Haitham J. Pure Appl. Sci., 23, 98 (2010).
- A.K. Nain, R. Sharma, A. Ali and S. Gopal, J. Chem. Eng. Data, 53, 2654 (2008); https://doi.org/10.1021/je800579j
- Z. Zhuang, J. Zhang, X. Liu and D. Liu, J. Chem. Thermodyn., 101, 190 (2016); https://doi.org/10.1016/j.jct.2016.05.016
- Y.C. Morey, S.L. Dahire and P.S. Agrawal, Int. J. Res. Biosci. Agric. Technol., 2, 235 (2015).
- S.K. Fakruddin, Ch. Srinivasu and K. Narendra, J. Chem. Pharm. Res., 7, 488 (2015).
- M. Srilatha, D. Chinnarao, C.H.V. Padmarao and B.V. Saradhi, J. Chem. Chem. Sci., 5, 364 (2015).
- N.A. Dokhe and J. Dokhe, Int. J. Eng. Res. Appl., 11, 18 (2021).
- A. Jahan, M.A. Alam, M.M.H. Hasan and S. Akhtar, J. Chem. Chem. Sci., 9, 115 (2021); https://doi.org/10.29055/jccs/704
- A.K. Nain, N. Chaudhary, Ankita, J. Gupta and P. Chandra, J. Chem. Thermodyn., 108, 145 (2017); https://doi.org/10.1016/j.jct.2017.01.016
- D. Ramachandran, N.G. Devi and N.V.N.B. Srinivasa Rao, Korean J. Chem. Eng., 35, 1919 (2018); https://doi.org/10.1007/s11814-018-0104-y
- A.K. Nain, R. Sharma, A. Ali and S. Gopal, J. Mol. Liq., 144, 124 (2009); https://doi.org/10.1016/j.molliq.2008.09.008
- N.V. Sastry, R.R. Thakor and M.C. Patel, J. Mol. Liq., 144, 13 (2009); https://doi.org/10.1016/j.molliq.2008.09.006
- C. Yang, P. Ma and Q. Zhou, J. Chem. Eng. Data, 49, 881 (2004); https://doi.org/10.1021/je0341920
- B. Nagarjun, A.V. Sarma, G.V. Rama Rao and C. Rambabu, J. Thermodyn., 2013, 285796 (2013); https://doi.org/10.1155/2013/285796
- R. Kumar Bhardwaj and A. Pal, J. Mol. Liq., 18, 37 (2005); https://doi.org/10.1016/j.molliq.2004.07.007
- P.S. Nikam, B.S. Jagdale, A.B. Sawant and M. Hasan, J. Pure Appl. Utrason., 22, 115 (2000).
References
G.R. Satyanarayana, D.B. Karuna Kumar, K. Sujatha, G. Lakshmanarao and C. Rambabu, J. Mol. Liq., 216, 526 (2016); https://doi.org/10.1016/j.molliq.2016.01.054
R. Koningsveld and R.F.T. Stepto, Macromolecules, 10, 1166 (1977); https://doi.org/10.1021/ma60059a052
M.I. Aralaguppi, T.M. Aminabhavi, S.B. Harogoppad and R.H. Balundgi, J. Chem. Eng. Data, 37, 298 (1992); https://doi.org/10.1021/je00007a006
L. Morávková and J. Linek, J. Chem. Thermodyn., 35, 1139 (2003); https://doi.org/10.1016/S0021-9614(03)00077-6
B. Giner, S. Martin, H. Artigas, M.C. Lopez and C. Lafuente, J. Phys. Chem. B, 110, 17683 (2006); https://doi.org/10.1021/jp062583q
I. Vibhu, M. Gupta and J.P. Shukla, WCU Paris, 7, 1355 (2003).
T.S. Savale and J.M. Shewale, J. Interdiscipl. Cycle Res., XII, VI (2020).
M.S. Rahman and M. Habibullah, Indon. J. Chem. Anal., 3, 1 (2020). https://doi.org/10.20885/ijca.vol3.iss1.art1
J. Vuksanoviæ, D. Soldatoviæ, I. Radoviæ, Z. Višak and M. Kijevèanin, J. Chem. Thermodyn., 131, 393 (2019); https://doi.org/10.1016/j.jct.2018.11.020
V.N.S.R. Venkateswararao, G.R. Satyanarayana, S.K. Beebi and C. Rambabu, Chem. Sci. Trans., 7, 211 (2018).
M.K.M.Z. Hyder, M.A. Saleh, F. Hossain, S.H. Mir, K. Iwakabe and I.M.M. Rahman, J. Chem. Eng. Data, 63, 1370 (2018); https://doi.org/10.1021/acs.jced.7b00971
S.M. Hossain, S. Akhtar and F. Verpoort, J. Chem. Eng. Data, 63, 1885 (2018); https://doi.org/10.1021/acs.jced.7b01003
M. Almasi, J. Med. Chemical Sci., 1, 23 (2018); https://doi.org/10.26655/jmchemsci.2018.6.6
A.A. Kadhem, Ibn Al-Haitham J. Pure Appl. Sci., 23, 98 (2010).
A.K. Nain, R. Sharma, A. Ali and S. Gopal, J. Chem. Eng. Data, 53, 2654 (2008); https://doi.org/10.1021/je800579j
Z. Zhuang, J. Zhang, X. Liu and D. Liu, J. Chem. Thermodyn., 101, 190 (2016); https://doi.org/10.1016/j.jct.2016.05.016
Y.C. Morey, S.L. Dahire and P.S. Agrawal, Int. J. Res. Biosci. Agric. Technol., 2, 235 (2015).
S.K. Fakruddin, Ch. Srinivasu and K. Narendra, J. Chem. Pharm. Res., 7, 488 (2015).
M. Srilatha, D. Chinnarao, C.H.V. Padmarao and B.V. Saradhi, J. Chem. Chem. Sci., 5, 364 (2015).
N.A. Dokhe and J. Dokhe, Int. J. Eng. Res. Appl., 11, 18 (2021).
A. Jahan, M.A. Alam, M.M.H. Hasan and S. Akhtar, J. Chem. Chem. Sci., 9, 115 (2021); https://doi.org/10.29055/jccs/704
A.K. Nain, N. Chaudhary, Ankita, J. Gupta and P. Chandra, J. Chem. Thermodyn., 108, 145 (2017); https://doi.org/10.1016/j.jct.2017.01.016
D. Ramachandran, N.G. Devi and N.V.N.B. Srinivasa Rao, Korean J. Chem. Eng., 35, 1919 (2018); https://doi.org/10.1007/s11814-018-0104-y
A.K. Nain, R. Sharma, A. Ali and S. Gopal, J. Mol. Liq., 144, 124 (2009); https://doi.org/10.1016/j.molliq.2008.09.008
N.V. Sastry, R.R. Thakor and M.C. Patel, J. Mol. Liq., 144, 13 (2009); https://doi.org/10.1016/j.molliq.2008.09.006
C. Yang, P. Ma and Q. Zhou, J. Chem. Eng. Data, 49, 881 (2004); https://doi.org/10.1021/je0341920
B. Nagarjun, A.V. Sarma, G.V. Rama Rao and C. Rambabu, J. Thermodyn., 2013, 285796 (2013); https://doi.org/10.1155/2013/285796
R. Kumar Bhardwaj and A. Pal, J. Mol. Liq., 18, 37 (2005); https://doi.org/10.1016/j.molliq.2004.07.007
P.S. Nikam, B.S. Jagdale, A.B. Sawant and M. Hasan, J. Pure Appl. Utrason., 22, 115 (2000).