Main Article Content
Abstract
This work describes an efficient method to synthesize and
characterization of polythiophene/titanium dioxide (PTP/TiO2)
nanocomposites by one-step in situ polymerization of thiophene,
using FeCl3 as an oxidant in the presence of different amount of TiO2
nanoparticles. The obtained nanocomposites were characterized
by Fourier-transform infrared, X-ray diffraction, thermogravimetric
analysis, scanning electron microscope and the conductivity by four
point probe technique. The obtained results confirmed that TiO2
nanoparticles are encapsulated by polythiophene.
Keywords
Article Details
Copyright (c) 2016 Mirzaagha Babazadeh
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
- D.W. Hatchett and M. Josowicz, Chem. Rev., 108, 746 (2008); https://doi.org/10.1021/cr068112h.
- U. Lange, N.V. Roznyatovskaya and V.M. Mirsky, Anal. Chim. Acta, 614, 1 (2008); https://doi.org/10.1016/j.aca.2008.02.068.
- T. Umeda, Y. Hashimoto, H. Mizukami, T. Shirakawa, A. Fujii and K. Yoshino, Synth. Met., 152, 93 (2005); https://doi.org/10.1016/j.synthmet.2005.07.172.
- M. Babazadeh, M. Sheidaei and S. Sattary, Synth. React. Inorg. Met.-Org. Nano-Met. Chem., 44, 819 (2014); https://doi.org/10.1080/15533174.2013.791842.
- M. Babazadeh, F. Rezazad Gohari and A. Olad, J. Appl. Polym. Sci., 123, 1922 (2012); https://doi.org/10.1002/app.34689.
- M. Babazadeh, F. Zalloi and A. Olad, Synth. React. Inorg. Met.-Org. Nano-Met. Chem., 45, 86 (2015); https://doi.org/10.1080/15533174.2013.818687.
- Y. He, Powder Technol., 147, 59 (2004); https://doi.org/10.1016/j.powtec.2004.09.038.
- Y.C. Liu, J.M. Huang, C.E. Tsai, T.C. Chuang and C.C. Wang, Chem. Phys. Lett., 387, 155 (2004); https://doi.org/10.1016/j.cplett.2004.02.014.
- R. Gangopadhyay and A. De, Chem. Mater., 12, 608 (2000); https://doi.org/10.1021/cm990537f.
- S.S. Ray and M. Biswas, J. Appl. Polym. Sci., 73, 2971 (1999); https://doi.org/10.1002/(SICI)1097-4628(19990929)73:14<2971::AID-APP21>3.0.CO;2-S.
- M. Biswas, S. Sinha Ray and Y. Liu, Synth. Met., 105, 99 (1999); https://doi.org/10.1016/S0379-6779(99)00049-1.
- N. Toshima and S. Hara, Prog. Polym. Sci., 20, 155 (1995); https://doi.org/10.1016/0079-6700(94)00029-2.
- Z. Seyedzavar and M. Babazadeh, Synth. React. Inorg. Met.-Org. Nano-Met. Chem., 46, 389 (2016); https://doi.org/10.1080/15533174.2014.988792.
References
D.W. Hatchett and M. Josowicz, Chem. Rev., 108, 746 (2008); https://doi.org/10.1021/cr068112h.
U. Lange, N.V. Roznyatovskaya and V.M. Mirsky, Anal. Chim. Acta, 614, 1 (2008); https://doi.org/10.1016/j.aca.2008.02.068.
T. Umeda, Y. Hashimoto, H. Mizukami, T. Shirakawa, A. Fujii and K. Yoshino, Synth. Met., 152, 93 (2005); https://doi.org/10.1016/j.synthmet.2005.07.172.
M. Babazadeh, M. Sheidaei and S. Sattary, Synth. React. Inorg. Met.-Org. Nano-Met. Chem., 44, 819 (2014); https://doi.org/10.1080/15533174.2013.791842.
M. Babazadeh, F. Rezazad Gohari and A. Olad, J. Appl. Polym. Sci., 123, 1922 (2012); https://doi.org/10.1002/app.34689.
M. Babazadeh, F. Zalloi and A. Olad, Synth. React. Inorg. Met.-Org. Nano-Met. Chem., 45, 86 (2015); https://doi.org/10.1080/15533174.2013.818687.
Y. He, Powder Technol., 147, 59 (2004); https://doi.org/10.1016/j.powtec.2004.09.038.
Y.C. Liu, J.M. Huang, C.E. Tsai, T.C. Chuang and C.C. Wang, Chem. Phys. Lett., 387, 155 (2004); https://doi.org/10.1016/j.cplett.2004.02.014.
R. Gangopadhyay and A. De, Chem. Mater., 12, 608 (2000); https://doi.org/10.1021/cm990537f.
S.S. Ray and M. Biswas, J. Appl. Polym. Sci., 73, 2971 (1999); https://doi.org/10.1002/(SICI)1097-4628(19990929)73:14<2971::AID-APP21>3.0.CO;2-S.
M. Biswas, S. Sinha Ray and Y. Liu, Synth. Met., 105, 99 (1999); https://doi.org/10.1016/S0379-6779(99)00049-1.
N. Toshima and S. Hara, Prog. Polym. Sci., 20, 155 (1995); https://doi.org/10.1016/0079-6700(94)00029-2.
Z. Seyedzavar and M. Babazadeh, Synth. React. Inorg. Met.-Org. Nano-Met. Chem., 46, 389 (2016); https://doi.org/10.1080/15533174.2014.988792.