Copyright (c) 2021 AJC
This work is licensed under a Creative Commons Attribution 4.0 International License.
Preparation of Polycaprolactone-Graphene Oxide Hydrogel as Potential Drug Delivery Carrier
Corresponding Author(s) : J. Dalagan
Asian Journal of Chemistry,
Vol. 33 No. 10 (2021): Vol 33 Issue 10, 2021
Abstract
Polycaprolactone-graphene oxide (PCL-GO) hydrogel composite was prepared using a facile method and characterized by Fourier transform Infrared (FTIR) and scanning electron microscopy (SEM). The swelling capacity of the hydrogel at varying temperature and equilibration time was also determined. IR analysis revealed a shifting of bands, which indicates H-bonding interactions between polycaprolactone and graphene oxide. Characteristic peaks of graphene oxide at 3500 cm-1 for -OH stretching and peaks of polycaprolactone at 1456, 1370, 1304 cm-1 for CH2 bending vibrations were observed. SEM images validated IR results with the occurrence of larger hollow regions, pores and insets indicating reaction of OH groups with the polymeric chains. The swelling ratio of the PCL-GO hydrogel was higher than polycaprolactone and graphene oxide at 4 h and 8 h equilibration time. The swelling ratio of PCL-GO at 40 ºC and 12 h equilibration time was 4.3, which was the highest among the swelling ratios. These data could imply that the PCL-GO prepared has the potential to be a potential drug carrier.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
- Q. Chai, Y. Jiao and X. Yu, Gels, 3, 6 ( 2017); https://doi.org/10.3390/gels3010006
- S. Liu, J. Yu, H. Li, K. Wang, G. Wu, B. Wang, M. Liu, Y. Zhang, Y.P. Wang, J. Zhang, J. Wu, Y. Jing, F. Li and M. Zhang, Polymers, 12, 288 (2020); https://doi.org/10.3390/polym12020288
- S. Sahoo, A. Sasmal, D. Sahoo and P. Nayak, J. Appl. Polym. Sci., 118, 3167 (2010); https://doi.org/10.1002/app.32474
- J. Liu, L. Reni, Q. Wei, J. Wu, S. Liu, Y. Wang and G. Li, Express Polym. Lett., 5, 742 (2011); https://doi.org/10.3144/expresspolymlett.2011.72
- M.O. Aydogdu, N. Ekren, M. Suleymanoglu, S. Erdem-Kuruca, C. Lin, E. Bulbul, M.N. Erdol, F.N. Oktar, U.K. Terzi, O. Kilic and O. Gunduz, Colloids Surf. B Biointerfaces, 172, 718 (2018); https://doi.org/10.1016/j.colsurfb.2018.09.035
- R. Dwivedi, S. Kumar, R. Pandey, A. Mahajan, D. Nandana, D. Katti and D. Mehrotra, J. Oral Biol. Craniofac. Res., 10, 381 (2020); https://doi.org/10.1016/j.jobcr.2019.10.003
- R. Rajitha and K.N. Mohana, Mater. Chem. Phys., 241, 122050 (2020); https://doi.org/10.1016/j.matchemphys.2019.122050
- A. Ghawanmeh, G.A.M. Ali, H. Algarni, S.M. Sarkar and K.F. Chong, Nano Res., 12, 973 (2019); https://doi.org/10.1007/s12274-019-2300-4
- H. Bai, C. Li, X. Wang and G. Shi, Chem. Commun., 46, 2376 (2010); https://doi.org/10.1039/c000051e
- M. Rasoulzadeh and H. Namazi, Carbohydr. Polym., 168, 320 (2017); https://doi.org/10.1016/j.carbpol.2017.03.014
- A. Maio, M. Gammino, E.F. Gulino, B. Megna, P. Fara and R. Scaffaro, ACS Appl. Polym. Mater., 2, 4993 (2020); https://doi.org/10.1021/acsapm.0c00852
- J.M. Unagolla and A.C. Jayasuriya, Mater. Sci. Eng. C, 102, 1 (2019); https://doi.org/10.1016/j.msec.2019.04.026
- F. Rostami, E. Tamjid and M. Behmanesh, Mater. Sci. Eng. C, 115, 111102 (2020); https://doi.org/10.1016/j.msec.2020.111102
- K. Saeed, S.Y. Park, H.J. Lee, J.B. Baek and W.S. Huh, Polymer, 47, 8019 (2006); https://doi.org/10.1016/j.polymer.2006.09.012
- R. Ibale and S. Chakraborty, Master’s Thesis, Ateneo de Manila University, Quezon City (2012).
- L. Hua, W. Kai and Y. Inoue, J. Appl. Polym. Sci., 106, 1880 (2007); https://doi.org/10.1002/app.26503
- V. Castillo and J. Dalagan, Bull. Mater. Sci., 39, 1461 (2016); https://doi.org/10.1007/s12034-016-1293-9
- M. Bagheri and A. Mahmoodzadeh, J. Inorg. Organomet. Polym., 30, 1566 (2020); https://doi.org/10.1007/s10904-019-01340-8
- S. Thomas, S. Mahendran and R. Selvakumar, J. Drug Deliv. Ther., 8, 81 (2018); https://doi.org/10.22270/jddt.v8i5.1854
- B. Dharmadhikari, Q. Wu, D. Debnath and P. Patra, Conference: 2019 IEEE Long Island Systems, Applications and Technology Conference (LISAT) (2019).
- S. Evlashin, P. Dyakonov, M. Tarkhov, S. Dagesyan, S. Rodionov, A. Shpichka, M. Kostenko, S. Konev, I. Sergeichev, P. Timashev and I. Akhatov, Materials, 12, 2991 (2019); https://doi.org/10.3390/ma12182991
- A.J. Campillo-Fernández, P. González-Reed, A. Vidaurre and I. CastillaCortázar, Mater. Express, 10, 892 (2020); https://doi.org/10.1166/mex.2020.1728
- N.V. Gupta and H.G. Shivakumar, Iran. J. Pharm. Res., 11, 481 (2012).
- W. Wang and A. Wang, Carbohydr. Polym., 80, 1028 (2010); https://doi.org/10.1016/j.carbpol.2010.01.020
References
Q. Chai, Y. Jiao and X. Yu, Gels, 3, 6 ( 2017); https://doi.org/10.3390/gels3010006
S. Liu, J. Yu, H. Li, K. Wang, G. Wu, B. Wang, M. Liu, Y. Zhang, Y.P. Wang, J. Zhang, J. Wu, Y. Jing, F. Li and M. Zhang, Polymers, 12, 288 (2020); https://doi.org/10.3390/polym12020288
S. Sahoo, A. Sasmal, D. Sahoo and P. Nayak, J. Appl. Polym. Sci., 118, 3167 (2010); https://doi.org/10.1002/app.32474
J. Liu, L. Reni, Q. Wei, J. Wu, S. Liu, Y. Wang and G. Li, Express Polym. Lett., 5, 742 (2011); https://doi.org/10.3144/expresspolymlett.2011.72
M.O. Aydogdu, N. Ekren, M. Suleymanoglu, S. Erdem-Kuruca, C. Lin, E. Bulbul, M.N. Erdol, F.N. Oktar, U.K. Terzi, O. Kilic and O. Gunduz, Colloids Surf. B Biointerfaces, 172, 718 (2018); https://doi.org/10.1016/j.colsurfb.2018.09.035
R. Dwivedi, S. Kumar, R. Pandey, A. Mahajan, D. Nandana, D. Katti and D. Mehrotra, J. Oral Biol. Craniofac. Res., 10, 381 (2020); https://doi.org/10.1016/j.jobcr.2019.10.003
R. Rajitha and K.N. Mohana, Mater. Chem. Phys., 241, 122050 (2020); https://doi.org/10.1016/j.matchemphys.2019.122050
A. Ghawanmeh, G.A.M. Ali, H. Algarni, S.M. Sarkar and K.F. Chong, Nano Res., 12, 973 (2019); https://doi.org/10.1007/s12274-019-2300-4
H. Bai, C. Li, X. Wang and G. Shi, Chem. Commun., 46, 2376 (2010); https://doi.org/10.1039/c000051e
M. Rasoulzadeh and H. Namazi, Carbohydr. Polym., 168, 320 (2017); https://doi.org/10.1016/j.carbpol.2017.03.014
A. Maio, M. Gammino, E.F. Gulino, B. Megna, P. Fara and R. Scaffaro, ACS Appl. Polym. Mater., 2, 4993 (2020); https://doi.org/10.1021/acsapm.0c00852
J.M. Unagolla and A.C. Jayasuriya, Mater. Sci. Eng. C, 102, 1 (2019); https://doi.org/10.1016/j.msec.2019.04.026
F. Rostami, E. Tamjid and M. Behmanesh, Mater. Sci. Eng. C, 115, 111102 (2020); https://doi.org/10.1016/j.msec.2020.111102
K. Saeed, S.Y. Park, H.J. Lee, J.B. Baek and W.S. Huh, Polymer, 47, 8019 (2006); https://doi.org/10.1016/j.polymer.2006.09.012
R. Ibale and S. Chakraborty, Master’s Thesis, Ateneo de Manila University, Quezon City (2012).
L. Hua, W. Kai and Y. Inoue, J. Appl. Polym. Sci., 106, 1880 (2007); https://doi.org/10.1002/app.26503
V. Castillo and J. Dalagan, Bull. Mater. Sci., 39, 1461 (2016); https://doi.org/10.1007/s12034-016-1293-9
M. Bagheri and A. Mahmoodzadeh, J. Inorg. Organomet. Polym., 30, 1566 (2020); https://doi.org/10.1007/s10904-019-01340-8
S. Thomas, S. Mahendran and R. Selvakumar, J. Drug Deliv. Ther., 8, 81 (2018); https://doi.org/10.22270/jddt.v8i5.1854
B. Dharmadhikari, Q. Wu, D. Debnath and P. Patra, Conference: 2019 IEEE Long Island Systems, Applications and Technology Conference (LISAT) (2019).
S. Evlashin, P. Dyakonov, M. Tarkhov, S. Dagesyan, S. Rodionov, A. Shpichka, M. Kostenko, S. Konev, I. Sergeichev, P. Timashev and I. Akhatov, Materials, 12, 2991 (2019); https://doi.org/10.3390/ma12182991
A.J. Campillo-Fernández, P. González-Reed, A. Vidaurre and I. CastillaCortázar, Mater. Express, 10, 892 (2020); https://doi.org/10.1166/mex.2020.1728
N.V. Gupta and H.G. Shivakumar, Iran. J. Pharm. Res., 11, 481 (2012).
W. Wang and A. Wang, Carbohydr. Polym., 80, 1028 (2010); https://doi.org/10.1016/j.carbpol.2010.01.020